Counting matching models…
I needed some sturdy wall hooks, so I created these models in CAD. But to be honest: In the modeling I oriented myself on the wall hooks that have already been installed in my apartment for 20 years. From that point of view, this is a…
This is the second version of my Halloween Pumpkin Mug. Compared to the predecessor I uploaded on Thingiverse about a year ago ( https://www.thingiverse.com/thing:5545774 ), I improved the handle and the bottom a bit. Supports for eyes,…
Update: Second, smaller version uploaded! Both versions of the holder are printed in one piece each. The first version is 10 cm high on the print bed and has an inner diameter of at least 8 cm. When unfolded, the holder consisting of four…
I needed a holder for my Bosch Professional batteries (blue devices). A model that I had downloaded from Thingiverse was unfortunately difficult to print and needed supports. I therefore created my own version that does not need supports.…
When I assembled my Original Prusa Enclosure and used it for the first time, I was a bit surprised at the volume coming from the doors vibrating. In general, the doors were very wobbly. The remedy was these reinforcements I designed,…
I wanted to replace my old pen holder and a note box that were on my desk with a more space efficient version. I have found many pen holders here, but none that also includes a box for notes. That's why I designed this model. Two-piece…
This is part three of my enhancements/addons for the Original Prusa Enclosure (see my other models here on Printables). In addition to the two spool holders inside the Enclosure, I wanted a spool holder on top of the case. So I designed a…
I've been using the “Cat litter scoop” from @EvaMika_51631 for a few months now. EvaMika offers this scoop as a two-part model that has to be glued after printing, but also as a complete scoop that is printed in one printing process. It…
Race Car Seat Holder I'm sure you're all familiar with the smartphone stand in the shape of a race car seat. If not, here's some info: The oldest copy of the seat I found is from 2021, https://www.thingiverse.com/thing:4779381. This one…
This is a mod of my own "Stiffeners for Original Prusa Enclosure doors". User @js500 asked in a comment for a remix of my stiffening elements with the (great!) "Prusa Enclosure Lift-off Door Hinge" by @Heyus_277343 . I didn't know about…
Update April 2025: Now with three versions, for cables up to 4 mm, 5 mm and 6 mm in diameter On my Original Prusa Enclosure is mounted a Raspberry Pi with a touchscreen and also a filament dryer stands on top of the box. Both devices have…
For the Bambu Lab AMS, it makes sense to use a spool weight for almost empty and very light filament rolls so that the spool remains on the rollers of the AMS while the filament is being fed. For example the spool weight with integrated…
The battery charger Bosch AL 1880 CV takes up a lot of space on the table or shelf. So why not hang it on the wall? With this holder, the attachment to the wall is done quickly. Two parts, one mount and one latch. Print the mount with…
You can hide the Lenovo docking station under the desk with these mounts and remove it again in no time. The two triangular brackets are screwed under the table near the edge, using 3mm screws. The two holders are slid over the docking…
I had printed 3D models for a filament dry box that I had downloaded elsewhere. However, this dry box did not work as it should. On the first print from the box, the filament roll jumped over the edge of the rollers, the roll jammed and…
Storage frames with two identical end pieces, adjustable in length by connecting pieces. Requires at least 6 M3x12 Allen screws and nuts for one segment (for 2 or 3 beer bottles, unstacked). Extended to two segments (2+2/2+3/3+3) it…
Update: I added a new model for the insert, which can be used with a 50 Euro Cent coin (24.3 x 2.4 mm), instead of the washer for M12 bolts (23 x 1.9 mm) This is a bottle opener in the shape of a long neck bottle, like German breweries…
Around the time w00h uploaded his "Kitchen Packet Organizer" ( https://www.printables.com/de/model/706552-kitchen-packet-organizer ) here, I was also in the process of reorganizing my kitchen with a few printed helpers. If you have…
My daughters' cosmetics used to be stored in little bags. The things they were looking for were hard to find and sometimes, for example, a lipstick would open and make all the other products in the bag dirty. With this stand, the small,…
I created these bookends for the shelf in my daughter's room. Visually, the bookends are based on the Joy-Con controllers of the Nintendo Switch. The two bookends consist of a total of six parts. After printing, the parts for both sides…
This box was designed for the needs you have, when you caught a cold. Something that is aimed to stay on your living room table or elsewhere near your couch. It has a trash bin and a tray where you can store some medicines, like…
Our cats are no longer so picky when it comes to their food, because we always mix different types of food in their bowls. However, this means that half of the contents always remains in a cat food bag. We use this holder to prevent it…
This is an easy and quick to print tool, a little helper for the workshop. In conjunction with seven 8x3mm magnets, it holds a number of screws while you work on your project. I have created three different sizes. Maybe one of them…
A few months ago I posted a make on printables. It was a “Butt Lamp” (NSFW, no direct link here). For that lamp I created a spiral core to hold an LED strip on the outside, with enough space on the inside, to put the electronics into it.…
I use the silica gel containers from @gdrag ( https://www.printables.com/model/65922-silica-gel-spool-container) and @brunocubateli ( https://www.printables.com/model/368229-pancake-silica-gel-container ). Since I wanted to stock up on a…
I own a Qidi X-Max 3, which has the filament feeder at the back, including a dry box that is attached to the back of the printer. The printer stands in the corner of a cabinet, under a shelf board. It is almost impossible to use the dry…
I made this remote holder for a friend. She needed something to organize her three large and three small remote controls, as well as her reading glasses. The compartments are wide enough for remotes with a width of just over 5 cm. To…
After I had upgraded my Prusa MK3S+ with the Revo hotend (Revo Six, fully loaded), I also needed a storage option for the nozzles. My first choice was the holder from E3D_ (…
Made this for my sister. She loves every color, but it has to be black ;-) Therefore I printed it in Prusament Galaxy Black, Ziro Diamond Black and some Prusament Galaxy Silver. For the flame I used transparent blue PETG. Each part is…
Just a simple shopping cart token / Einkaufswagenchip. A heart to give away or for your wallet.
My daughter bought an Air Up water bottle. This was supplied with six fruit aroma cartridges (called Pods). The Pods are originally packed in airtight plastic packaging. However, my daughter wanted to try out all the flavors and unpacked…
With this toast press or sandwich engraver (does it have a common name?) you can make your meal a little more interesting. Simply press the motifs onto the sandwich/toast before toasting it and create a height difference that causes the…
A colleague at work asked me to print a Pokeball for his children that could be thrown on the floor without breaking. I found various Pokeballs here on Printables, but none that met the requirements. They were either balls with an opening…
If you want to print larger and need a stand for your garbage bag (e.g. for PET bottles or - in Germany - for the usual "yellow bags"), this can be your next project. The stand consist of a base part, an upper frame, a holder that keeps…
This is the Halloween edition of my toast press / sandwich engraver (see https://www.printables.com/model/1039918-toast-press-sandwich-engraver ). Engrave your sandwiches and toast it with a little more heat to get the best results.
This is a model that I designed for my little daughter. She was invited to a housewarming party for a playhouse and needed a gift. It is a tradition to give a salt shaker to the new house. So I thought a Smarties dispenser in the shape of…
This was the fourth of my enhancements/addons that I created for the Original Prusa Enclosure half a year ago (see my other models here on Printables). It is a three-parts bracket (two models) that fits the mounting holes of an Eviciv 7…
Base part of the stand in various lengths. The 14 or 28 mm wide holders are simply clicked on and can be positioned at the required distances. Labels with usual and special vitamin or mineral names are inserted into the holders and can be…
These clips for motorcycle boots reduce the risk of accidents. They are attached simply by clipping them onto the laces, where they are held securely and feature a tab under which the laces can be fixed. With various designs (currently…
I wanted a holder for my Bambu Scraper that would allow me to hang it up securely instead of having to awkwardly stick it in and constantly touching the holder with the blade. That's why I designed this new holder for my Honeycomb Storage…
These are all currently available results.
