P
PrintablesAlex Henstra
Wall mount for TP-Link BE65 and BE63
Easy to print with no supports. 1 screw needed to attach the 2 pieces together
- Downloads
- 247
- Likes
- 16
- Rating
- 5
All models
Counting matching models…
P
PrintablesAlex Henstra
TCS34725 Colour sensor housing
Housing for a TCS34725 colour sensor with connectors for the I2C connection to Arduino…
- Downloads
- 167
- Likes
- 6
- Rating
- 0
P
PrintablesAlex Henstra
LED matrix 64x64 P3
Case for LED matrix 64x64 P3 and ESP8266 (Lolin v3) Print Settings Printer: Custom CoreXY Rafts: No Supports: No Resolution: 0.2 Infill: 25% Filament: Jupiter PLA Clear Category: DIY
- Downloads
- 72
- Likes
- 0
- Rating
- 0
P
PrintablesAlex Henstra
E3D V6 Hotend 30mm cooler with BL-touch
This is a E3D V6 clone mount for my CTC I3 Pro B printer. I use this with a Bowden type extruder. The mount is attached to the original X axis carriage. Print Settings Printer: CTC I3 Rafts: No Supports: No Resolution: .2 Infill: 30%…
- Downloads
- 53
- Likes
- 6
- Rating
- 0
P
PrintablesAlex Henstra
Dog Ball Chute
I printed it with 0.2 mm layers (PLA) and the large opening on the build plate. Sliced it with Prusa Slicer and chose tree support (support on build plate only). The print took about 23 hours. Feel free to improve the design:…
- Downloads
- 25
- Likes
- 8
- Rating
- 4
P
PrintablesAlex Henstra
Snappy Checklist
All part can be printed without supports and without color change mid print. You only need red,green and another color filament. tolerances are critical for a smooth snappy operation of the checkmark switch. No glue or screws are needed,…
- Downloads
- 23
- Likes
- 9
- Rating
- 0
P
PrintablesAlex Henstra
Z motor mount for CTC I3 Pro B
Improved mount for the Z axis motors on my CTC I3 printer. You can use a M8 rod to connect these mounts with the M10 Y-Axis rods. The Motormount STL file is for both left and right motors. Use M10 Nuts and big washers to get a really…
- Downloads
- 19
- Likes
- 2
- Rating
- 0
P
PrintablesAlex Henstra
Boxturtle Spooler Unibody Wheel
The wheel can be printed with any material and the tire must be printed in TPU or other flexibel filament. I used TPU 95A. 0.2 layers and 20% infill is more than enough for the wheel. The tire is best printed with a random seam and "Avoid…
- Downloads
- 17
- Likes
- 4
- Rating
- 0
P
PrintablesAlex Henstra
Tesla Model Y wireless charging adapter for Motorola Razr 60 Ultra
The Razr 60 Ultra does not allign with the wireless charging pad in the Tesla. This model raises the Razr just enough. Print with PETG, ABS or any other filament that can handle the heat in a car parked in the sun.
- Downloads
- 17
- Likes
- 1
- Rating
- 0
P
PrintablesAlex Henstra
Doodle Booster Wallmount
The mount on the booster uses the existing screws
- Downloads
- 15
- Likes
- 2
- Rating
- 0
P
PrintablesAlex Henstra
Stealthburner mount for HEVO
Remixed my own parts for mounting a Stealthburner to my HEVO. This replaces the original X-carriage on the two 8mm rods. There are no endstops on this, i am using sensorless homing. There are a lot of brass heat inserts needed. The…
- Downloads
- 14
- Likes
- 1
- Rating
- 0
P
PrintablesAlex Henstra
Mount for Xikestor 3200-5E1X
The default mounting method renders the indicator LEDs useless because they end up between the wall and the cables. This mount lets you use the same screws while positioning the switch so the LEDs face forward. I printed the mount with…
- Downloads
- 14
- Likes
- 1
- Rating
- 0
P
PrintablesAlex Henstra
Raspberry Pi Zero W case for OctoPi
This is a case for a Raspberry Pi Zero W with Camera. The camera module is a cheap chinese clone with the long flatcable. I tried to use as few metal screws as possible. Everything is printable except the USB connector and the screws for…
- Downloads
- 14
- Likes
- 1
- Rating
- 0
P
PrintablesAlex Henstra
Verstegen spice organizer
Hang your spice under a shelf. Easy to print without supports
- Downloads
- 9
- Likes
- 0
- Rating
- 0
P
PrintablesAlex Henstra
Air Quality Wall Plug
This is a case for a pms5003 sensor and all the necessary parts to make in functional. I tried to make it modular so you kan modify a part of the case for your own components. components used: heltec_wifi_lora_32 am2301 temp/humidity…
- Downloads
- 8
- Likes
- 2
- Rating
- 0
P
PrintablesAlex Henstra
Boxturtle Turteneck JST mod 3030 mount
I use this model for mounting the TN to my printer 3030 frame. It is designed for the TN jst mod and uses a M5x10mm BHCS screw and a hammer T-nut. Printed with PETG and 0.2 mm layers and 20% giroid infill.
- Downloads
- 6
- Likes
- 0
- Rating
- 0
P
PrintablesAlex Henstra
Powerswitch housing for Arduino car
Simple housing for a cheap sliding powerswitch Category: Robotics
- Downloads
- 6
- Likes
- 0
- Rating
- 0
P
PrintablesAlex Henstra
Clamp for securing a PUG to a 3030 frame
You may need to add supports for the base. The base needs m3 heatinserts and the clamp is then attached with 2 m3 screws This is made for the cutout of the pug_v4_l_75mm.stl This model was made in Onshape…
- Downloads
- 3
- Likes
- 0
- Rating
- 0
P
PrintablesAlex Henstra
3030 frame Filamatrix Depressor
The original depressor for Filamatrix are base on Voron 2020 frames. This one is for the 3030 HEVO frame. 3 heat inserts must be used in the model. 2 in the base for the 2 3x6mm SHCS and 1 for holding the 3x20 mm BHCS screw The base is…
- Downloads
- 3
- Likes
- 1
- Rating
- 0
P
PrintablesAlex Henstra
3030 Nozzle Brush
I used this on my HEVO with StealthBurner hotend. I lowered the top-front 3030 extrusion to hold the brush and allow for more travel room with the StealthBurner. The model is printed in parts with no supports needed. There are 4…
- Downloads
- 3
- Likes
- 1
- Rating
- 0
These are all currently available results.