Counting matching models…
WARNING: NOT FOR ELITE 2 / C64 Ultimate The updated version for Elite II and C64U can be found here: https://www.printables.com/model/1567413-c64-ultimate-elite-2-user-port-combo-adapter-2026 The 2026 update of the one that plugs onto the…
This is the 2026 update of my enclosure design for the Ultimate series (C6U/Ultimate Elite 2) User Port expansion. (Black or White PCB) I also took the opportunity to redesign the mounting mechanism. The previous version could come loose…
WARNING: NOT FOR ELITE 2 / C64 Ultimate This design is meant for the original User port adapter (green PCB) for the Utimate 64. You can find the updated version for the C64U and Ultimate Elite II, here:…
This is the 2026 update of my Enclosure design for the Ultimate series (C6U/ Ultimate Elite 2) User port expansion. (Black or White PCB) It attaches directly to the Tape port for a nice clean look. I would very much like to thank @FrankWL…
7-3-26 : Due to changes in the menu structure of the newer Firmware version(s), There's a possibility that some macros point to the wrong function. You can, however, easily edit your own macro's via the Vial editor. The MacroCart is…
This bracket uses the circuit board from a generic USB 2.0 to SATA adapter and turns it into a nice and tidy solution for mounting your SSD inside a C64 Breadbin case. The SSD Sled allows you to quickly remove the SSD from the case and…
Big push-button that fits most regular soap dispensers and allows you to use them handsfree. I wanted to design a push-button that is easily adaptable to fit on all different kinds of regularly available soap dispensers, and allows you to…
Print Settings: Layer height: 0.2 mm Perimeters: 2 Support: Not Needed Material: PETG* * I used PETG for this because of the extra flex. Haven't tested this model in PLA.
This is somewhat of a proof of concept, because I don't know if this will work with every C64 enclosure. It relies on a tiny gap between the metal expansion port cover and the enclosure. I've included a test model that you can print to…
Print Settings: Layer height: 0.2 mm Perimeters: 3 Infill: 15% Support: Only some support on the front of the ‘cover’ for the hinge pin. The base enclosure requires some support on the front to prevent sagging. Additional hardware…
Replacement button to release the Joycon from the console. Print Settings: Layer height: 0.1 mm Perimeters: 2 Infill: 15% Support: No support needed, No brim
A while ago I experienced a leak in a heating pipe at a hard to reach location. I designed this model to catch the dripping water and guide it safely into a container. Diameter = 15 mm Attach with tape Print Settings: Layer height: 0.2 mm…
This mod adds 3 push buttons to my User port enclosure that you can connect to the internal button header of the C64U / Elite II WARNING: The tolerances on this design are extremely tight, so depending on your printer calibration, you may…
These are all currently available results.
