Counting matching models…
This is a simple Z-Seam test. Just print with starting point next to X= 0 and Y = 0. So the Z-Seam will be in the middle of the arc and you can play with the settings. Print Settings Printer: Hypercube Evolution Rafts: No Supports: No…
Tried to build my own "Berd-Air"-style tube. As there are no tube bender available on thingiverse that allowing to bend a 360°- circle, I had to design my own. The procedure of bending is quiet simple: 1.Things you need: aluminium tube…
As I wanted to mount my Sonos Port to the wall to hide it behind the tv shelf, I designed a wall mount. Links: Sonos Port:…
As shallower spools tend to slip of the bearings, I decided to redraw chanders Spool Holder and add a third bearing. So even smaller spools stay in place. The pin holds the bearings in place. I used these bearings, they work well…
This is a remix for the Hypercube Evolution I created to fit Ballscrews for the Z-Axis. Z- Axis: I trimmed the Z-Carriage a little to give more space on the upper extrusions. I also redesigned the top Z-Brackets to use countersunk screws.…
This is a Remix of Spannerhands Spool Mount. I added a third window to get a better view of te filament. I also added a "tray-part" to hold Silical gel. (You can check the indicator gel by 2 extra windows). To assemble everything I used…
This is a Case to mount the PanelDue 7i by Duet3D on a 3030 Extrusion. It is angled at 25° to give the best view when mounted. All buttons are accesible (reset; erase). The reset-button is easy to press and for the erase button, you will…
As I needed a 5 V- source to power some servos ( https://www.thingiverse.com/thing:3181212 ) I created a housing to fit a buck converter. I used these converters, they work well!…
This is a Case to mount the PanelDue 5i by Duet3D on a 2040 Extrusion. It is angled to give the best view when mounted. All buttons are accesible (reset; erase). The reset-button is easy to press and for the erase button, you will need a…
As the Berd-Air pump is quiet loud, I decided to design a silencer. The silencer uses 3 principles: Decoupling of the pump and soundproof casing Sound attenuation of the air inlet Sound attenuation of the exiting air flow Decoupling and…
As there is no chargin cradle available to charge the battery of an LEDLENSER H7R.2, iH7R or CRI battery, I built my own. This one can be handled with every li-ion chager. edit 04.05.2020: I added a "storage box" to prevent leakage…
This is a solution to mount the stepper motors on the back of the HEVO. There are 2 motor mounts (big and small) so they will fit for the upper (small) and lower (big) belt. Both mounts use the Bottom plate to fix everything in place. At…
Update V2: As asked, I added another version of the Case to fit the mounting screws of an MKS_Gen L board. (couldn't test it as I don't own one...) Update V2: Now added the Cover for the Mosfets. Hope everything fits well. If not, let me…
This is a case to mount the DuetWifi on an 2040 extrusion. I designed 2 cases: As I need 2 Mosfets one is for the Mosfets to be mounted at the bottom the other one is for the DuetWifi. If you need only an enclosure for the DuetWifi, you…
On a cartesian printer with 2 independent leadscrews for z, it happens, that the X- axis tilts a little and this induces z-wobbling artifacts. The Heatbeds are often mounted on springs / silicone pads etc. to get the opportunity to level…
I designed these LED Mounts for my AM8-Mod. As LEDs I used these:…
This is a X-Carriage for MGN12H- Linear Rails to mount a Nimble and a BLTouch. I included a Shim to adjust the trigger height on the BLTouch depending on the heatbreak that is used. Support is only needed on the BLTouch mount. Everything…
This is a re-designed gimbal mount for the Zesty Nimble. As the original mount by slonolod was designed to mount on a delta printer, I had to re-design the parts to fit on a 3030 aluminium extrusion frame of my Hypercube evolution. I…
These are all currently available results.
