Counting matching models…
This practical cotton swab holder features a screw-on lid, making it suitable for travel; it can also be made waterproof by inserting a gasket into the threading. Printing Instructions: material: PLA temperature bed 60°C temperature…
This is an easy-to-print Halloween pumpkin model. It features a hole at the bottom, primarily to make support removal easier, but also to allow a small led light to be inserted inside; the pumpkin can also be scaled up in your slicer to…
Mini chess with chessboard, print with pla or petg and let's have fun. The best thing is to print separatley pieces with different colours.
gadgets of the famous game Minecraft, you can print with pla and you can colour them with the real colour. This set includes a sword, pickaxe, axe, and shovel. Print with pla.
You can print this model scaling it as you prefeir, I printed it with pla but you can use literally all materials for this project. This is an extreme accurate reproduction of manhattan.
This is a fidget bearing made with duoble helical gear, this system has a tollerance of 0.3 mm, the ring has 36 teeth while the planets and the sun have 12 teeth, there are 4 planets, the angle of inclination of teeth is 30°, the module…
I made theese Easter eggs with Blender, they are really nice and most impuortant you'll need only 30 minutes to print one of these eggs (in the slicer you need to scale the model to 800%). Theese eggs are not really big but they help you…
I made this bunny with Fusion 360, I think it is really nice to decor your house for Easter, it is minimal, and you need only 1 hour to print it. You'll not need to scale it in the slicer, dimension are perfect. PRINT SETTINGS speed…
I made this model on Fusion 360, it works good for your house. You will have to print this shoehorn with petg, with pla you could risk to brake it. You will have to use supports to print this, print it with the longest part facing the…
Use these shoe stands to dry, ventilate, or simply store your shoes. I recommend printing them in PETG with a 15-25% infill, a nozzle temperature of 250°C, and a print bed at 90°C. Always consult the filament manufacturer's instructions…
I made this model with fusion 360 and I printed it with TPU 95A, the prusament TPU is very good but I used Sunlu tpu that's not bad too, I remember you that you need a direct drive printer to print TPU. I printed it at 40mm/s, nozzle at…
stampa il modello con pla o petg e riordnia finalmente la tua scrivania, questo portapenne ha uno spazio per tutto, righello, penne, matite, bianchetto, gomme, calibro, forbici, calcolatrice, qualsiasi cosa.
A little low poly Rabbit for Easter, why not? I love the low poly technique, it is so cool. And I tried to make a model with low poly system. It is the fors for me so I hope there are not any mistakes but I can say I printed it without…
This is a model of a haunted house; the house is enriched with various details, such as well-crafted windows, pumpkins and tombstones in the garden, and roof tiles. The front door is finely detailed, as are the steps leading up to the…
This support promotes ventilation during extended use and was designed to obstruct the fans as little as possible. Its dovetail joints give it structural strength even with a 5% print infill. The support holds a maximum weight of 3kg with…
Hi, this is a cable organizer that you can take with you everywhere and you can use that to orgnaize all your cables. Print with PLA at 220°C and 60°C bed temperature. I'm printing a lot of these for my office. it's easy to use and it is…
This is a model of a Minecraft creeper. You can use it as a shavings holder, an ashtray, or as a storage container (the gray color is because I use pencil leads). The lid simply sits on top and covers the circular hole. The creeper's…
christmas tree to decorate your house and the tree
Quick-to-print Halloween ghost model; requires tree supports. Recommended material: PLA; nozzle temperature 220°C, bed temperature 60°C, speed 180 mm/s.
This rubber duck floats on the water, kids friendly, it can be printed with PLA in just 2 hours. settings: bed 60°C nozzle 220°C layer height: 0.3mm
This is a fantastic model of the Monza racetrack that I love to keep close to me while I play F1. This is part of a long collection I'm about to release, which will include all the 2026 racetracks, plus Imola and Portugal. Stay tuned,…
This is a faithful scale reproduction of Mount Everest, created using Open Topography data. As you can see, the model takes up little space and can easily be placed on a table. I'm building an entire shelf to display all the reliefs I…
The stand is compatible with Logitech MX keyboards as well as all other keyboard types; the model features practical anti-slip pads that can be printed in TPU, while the structure—consisting of a rotating disc and a housing for it—is…
These are all currently available results.
