Counting matching models…
To continue on my journey for a fully custom tattoo machine I made a cartridge grip holder to fit any traditional or rotary tattoo machine allowing it to be used with tattoo cartridges. I made a good few grip versions my favourite would…
I tend to do blackwork maybe add a few cups of grey wash. But yesterday I worked on a wee colour piece and managed to spill every one of my cups and had to mix all of them again and again not to mention I hated the cleanup so I thought I…
There are quite a few holders here inspired by print in-progress coaster but they all seemed a bit too clean to me so I made a bit messier one to show off what printing is all about. I couldn't print it myself yet as my printer is missing…
This doorstopper contest came at a perfect time as I was just thinking about making this wee doorstopper to keep my garden door slightly open for ventilation. I have plants on the window that would freeze if I forgot to close it and I…
I draw and tattoo my design and a friend asked if I do it with the machine I made. I thought to myself what a great idea and why not make a tattoo machine from some leftover electronics I have left in my house especially as I wanted one…
There are cartridge holders out there that you can buy for pennies but if you need one and don't have one on hand this might help you out. Obviously, if you tattoo people these should not be ever reused and I guess they should be…
The least complex tealight holder I have made so far. Plain minimalist and designed to fit in any modern environment while being practical having grooves for wax overspill if made from suitable material and with a hole on the bottom for…
I designed this vice specifically for my little CNC as I needed something low profile and I don't like using clamps. Plus this lets me hold down not just flat materials in a number of ways. those flat soft jaws inserts allow anyone to…
The V2 version of my upcycled tattoo machine is a bit lower than the last one for better weight distribution bit thicker around the tube as I had a few of them break before when I overtightened the screw I'm not gonna say it's better than…
I saw a tool like this on ebay day before the competition started and thought I could use that stand added it to my wishlist thinking of buying it at some point and then this competition showed up and I though why not to make it myself. I…
I made this a while ago and have second version that had inproved pin so it would be easier to print but I can't find it now. I used to make knives back in the day and kinda miss it and I don't have the space and tools to make steel ones…
The toothpaste squeezer that is shaped like a pickle rick for Rick and Morty fans out there. And if you don't have a wall mounted toothpaste holder feel free to look at mine: https://www.printables.com/model/1055583-toothpaste-holder
Simple tool holder for both 125 and 150mm random orbital sanders. It can be used to attach to a workbench either using a quick release slide on mount or another version that is screwed in for a more permanent attachment. Screw on version…
Just a little lucky horse shoe home decoration to be hang up on the wall to catch the luck or just to look nice. Holes are 75mm part and it comes with a guide if you do not have ruler handy. Or you can just use double sided tape or no…
I love the space-saving nature and accessibility of the original design I just had to add a base to it to make it a little bit more useful for pencils I use.
I made this as I was in need of a dust extractor for my carbon fibre endeavour although it seems that I will end up making an extraction table or some sort of cyclone separator adjustment as it works now although its filter gets clogged…
I made this basic more ergonomic inhaler topper fit on most commonly used inhalers used in the UK. It is more rounded and slanted unlike the other ones I have seen which in my opinion helps with ease of use as the thumb is not exactly the…
I just watched Hannibal recently and really liked his recipe organizer so when this contest popped up I knew what I am gonna do. I went for an industrial look from the turn of the century the one before last if that is not clear. I wanted…
A paper towel holder that can be mounted with double-sided tape or “No More Nails” glue under the cabinet or onto the wall to have paper towels on hand. Acrylic double-sided tape https://s.click.aliexpress.com/e/_oD3RTVW
One of several tealights I designed while I was at College and then worked on bit more as I do like candles and experimenting with new materials which is why I even casted them in concrete and resin. I aimed to make them simple and…
There are cartridge holders out there that you can buy for pennies but if you need one and don't have one on hand this might help you out. This version is vertical and I use it to keep my cartridges safe when practicing or using it them…
I made this one to upcycle an old CD drive, specifically the main motor from it. Most upcycled motors from shavers and similar devices run on lower voltages, which is not ideal for battery-powered machines. This one in the pictures is…
On my quest to maximalize my work space and put everything on walls this time it is holder for my chopping boards by JosephJoseph just the boards wall mount is all my design. I think it would fit normal wooden boards as well but depends…
I was looking for a pot to split and replant my monstera and there are lots of decorative plant pots to choose from but not a planter that would make sure my plants will stay hydrated and get some air going through the soil. I feel like…
To start off, it is not quite ratcheting, but it does click to provide some friction and stop it from unwinding, so that was a bit of a clickbait. I tried loads of cable organisers just look at my makes you will see half of them there are…
I liked the design these are based on and used them before as wall mounted as I just stuck them on the wall with No-more-nails for quite a while. Still, they were getting a bit old and hard to wash being mounted on a wall so I made these…
I never found the perfect solution to keep sanding discs on hand so I tried to design my own. Quick to take off so you can keep the mount on and get more mounts on the wall or something and just take it to the workbench when you need it.…
As promised a bigger version of my table drink, cup, pencil stand or whatever holder. I am slowly but surely moving everything off my desk and I found most cup holders out here unnecessarily deep or complex so I made this one.
Probably my favourite tealight. Designed to look like a flame and when you look at it from the bottom you can even see tealight in there. I probably made like 50 iterations of this one from card ones over blue foam models to resin and…
I wanted to make this for a while and Valentine competitions finally made me do it. Thinking about it, a broken heart might be the opposite of Valentines but at the same time is it Love if it doesn't hurt? I used a little double-sided…
I got this little table saw as I saw some potential in it to make it into a diamond disc sander and as I was fairly happy with its power and most importantly how quiet it is that I didn't just gut it open but made a little table for…
I was going to make a marble run but when I finally got time to sit down to it I noticed that there were already half a dozen of them out there so I thought how about a little classic that was the first game I have ever played on Windows…
I got an IKEA DAKSJUS mid-century bamboo plant stand and thought let's design a tray for it and then I thought let's make a planter for it as well and then I ended up redoing the whole thing just a bit smaller in terms of the width for…
I was asked to make a kydex like printable sheet for my karambit. You can print it with fuzzy skin for a bit of a texture and it has a built in support so it can be printed standing up and then you can relatively easily break it off. I…
I wanted to mount an extension cord to the back of my table to add to various cup holders I have back there and as I could not find one I made one. Printed in PETG, .6 nozzle, 2 perimeters, like 15 per cent infill and it feels as sturdy…
Wanted to design something and thought about what I like and I straight up thought coffee and plants so I made a little Moka pot inspired planter to fit on my window sill in the kitchen. It is quite tall so I am not sure what sort of…
I was asked to do another version for a 3" sanding tool and sanding discs and needing one myself I was happy to do it. Works either for a wall or with a Festool table.
I needed a coat hanger and noticed quite a few of them in my wardrobe were occupied with stuff that doesn't need to be on one so I went looking for a hook over here but I couldn't find one here so I made one but there needs to be a few…
I was tidying up the kitchen and noticed how many utensils I had kicking about the drawers that I hardly use so I thought I would get utensils to stand but didn't want to waste space on the counter so I quickly designed and printed this…
Was looking for a bracket to mount this shelf that wasn't a shelf before and couldn't find one so I made one. They printed with 0.6mm nozzle 2 perimeters and like 25% infill. new filament and the wrong printer resulted in a bit of…
I never really use any diamond paste as it all sits in a bag but today I was polishing something up and thought to myself let's see how these work. I quite liked them so I decided to make a wee stand for them so I can actually see them…
I had this little Polishing Machine but felt a bit flimsy and I wanted to make some attachments to it so I went ahead and rebuild it's enclosure and added a two way switch to spin it either way. All you need to build it is polisher itself…
I wanted to finally mount my projector on the ceiling and wasn't keen on all the mounts out there. First of all I wanted to drop it down a bit so I don't have to skew the screen as much. Hence I made it adjustable with a simple pin to…
The holocene extinction memorial was designed for Edinburgh Zoo to bring attention to the issue of deforestation and the mass extinction of animals caused by humans. It unfortunately never got made in full scale due to some unforeseen…
I finally replaced the board on my Cetus for the mellow fly board so I could add an extra part cooling fan and when looking for a new 24v fan I found some Ender 3 set of two fans and thought why not so I made a mount for this little fan I…
I replaced the motherboard on my Cetus with a MellowFly board and I can't quite get the same print quality as I had before so I am slowly but surely replacing everything to find the issue. I used two skateboard bearings on an 8mm carbon…
There is bunch of table mounted bins out here but to me most seem either overcomplicated or a bit fragile so I made my own version opening around 200x100mm. The mounts need to be attached to the desk with screws but the frame itself can…
I liked this cheap caulking gun, but I did not like that handle or guess it is more of a pusher, which wasn't curved enough to use as a hook. I like to hang all my tools up, so I made my own handle. Original handle screws on with an M5…
I bought this ultrasonic cutter out of curiosity and to use on one specific project and found it quite useful that I thought I would make a stand to keep it always handy. https://s.click.aliexpress.com/e/_c3tP0u3N I used the screw in one…
If you have bought an Anet A8 or any laser cutter in the late 2010s, you probably got one of these infamous yellow reversible screwdrivers. I didn't even know it was reversible for the longest time and kinda forgot about it till I…
I saw this little screwdriver in Lidl and I just broke the best precision screwdriver out there aka CreationSpace CS0702A so I thought I might give this one a chance. I didn't realized it was battery powered and honestly it is nowhere…
I made a little organizer for my polishing paste and few felt/wool polishing discs tha ti use with it specifically 3 2-inch ones and another 3 3-inch ones and with space for a little jar that I use for a burnishing compound. #Maybe…
There is a lot that I do not like about BambuLabs but I do like these nozzle cleaners they use so I bought a few on aliexpress they do come in pack of three with double sided tape on the back and as my printers use the entire space for…
I made this little holder to clean up my desk and move even more stuff away from my desk. There are two versions on here, one that I used, the first is glued to the desk using no more nails and secured using one self-tapping screw, and…
I keep most my cans in a box but there is a few including spray adhesive and primer that I use regularly so I started looking for some wall mount solutions but nothing really caught my eye or used too much filament so I overdesigned and…
I made this simple two piece print that simply slots together to create a brush stand. If its too loose a bit of glue should keep it together but way it printed for me it was perfect snug press fit.
I love these little bins and have a good few of them around. I am clumsy though and keep on kicking them over by accident so I decided to give up stack ability as I almost never stack them anyways and made a little base for them. Two…
I do love this microfiber cleaner by K-Studio.ca for build plate but ended up using it for my monitors instead and as I am constantly trying to declutter my desk so I decided to take cap off my monitor mount and make a little holder for…
I decided to go back to simpler times and use a traditional badger hair brush for shaving. The last shaving soap bar I bought came without a container, so I designed and printed a small holder for it. I made a ventilated lid with plenty…
I designed this concept a long, long time ago, before 3D printers were a thing, and finally made a printable model of the design for this back-to-school competition. It is a minimalist pencil case that also serves as a holder. I wanted…
These are all currently available results.
