Counting matching models…
This is a model I've been working on for a while of Bender, a robot, from Futurama, a show by Matt Groening. I designed this in Autodesk Fusion360, assembled in Autodesk Inventor, and resized in Ultimaker Cura. I used a screenshot taken…
Hi all, here is my first vase to be produced in quarantine. I'm an absolute fan of this vase. Printed at 0.08mm layer height and I think it has an exceptional soft appearance and looks great in the light. Thank you for printing!
Hi all! Was digging through a few old files and I had some vases I designed a while ago sitting in a folder that I had not shared. I love this file, I printed it out and put it on show as a centerpiece. I love this model Picture Credits:…
Its a curvy vase which I think looks pretty neat. Designed to be printed in Vase mode (or spiralize outer contours). I personally love vases and I think this is a great one which looks improbable to do by hand. I've included a link to a…
This is a model of Clamps, a character on Futurama and a member of the Robot Mafia. I designed Clamps in Autodesk Fusion 360, which has started to become my preferred design software over Autodesk Inventor. As with all my Futurama robots,…
Hi all, here is a model of Preacherbot, a fairly prominent supporting character, in Matt Groening's Futurama. Hope you enjoy! Fandom links: https://theinfosphere.org/Reverend_Lionel_Preacherbot…
Hi all, this is a captive nut toy I designed a little while ago to demonstrate the unique advantages of additive manufacturing (it's also a fun desk toy). The file included has built in supports so I'd recommend turning support material…
Hi all, here is a freestanding filament spool holder with an adjustable oiler arm. I wanted to make this as universal and applicable as possible with as many set ups as I could while keeping supports and printing material down. I'd print…
Here is a quick model I drew up of the sport utility robot as seen in Futurama episode "Crimes of the Hot". Professor Farnsworth created this robot while working for Mom. What made this one special is that it ran on alcohol, though it…
Hi all, this vase I have for you today was designed to trick the 3D printer overhang potential a little bit. The lines on the side are overhanging more than 50 degrees or so and while they would normally require support material, they are…
This is a little hexagonal spiral vase I designed to be printed in vase mode. I think it looks pretty neat. Picture Credits: Briella Henderson--…
Hi, here is a new vase I designed. I think it looks absolutely stellar, but due to the color of the vase, the picture didn't pick up as much detail. It's a great vase, one of the best ones that I have designed. Thank you for printing!
Hi all! Like with my other recent post, I was digging through some old files and found this vase which I realized I had not uploaded yet. I printed this vase in a gold from CC3D which I love the shimmer and the shine on it. I've heard…
Hi all, this is a vase I made to look similar to, or at least evoke, a Quartz crystal. What really make this vase interesting to me is that it manipulates the FDM process to produce effects. At 0.24mm and higher, the top layers of the…
Hi all, here is one of my favorite Futurama Characters, the Killbots who are gloriously incompetent and consistently funny. I designed this in Autodesk fusion 360 looking off a photo of the Mom Co. Killbots. You're going to have plenty of…
This is a model of Fender from Futurama episode "Hell is other robots" where Bender becomes addicted to electricity after his high school friend Fender introduces him to it at a Beastie Boys concert. He appears in other episodes, though…
This is a little vase I designed in fusion 360 with the goal of creating something inspired by a gear, but functional and different from the classic vase shape. I think that this vase looks better with a 0.36mm layer height so that is…
This is a curvy vase I designed to be printed in vase mode or spiralize outer contours. I think it looks fun and will print well. Its a cool little design I think. I designed the in Fusion 360 as a continuation of the other vases I have…
This is a Cthulhu-inspired Bender head I designed. It actually is incredibly printable (probably around 0.1-0.15 mm would be best) and I think its just so ridiculous and goes so well with my octopus bender (the body of which I have…
Hi all! This is a columned vase I designed in Fusion 360. I liked the idea of a vase that is supported by itself. I think it is pretty neat. I tested this in spiralize outer contours in Ultimaker Cura and it sliced pretty well. Thank you!…
Hi, I've been using user swedishvaperuk's e3d v6 effector ( https://www.thingiverse.com/thing:2767236 ) on my Anycubic Kossel linear plus for the past year and absolutely love it! However, I wanted to re-vist the part cooling situation…
Hi all, this is a 3D printed version of an extremely impressive machinist's trick where a bolt is given both left and right handed threads which enables two nuts (one RH one LH) to ride on it concurrently. Idea being that one motion (in…
This is the energy baton from Futurama. It is a lightsaber-like weapon, although it doesn't cut: it is a blunt object. URL (who I've a model of and will post in the future) and Smitty use them as their primary weapons to stop crime. I…
Hi all, this vase I have for you today was designed to play more with the idea of a 3D printed vase that actually had weight and presence to it, more so than a typical vase mode print like some of my older stuff. I also really enjoyed the…
Hi all, here is a model of Humor Bot 5.0 from Futurama. Big thanks to Peter Avanzino for providing the drawings that I used to make this model. Thank you so much for printing! Fandom link: https://futurama.fandom.com/wiki/Humorbot_5.0
Hi all! I had an art opening at my school, showing my vases and a few of my Futurama replicas, as well as a few models I've painted (namely a Triceratops Skull Scan and that Deathtrooper head that was popular a few months ago). People at…
This is a model of Robot 1-X from Futurama I drew up. He's one of my favorite supporting characters. I think hes just so funny. Thank you! Picture Credits: Briella Henderson--…
Hi all, this vase I have for you today was designed to have an internal wall. I think its a kinda fun idea and this is more an experiment than anything else. It prints great and has a real fun tangible feeling in your hands. Its one hell…
This is a vase I designed influenced by hexagons and triangles. It doesn't show up too much, but I took those basic shapes and tried to modify them in such a way where when combined there is such a wavy appearance which I love, but at the…
Here is a spiraled idea of that mineral-esque vase I did a while back. I've been designing these with overhangs that should be easily printable at 0.04 or 0.08mm layer heights, but at 0.2, .24 mm layer heights, the top extrusion on those…
Hi all! This is an amphora I designed based on repetitions of fours. I like this vase as a continuation of my amphora series and the idea that faces can be repeated, rotated, but with the same numerical base. I designed this in Fusion…
Hi all! This is an amphora I designed based on 6 revolutions. I really love the drastic curves and almost spiral up the body. Thank you! Print instructions Category: Sculptures
This is a modification of my square vase which I think is more interesting and a lot more fun to watch print. I'd suggest scaling the Z axis ununiformly to 120%, but its really up to you. Thank you!! Picture Credits: Briella Henderson--…
This is URL (Pronounce Earl), a robotic police officer who showed up in a whole bunch of futurama episodes, with his first appearance in Space Pilot 3000, the pilot of Futurama, when he tried to arrest Fry for refusing to get his career…
Hi all! I made an Amphora based of 3s and there are repetitions of either 3, 6, or 9. I'd recommend printing with a large brim, maybe 5mm. I think this is a pretty design and will print well. Thank you for downloading! Print instructions…
Hi all, here is a little bust of Craterface. This was my first time 3D sculpting in meshmixer and it might be a bit rough around the edges, but I think it turned out alright. Thank you for printing! Recommended layer height: 0.08mm Wiki…
These are all currently available results.
![Flowery Vase [Beautiful!!]](https://media.printables.com/media/prints/15579/images/146737_ba94d0c5-09be-4736-b88e-6fb1b9ac2719/50529048_542080042935381_1193977212953427968_n_15.jpg)
![Clamps (aka Francis X. Clampazzo) [Futurama]](https://media.printables.com/media/prints/15563/images/146638_65b4b6f6-049c-4326-802f-9e9f5ffb3d2d/51253919_2329637450651060_4606990257668227072_n_1.jpg)
![Preacherbot [Futurama]](https://media.printables.com/media/prints/26648/images/267107_db69977c-b825-4941-abd1-6d32459973d5/preacherbot.png)
![Sport Utility Robot [Futurama]](https://media.printables.com/media/prints/16429/images/156498_00470bad-f856-4b4e-9703-730c1cd9c343/firstmodernrobot.jpg)
![Mom Co. Killbot [Futurama]](https://media.printables.com/media/prints/15582/images/158501_cf60961b-d1d6-4db8-a2d5-bad3222b4c63/futurama-killbot.jpg)
![Humor Bot 5.0 [Futurama]](https://media.printables.com/media/prints/47194/images/470323_bfe72f47-f4a5-4439-bf7f-b8ff25493d0a/humorbot50.jpg)
