P
PrintablesChris
Larger gravity broom holder
This remix of the model by LoboCNC lengthens the depth and width of the holder (and also the gear) by 0.5in to accommodate tools with larger handle diameters.
- Downloads
- 1,333
- Likes
- 169
- Rating
- 4.93
All models
Counting matching models…
P
PrintablesChris
Gaggia Classic Pro Portafilter Hanger with Clip (magnetic)
This is a remix of the portafilter holder designed by teky929rr for the Gaggia Classic Pro espresso machine (base model found on Thingiverse ). The original design has been changed to be more stable, and includes a wider top clip and a…
- Downloads
- 978
- Likes
- 152
- Rating
- 4.71
P
PrintablesChris
US downspout to garden hose adapter (for diversion to rain barrel, etc.)
This remix allows diversion of water from a gutter downspout (common US 2in x 3in size) to a garden hose (3/4in GHT hose fitting). Great for channeling water in a different direction, to a rain collection barrel, or a garden. It maintains…
- Downloads
- 510
- Likes
- 78
- Rating
- 5
P
PrintablesChris
Peloton shoe hanger
This is a bracket and hooks to hang two pairs of shoes off the back of a Peloton exercise bike (model: Bike, not sure if it will fit the Bike+) Full supports helpful for printing. There are three parts: one is a frame that attaches to the…
- Downloads
- 412
- Likes
- 78
- Rating
- 4.86
P
PrintablesChris
Dibbler tool for planting seeds or bulbs
This dibbler is a hand-held garden tool to assist in making shallow holes for planting seeds or bulbs. Depressions on the side mark approx. one-inch increments.
- Downloads
- 279
- Likes
- 50
- Rating
- 0
P
PrintablesChris
Desk clamp for ring light post
This is a fully 3D-printable clamp to attach a ring light with a ~1in diameter post to a desk.
- Downloads
- 226
- Likes
- 31
- Rating
- 5
P
PrintablesChris
Pipe support clamp for 3/4in type L copper and 3/8in threaded rod
Pipe support clamp for 3/4in nominal type L copper pipe with a pocket to hold 3/8in-16tpi nut to allow attachment to threaded rod and wall support. Prints best with the “pipe axis” orthogonal to the build plate, with supports enforced for…
- Downloads
- 179
- Likes
- 35
- Rating
- 0
P
PrintablesChris
Rubbermaid twin track mounting bracket
Bracket to attach to Rubbermaid Twin Track rails. Holds 3mm hex nuts and allows for M3 screw. Print upside-down, no supports needed. This can also be merged with other models to allow them to be attached to Twin Track rails.
- Downloads
- 167
- Likes
- 35
- Rating
- 0
P
PrintablesChris
Adjusted/remixed bushing screw for 3D-Printed Yarn Winder model originally by BGDglider
This is a remix of the gear-mounting bolt for the wonderful yarn winder model posted by BGDglider . The original model worked well for me with one exception: each screw that holds the drive and middle gears in place…
- Downloads
- 160
- Likes
- 20
- Rating
- 5
P
PrintablesChris
Raspberry Pi Zero 2 W enclosure case (customizable housing!)
This is a case for the Raspberry Pi Zero 2 W. The design for the case and its lid can be customized to expose or cover the various ports on the Raspberry Pi, and to have internal or external mounting holes. The Raspberry Pi PCB is held in…
- Downloads
- 156
- Likes
- 12
- Rating
- 0
P
PrintablesChris
Ryobi inflator to garden hose adapter, male US GHT (model P738)
This is an attachment for the Ryobi 18-Volt One+ Cordless High Volume Power Inflator (Model P738) to connect a garden hose to the inflator so it can be used to blow out residual water from a hose at the end of the season. To use: place…
- Downloads
- 144
- Likes
- 32
- Rating
- 5
P
PrintablesChris
1 input 5 output watering manifold for drip irrigation; 1/4" input 5/32" outputs
1 input 5 output watering manifold for drip irrigation; 1/4" input 5/32" outputs prints best with barbs facing toward the build plate (& can likely print without supports)
- Downloads
- 132
- Likes
- 18
- Rating
- 0
P
PrintablesChris
Hand pruning shear holder
This is a wall-mount holder for handheld pruning shears. Two holes on the front allow for easier installation of M3 wood screws (and likely also US #6-32 screws).
- Downloads
- 102
- Likes
- 15
- Rating
- 5
P
PrintablesChris
6 in (six inch; 6") magnetic duct (vent) union couplers, with sealing cap and wall connector
This is a set of magnetic couplers to temporarily attach six-inch (6in aka 6") flexible ducting in a way that is easily removable or transferrable between different flow paths. These are suitable for various applications, including: dust…
- Downloads
- 102
- Likes
- 15
- Rating
- 0
P
PrintablesChris
Ten frame magnetic math instructional tool
This is a 3D printable model for a "ten frame", a math instructional tool. It is intended as a physical manipulable device suitable for students or teachers. The markers are held in place with magnets, and auto-center for consistent…
- Downloads
- 91
- Likes
- 16
- Rating
- 0
P
PrintablesChris
Cat food measuring cup 2&3 fl.oz. (58&89ml)
This is a measuring cup for dry cat food. One side holds 3 fluid ounces (88ml), the other holds 2 fluid ounces (59ml). It can be printed upright with a brim but without supports on a printer that can print short bridges. Recommended layer…
- Downloads
- 89
- Likes
- 18
- Rating
- 5
P
PrintablesChris
Cuisinart food processor safety interlock
Use at your own risk. I accept no liability if this is printed and used to bypass safety mechanisms of a Cuisinart DFP-14BCNY 14-Cup Food Processor. Seriously, this is dangerous. Only included here to illustrate the geometry of the safety…
- Downloads
- 81
- Likes
- 6
- Rating
- 5
P
PrintablesChris
Quilt cutting guides for making 2.5 inch fabric squares
Quilt cutting guide for making 2.5 inch fabric squares. (Rescale in x and y as desired for other sizes). Cut/trace outside the guide. Three different versions included: one solid, one just a frame, and one a frame with diagonal alignment…
- Downloads
- 70
- Likes
- 17
- Rating
- 0
P
PrintablesChris
Micropipette holder bench clamp
This is a micropipette holder that can clamp onto a bench top or table surface. The clamp base is intended to receive M3 heat-set inserts, and the pipette holder attachment has holes to affix it to the clamp with M3 socket head screws.…
- Downloads
- 52
- Likes
- 15
- Rating
- 0
P
PrintablesChris
SMA connector thumb nut (dust cover)
This is an finger-turnable protective dust cover nut for SubMiniature version A (SMA) connectors used on various pieces of radio and optical equipment. It was remixed from MikkoP's original model to add an extension allowing it to be…
- Downloads
- 43
- Likes
- 6
- Rating
- 0
P
PrintablesChris
Wall mount for Orvis fly fishing rod hard storage case
Wall mount for an Orvis fly fishing rod hard plastic storage case from the late-90s (for Clearwater series rods, possibly others). During installation, space the top and bottom such that the case can be inserted into the top bracket and…
- Downloads
- 43
- Likes
- 14
- Rating
- 0
P
PrintablesChris
Ironing board feet (for 1in. legs)
Ironing board replacement feet to protect floors from scratches (fits ~1 inch steel tube legs). Prints OK at 0.3mm. Slight scale adjustment may be needed depending on the tolerances with respect to a particular ironing board.
- Downloads
- 27
- Likes
- 1
- Rating
- 0
P
PrintablesChris
A/C drain extender plate for LG air conditioner
Drain extender for LG window air conditioner model #LW6017R (may fit many other makes or models with a rear drain hole). Slices fine at 0.3mm, 2 perimeters, 2 shells, 10% gyroid infill. Print in the same orientation as it will be used.…
- Downloads
- 22
- Likes
- 5
- Rating
- 4.5
P
PrintablesChris
Larger foot for Cedarcraft raised garden bed
This is a larger foot for Cedarcraft raised garden beds (& possibly other brands), designed to fit the aluminum corner extrusions and better spread the weight across a larger area. Channels and a recess are included on the bottom so…
- Downloads
- 14
- Likes
- 3
- Rating
- 0
P
PrintablesChris
Bearing filling cap for Zeller + Gmelin Divinol Grease
This is a cap to pack 8mm linear bearings with grease from a 1kg Zeller + Gmelin Divinol grease tube. It attaches directly to the grease tube, and has outlets inline with each of the four bearing races of common 8mm linear bearings.…
- Downloads
- 13
- Likes
- 2
- Rating
- 4
P
PrintablesChris
A/C drain extender plate for Frigidaire air conditioner
Drain extender for Frigidaire window air conditioner model #FFRE08L3S1 (may fit other models). Slices fine at 0.3mm, 2 perimeters, 2 shells, 10% gyroid infill. Print in the same orientation as it will be used. Needs supports between part…
- Downloads
- 12
- Likes
- 3
- Rating
- 0
P
PrintablesChris
BLF LT1 lantern battery insulator cap / spacer
This insulating spacer cap enables— at least on US airlines, and with TSA/airline acceptance —the lithium battery-powered BLF LT1 lantern to be packed in checked luggage when flying; per 49 CFR 175.10(a)(18) : “ Portable electronic…
- Downloads
- 11
- Likes
- 2
- Rating
- 0
P
PrintablesChris
Prier 400 (Mansfield) Valve Replacement Handle for exterior hose Spigot/Hydrant/Bib
This is a replacement handle for Prier 400 series anti-siphon wall hydrants (AKA "frost-free hose bibs"), a type of exterior hose spigot/bib/hydrant/faucet valve common in the US, and sold at various times under the Prier or Mansfield…
- Downloads
- 10
- Likes
- 5
- Rating
- 5
P
PrintablesChris
LUNOS e2 HRV/MVHR interior cover panel 9/IBE
Interior cover panel replacement for Lunos e2 Heat Recovery Ventilation (HRV) System 9/IBE. This is the cover plate that attaches to the inside wall mounting plate of the HRV. The fit may be more tight than the OEM panel and require a bit…
- Downloads
- 10
- Likes
- 1
- Rating
- 0
P
PrintablesChris
Segway Navimow X4 RTK GNSS (GPS) antenna mounting bracket (for horizontal surface)
This is a baseplate to mount the Segway Navimow X4 (X430, X450) "EFLS" (RTK GNSS/GPS) antenna base station pole/mast to a horizontal surface (with second design for a surface with a 5º tilt ). A machine bolt/screw is used affix the pole…
- Downloads
- 8
- Likes
- 1
- Rating
- 0
P
PrintablesChris
Segway Navimow X4 RTK GNSS (GPS) antenna mounting bracket (for vertical surface)
This is a pair of models to mount the Segway Navimow X4 (X430, X450) "EFLS" (RTK GNSS/GPS) antenna base station pole/mast to a vertical surface (with second design for a surface with a 3.5º outward tilt ). Two mounts: Lower mount: Has a…
- Downloads
- 8
- Likes
- 1
- Rating
- 0
These are all currently available results.