Counting matching models…
This model uses my locking pegboard mount system for 1" standard pegboards. Magnet holes (if present) are designed for 10mm diameter, 3mm thick magnets. “Board Attachment” parts are universal to all models. Print with 3 perimeters and…
Mounting for Voidstar Labs' Gridfinity containers on pegboards without wiggle? Heck yeah! This model uses my locking pegboard mount system for 1" standard pegboards. Magnet holes (if present) are designed for 10mm diameter, 3mm thick…
This tape measure holder (or shallow dish if you prefer to use it for something else) prints without supports (make sure your bridging settings are dialed in!). Uses two board attachments. This model uses my locking pegboard mount system…
This small hook - split into two interlocking parts for optimal orientation and strength - will hold just about anything with a hole in it. Print with plenty of perimeters and use a brim if you really need to (not required). This model…
A pegboard hook for hanging impact-style safety glasses. This model uses my locking pegboard mount system for 1" standard pegboards. Magnet holes (if present) are designed for 10mm diameter, 3mm thick magnets. “Board Attachment” parts are…
A magnetic mount for securely holding Workpro needle nose pliers (or other medium size pliers with a taper). This model uses my locking pegboard mount system for 1" standard pegboards. Magnet holes (if present) are designed for 10mm…
This small curved hook - split into two interlocking parts for optimal orientation and strength - is modified from the original to better hold tools or other large parts above it. The base part is identical to that from the Thin Hook…
A hook with magnet above that connects to pegboards. Should work for many designs of snippers and pliers, but I designed it for Kobalt brand small wire snippers. This model uses my locking pegboard mount system for 1" standard pegboards.…
A magnetic mount for small “yellow” needle nose pliers. This model uses my locking pegboard mount system for 1" standard pegboards. Magnet holes (if present) are designed for 10mm diameter, 3mm thick magnets. “Board Attachment” parts are…
A lightly angled mount made to fit a Kobalt brand folding imperial hex key set. Likely to fit any similarly sized tool. Base of holding area is 22mm deep and 40mm wide. Should hold items up to 120mm tall before they do not rest properly…
2+ perimeters and 0.2mm layer height recommended, but should function with just about any settings. No supports needed. Should be a reasonably tight push fit over pots with toothed shafts.
Built to connect with Will Cogley's wonderful 3D printed animatronic eyes, which can be found HERE . More information about my build specifically can be found HERE . This was created to make display and movement easier for a public…
This two part mounting plate glues to a Tekton metric Allen key set and provides magnetic mounting to a pegboard. I used 6 magnets - 2 in the Allen key side and 4 in the pegboard side. This model uses my locking pegboard mount system for…
This controller was designed to allow guests and the general public to control an animatronic eye for an open-house event. It fully encloses an Arduino Uno and 9V battery, with a single ribbon cable connecting to the animatronic. More…
Inspired by Maker's Muse's Macro Keyboard: https://www.youtube.com/watch?v=MeYuIWGqquE A simple 3x3 arcade button panel for use as a macro controller, stream deck, or any other key-related needs. Design is held together with 6x2mm magnets…
This “Under Repair” sign is designed to snap over the top plate of a Prusa i3 mk3(s+). It uses a small tab at the center to clip on. I recommend printing in PETG to ensure the clip lasts longer, but it works in PLA too. Add a color change…
Print the central and upper shelves first, then the main part with pause points at 34.5mm and 37.5mm (pause just before the shelf begins printing). As it reaches these points, insert the shelves into the ledges. The printer will then…
These are all currently available results.
