Counting matching models…
I hate heat inserts ;-) This is a remix of https://www.printables.com/model/360900-revosix-hotend-mount to be assembled with hex nuts instead of heat inserts. Please give your kudos to…
A modification of the orginal bracket with added strength and removal of some unecessary recesses. If you like this design, please post your print with a picture. Anybody willing to support with a small donation is more than welcome ;-)…
A fast and cheap parallel guide for 16 mm track saw or router rails. After aligning the guide rail clamp it and remove the parallel guides. Printing recommendations Filament: PETG or better Infill: 15% I've designed two different versions…
A simple, fast and easy to print holder for your Philips One Blade. The less material you use the more sustainable it will be. My design principle for use in wet rooms is, to create parts that allow water to drain away unhindered to avoid…
A sturdy cordless drill holder for almost all cordless drills (Makita, Bosch, Einhell, DeWalt, Ryobi, Black&Decker, Worx, Scheppach and many more). This holder will take any drill chuck with 43 mm outer diameter and a maximum length of 70…
These bench dogs have a diameter or 19.9 mm and are thus fully compatible with the Festool and Wolfcraft MFT (and probably most other MFTs around). I created 3 different types for different wood panel thicknesses: 2.5 mm height for 3 mm…
I needed a 50 mm hose adapter with flange and ended up with this design. You can save some significant printing time if you set the infill pattern to "concentric". I also created a 1 1/4" thread to 50 mm Adapter to connect my side channel…
There are some other adapters in my designs to be found as well. Printing time @ 80 mm/s < 3.5 h If you like this design, please post your print with a picture. Anybody willing to support with a small donation is more than welcome ;-)…
Just a simple adaptor for a 40x10 part cooling fan. If you like this design, please post your print with a picture. Anybody willing to support with a small donation is more than welcome ;-) https://ko-fi.com/bigdee70035…
This is a remix of Wojteks model. I wanted to have a very clear identification about the charging status of the batteries. The status is identified by the covering flags. Parts are properly oriented, just drop them in your slicer and you…
Changed the design to be stronger and get a better connection to the carrier. I used 2 M3x10 bolts with washers to connect the clamp to the carrier. I also moved the hotend 5 mm away from the bolts. If you like this design, please post…
Fast and easy to laser holddown pins for both directions (x direction = smaller pin - y direction = larger pin). Recomended to be lasered out of 3 mm poplar plywood or birch plywood. You can find my box to keep them organized here:…
A fast and easy to print wall mount for your Surron charger. Don't forget to activate Supports: Everywhere If you like this design, please post your print with a picture. Anybody willing to support with a small donation is more than…
This holder is narrow enough to gives enough grip to keep a plug in place, even when mounted vertically. In addition, a spring-loaded baffle prevents the plug from slipping out. I have made two versions: a shorter version with open holder…
A simple tool to loosen the lid of your seawater filter, which is usually insanely tight due to negative pressure. I've created both versions: Spanner for seawater (single) - for the lid with one tab Spanner for seawater (cross) - for the…
I needed a wall mount to store my Ukulele and wanted something “different”. I came up with this design based on a plectrum shaped wallmount. This wall holder has a clear width of 40 millimeters and should therefore fit most ukuleles. If…
Please use the new Master Spool V2. All parts are 100% compatible with this version! Your fully variable Master Spool comes here. (Please read all before printing!) This spool's USP : If you change the spool to one from another…
V2 of the original spool Your fully variable Master Spool comes here. (Please read all before printing!) This spool's USP : If you choose a new refill manufacturer that uses a different diameter for its refills, you’ll only need to print…
A simple foot for your K40 and all sort of other machinery. The foot has a height of 30 mm. For assembly you will need: 6x35 mm hex bolt (1 pc) 6 mm nut (1 pc) 6 mm washer (1 pc) If you like this design, please post your print with a…
I needed a wall mount to store my Ukulele and wanted something “different”. I came up with this design based on a plectrum shaped wallmount. This wall holder has a clear width of 40 millimeters and should therefore fit most ukuleles. If…
A box to have your holddown organized where you need them. Glue two 8 mm magnets into the holes to have the box fixed to your lasercutter. Alternatively you can glue the box to the machine as well. I've created the box with the Inlay…
A small add-on for your Cloudray nozzle. The purpose of the add-on is to reduce the nozzle diameter from 3mm to 1mm. This allows pumps or compressors with a lower flow rate to keep the flow more constant. In addition, by extending the…
A simple and fast print to keep your tyre levers organized. PETG preferred in order to not deform it under high summer temperatures. If you like this design, please post your print with a picture. Anybody willing to support with a small…
A simple, fast and easy to print holder for your Megasonex toothbrush. My design principle for use in wet rooms is, to create parts that allow water to drain away unhindered to avoid mold and stains. Two versions available: Glue on with a…
A mount for your SKS Explorer that doesn't get in your way. To avoid unnecessary support structures and increase strength at the same time, I chose a screw connection. You will need: 2 bolts M3x10 mm or M3x12 mm and 2 Nuts M3 mm. If you…
These are all currently available results.
