Counting matching models…
If you want your keychain to look the same as in picture set in the slicer = Horizontal shell => Solid layer set to 0 both Happy printing Print Settings Printer Brand: Creality Printer: Ender 3 Pro **Rafts:** No Supports: No **Infill:**…
Easy to print and assembly disk caddy for gen8 and 9 HPE proliant. (Possible 10, 11 and 12. But I can not guarantee compatibility because I don't have access to anything else than 8 and 9 gen.)…
NEMA 17 VERTICAL MOUNTM Print Settings Printer Brand: Creality Printer: Ender 3 Pro **Rafts:** Doesn't Matter Supports: No **Resolution:** 0,4 Infill: 15% **Filament:** Creality PLA/PETG Black Notes: Happy printing Category: 3D Printer…
Full height PCIe bracket for Inspur YZCA-00431-102 network card Heavily modified remix of this model
It work but need little bit of polish. For mounting "caddy lock" to "disk caddy" Ive used nail with diameter of 2,2mm, For mounting cables to it Ive used hot glue. For powering it Ive used sata to molex adapter so Ican possibly disconnect…
2242 to 2280 dualsided nand ssd
uses 3mm heat inserts, and glue in the xt60 connector with CA glue
Happy printing Print Settings Printer Brand: Creality Printer: Ender 3 Pro **Rafts:** No Supports: Doesn't Matter **Infill:** Doesntt Matter Filament: Doesntt Matter ABS or PETG Recommended grey Category: DIY
HAPPY PRINTING Print Settings Printer Brand: Creality Printer: Ender 3 Pro **Rafts:** No Supports: No **Resolution:** Doesnt Matter Infill: perimeters 15 **Filament:** Doesnt Matter Should be PEGT or plastic with better heat ressistance.…
Implementation model of HPE Flex PSU
You will need a long M4 bolt and one 10 AWG (6.0 mm²) wire ferrule. For the version with a hook, you can either print it as a single piece or print the two-part version and glue the parts together afterward.
Pipette Stand... It can also be used for glass stirring rods and glass thermometers.
Should fit snug. Depends on your 3d printer. Either rescale the model or just fuse the 3d print to connector with soldering iron.
Lenovo tiny lid screw I bought a several non-working M710Qs that came without screws for top cover. So I decided to desig my own. It uses 4x16mm countersunk screws. There is no need for supports, just put it onto bed with the side of…
Replacement body for broken curtains weights. For joining two half to each others use CA glue, super glue or cyanoacrylate glue
Its accurate but rough reference model for this board " https://www.aliexpress.com/item/1005005196699571.html ". I don't recommend that board because I had two and both of them blew up before the print finished. On both 3.3v regulator…
These are all currently available results.
