All models

Counting matching models…

Shoehorn holder

20% fill PETG clear M3 double-sided tape on the back

Downloads: 223
Likes: 8
Rating: 5

Ender 5 Plus heating bed cable holder

This prevents the cable from lying on the floor and rubbing into other cables or the wall. The original connector is clipped on without ziptie (max 5mm width), ziptie can be used if desired. It is mounted with 2 pcs m5x12 and Nut m5T…

Downloads: 147
Likes: 31
Rating: 0

Order a print of this model

PrintablesOvland3D

Hygrometer and Temp Holder

This is a holder for easy access when changing the battery or placing it in another container. the frame is attached with double-sided tape Hygrometer model:KTT-TS8045ST-11D I use 9mm 3m VHB double-sided tape

Downloads: 134
Likes: 21
Rating: 5

Order a print of this model

PrintablesOvland3D

Coffee filter box/ Kaffe filter boks Nr.4

mine is printed on an Ender 5 plus with 0.6 nozzle, layer height 0.28, 100% infill. in PLA gray from Clas Ohlson :)

Downloads: 123
Likes: 18
Rating: 0

Order a print of this model

PrintablesOvland3D

IKEA Drybox Remix + Rewind

I have made some changes so that I can print it on my printer. Split the floor into 2 parts and made a few more changes when it comes to rewinding the filament roll. made so that the moisture meter fits better. And made more room for…

Downloads: 92
Likes: 32
Rating: 5

Order a print of this model

PrintablesOvland3D

Skadis USB cabel holders

for skadis board system. Intended for and holding Usb cables and other cables. The Holders is printed on an Ender 5 plus and can hold from 5pcs to 17pcs, nozzle 0.4, layer height 0.2, 20% infill, with supports. The Hooks is printed on an…

Downloads: 91
Likes: 8
Rating: 0

Order a print of this model

PrintablesOvland3D

Shoe horn Holder

with screws or double-sided tape Used PLA 20%fill

Downloads: 87
Likes: 2
Rating: 5

Order a print of this model

PrintablesOvland3D

Filament Run Out Sensor Mounting Ender3-S1 V1

this is for those who want the Filament in its own box to keep it dry and free of dust, above the Printer on its own shelf. I have use a m3 screw white a nut inside the Mounting. 100% fill, 1.75mm PETG Black and if you want one with the…

Downloads: 70
Likes: 14
Rating: 5

Order a print of this model

PrintablesOvland3D

Filament Run-Out Sensor mounting Ender3-S1 V2

this is for those who want the Filament in its own box to keep it dry and free of dust, above the Printer on its own shelf. I have used a m3 brass thread insert inside the Mounting. 40% fill, 1.75mm PETG Black and if you want one with the…

Downloads: 66
Likes: 9
Rating: 5

Order a print of this model

PrintablesOvland3D

Ender 5 Plus Hotend Support Cable Holder and dual gear extruder and filament guide

I have made this in PETG white, 0.16mm-40% fill with support. part 2 made in 0.12mm-40 fill, is attached with 2 pcs M3x16 or 12mm, 4mm pneumatic Fitting 1/4, 1.25 threads. The product is easily clamped over the step motor. Parts can be…

Downloads: 66
Likes: 6
Rating: 0

Order a print of this model

PrintablesOvland3D

Led List Holder for Ender3-S1

I have used PETG 1.75 Black. 20% fil 0.2mm. this is for Anslut Led Strip Item No.: 019945 Model No.:107265 don't need no tools after production, just clip on the frame

Downloads: 46
Likes: 7
Rating: 0

Order a print of this model

PrintablesOvland3D

O3D for HeroMe BLTouch Right straight out Mount

For the HeroMe Gen7 concept and fits the Probes Wings..

Downloads: 37
Likes: 2
Rating: 0

Order a print of this model

PrintablesOvland3D

Frigerator shelf for Bauknecht

This is printed on an Ender 5 plus, standing at an angle. I have attached two files, one with support and one without. I made it in ABS If you make it with support, I recommend cutting it off, not breaking it. 2 layers. 0.2 layer height.…

Downloads: 35
Likes: 10
Rating: 0

Order a print of this model

PrintablesOvland3D

Ender 5 Plus Hotend cable holder X axis on side.

These are made in PETG white, 0.20mm fill 20% and whit support. Part 1 is for cables upwards. Part 2 is for cables straight out to the side. the products can be changed on Onshape.com Part 1. Onshape Part 2. Onshape

Downloads: 34
Likes: 7
Rating: 5

Order a print of this model

PrintablesOvland3D

Filament rewind box kit

Do not open the filament box to reinsert the filament. this set up I have made a gearbox on the side so you can rewind the filament again without removing the lid. have linked the rollers together with O-rings so they work together. see…

Downloads: 31
Likes: 10
Rating: 5

Order a print of this model

PrintablesOvland3D

Marshmallow holder

this is designed to hold 45 marshmallows on a stick. so that the children can easily take one. they come with garnish. I made this in PLA, 15% fill size 150x150x60mm hole 6.4mm

Downloads: 25
Likes: 5
Rating: 0

Order a print of this model

PrintablesOvland3D

AA battery holder with drawer, space for 56 pcs

here you can take out 4 batteries at the same time or just one at a time, the tray is filled up simply by pushing it back in. Short video:

Downloads: 25
Likes: 5
Rating: 5

Order a print of this model

PrintablesOvland3D

Q-Tip boks

printed white 0.4 nozzle, layer height 0.2 PLA 10% infill used m3 screw for the nobb

Downloads: 22
Likes: 6
Rating: 5

Order a print of this model

PrintablesOvland3D

TFT 70 V3 Mountingbox

I have made it with 4 walls to have enough material around the holes so that I can make holes bigger for insert threaded inserts. if desired.. otherwise it is 0.2 layer height and 10% infill. optional what you want to make it in I have…

Downloads: 21
Likes: 2
Rating: 0

Order a print of this model

PrintablesOvland3D

Downlight Hood

This is made with PLA 20% fill and with support and upside down. This fits Namron Alfa Reflector warmdim art no: 3234654 can use petg. but the best is self-extinguishing plastic. :)

Downloads: 21
Likes: 2
Rating: 0

Order a print of this model

PrintablesOvland3D

AAA battery holder with drawer, space for 80 pcs

here you can take out 4 batteries at the same time or just one at a time, the tray is filled up simply by pushing it back in. short video:

Downloads: 19
Likes: 4
Rating: 5

Order a print of this model

PrintablesOvland3D

Holder for magnifying lamp head.

Holder for magnifying lamp head. Model no: 425-040 from Anslut printed with Petg white, 100%Fill

Downloads: 18
Likes: 2
Rating: 0

Order a print of this model

PrintablesOvland3D

Box for 20cm hot pot base, space for 5 pcs. Gryte underlag 20cm plass til 5stk.

Printed in PLA with 0.6 nozzle, 0.28 layer height, no supports required.

Downloads: 18
Likes: 3
Rating: 0

Order a print of this model

PrintablesOvland3D

Flexit vacuum cleaner bag holder

I have printed this in PLA with 0.6 nozzle, 0.28 layer height and 100% infill. this fits several types of bags.. helps to keep the bags in order so they don't get thrown around the room somewhere. PS my photo shows one that is lower. it's…

Downloads: 17
Likes: 2
Rating: 0

Order a print of this model

PrintablesOvland3D

Toothpick stand

Toothpick stand is made in PLA, 20% infill I used support, 0.4 nozzle.

Downloads: 12
Likes: 1
Rating: 0

Order a print of this model

PrintablesOvland3D

Mainbord Boks fits original

this is printed with PETG 100% infill with supports, 0.2 layer height, 0.4 nozzle, there is also an m3 brass thread insert for attachment to the card, the support is attached with m3 screws 15mm,

Downloads: 11
Likes: 1
Rating: 0

Order a print of this model

PrintablesOvland3D

Lenco PA-260 Front Leg

I printed in PLA 20% fill, 6 layer walls and 12 layer top.

Downloads: 10
Likes: 1
Rating: 0

Order a print of this model

These are all currently available results.