Counting matching models…
Printed in TPU @0.25mm layer height at a 45 degree angle to avoid flat spot. Also used Fuzzy skin Voronoi to approximate the seat plastic texture. Mirror along the X-Axis for left and right side. The bumper slides snuggly at the end of…
Key for Yakima SKS lock with code A133 Based on Yakima control key design
Key for Yakima SKS lock with code A136 Based on Yakima control key design
Key for Yakima SKS lock with code A155 Based on Yakima control key design
After mounting the mirror using this backet for Mercedes Sprinter ( https://a.co/d/06l5MwLM )and the Wolfbox bracket ( https://a.co/d/071Q7swu ), the mirror wasn't seating at a good angle and the view was partially blocked by the…
Printed in ABS @0.3mm layer height, 4 wall loops, 25% infill. Held in place by two screws in the front and two zip ties in the back. The camera is stuck in place by the double sided tape provided by Wolfbox See screenshot for printing…
Printed at an angle for strength in ABS @0.2mm layer height. I also sanded the flat part for a good seal.
The bracket bolts to the factory hitch mount on the rear driver side of the Sprinter Installed on my van (2022, VS30,W907) factory tow bar. It should also work on any Sprinter with the factory Mercedes Sprinter tow package (2008+) Printed…
These are all currently available results.
