Counting matching models…
Allows Intel RealSense D435 camera to attach to GoPro compatible mounts. Optional zip tie strain relief on USB cable with included shim. My thing https://www.printables.com/model/326547-gopro-compatible-mount-for-v-slot-20x20mm-extrusio…
Mounts Intel RealSense D435 camera to OpenBuilds 20x20mm extrusion. Optional zip tie strain relief on USB cable with included shim. My thing https://www.printables.com/model/326548-base-for-v-slot-20x20mm-extrusion can be used as a base…
Holder for allen wrenches using these T handles: https://www.printables.com/model/70527-ufs-094-t-handles-hex-allen-key-wrench Holds wrenches that do not increase monotonically in length. Position depths from bottom of handle arm in mm:…
Latest version of my Logitech M575 trackball 45 degree angled base. The primary change was to increase the diameter of the anti-rotation pins to increase their robustness. The angle of rotation on the 45 degree plane was also increased…
Remix of printables user @pyrho 's "Raspberry Pi 5 Case (snap fit)" that adds VESA 75x75mm mounting tabs to the base.
Remix of https://www.thingiverse.com/thing:4523772 by ysiegel. Changes to bottom: Increased the thickness of the base by 2.8mm and added indentations to hold four M4 nuts to match the VESA 75mmx75mm mounting pattern. Added a 1.6mm deep…
Manually copied the STL from https://www.printables.com/model/99035-car-seat-headrest-hook “Car Seat Headrest Hook” by M 3D in Fusion 360 and lengthened by approximately 22mm to fit seats in a 2025 Honda CRV Sport-L Hybrid. Close copy of…
The idea for this came from OUTLET COVER WITH SHELF by endofblock https://www.thingiverse.com/thing:4627201 but it was redesigned in Fusion 360 to mimic a 3/8" oversize Leviton Decora outlet cover we had where we thought a shelf would be…
Faceplate/angle bracket for mounting four pairs of Anderson Powerpole connectors. Requires four of these "wall" mounts: https://www.thingiverse.com/thing:1205771 20mm deep to fit nicely on 20mm extrusion. Sized for M3 machine screws to…
Adapter to connect a 1.25" O.D 1" I.D. Vacuum hose to a Hitachi C10FSH sliding miter saw. See picture of drawing for dimensions. Printed in PETG, 0.2mm layer height, 3 perimeters. Small end on print bed.
Holder for Bondhus Metric T-Handle Allen Wrenches. Designed to fit the 2, 2.5, 3, 4, and 5 mm wrenches from my set.
This is a remix of the bottom/back portion of the OpenMV H7 Camera case found here https://openmv.io/collections/cams/products/openmv-cam-h7-case and here: https://github.com/openmv/openmv-boards/tree/master/cad It allows three M4 nuts to…
Base for RPLIDAR A2. Raises the RPLIDAR 46mm to allow it to scan over other objects mounted to the same surface that are less than approximately 70mm tall. All mounting holes are sized for M3 machine screws. RPLIDAR mounting holes are…
Remix with two variations of: https://www.thingiverse.com/thing:4426908 Variation 1: Rounded and chamfered edges. Resized screw holes for M3 (0.5 pitch), added printed "threads" to holes in base, and extended them all the way through…
Replacement bottle for a Kraus soap dispenser we have where the top of the original bottle broke off. Threads are ISO Metric M22x3. You can test print the file "M22x3 Threads v3.stl" to verify the fit with your hardware before printing…
This is still a work in progress. I have not yet tested the cover in a real installation. If you use this, please post a picture of your installation as a “make”. Allows a Reolink Video Doorbell PoE to be mounted over a single gang…
Shower Squeegee holder that clips onto a Hansgrohe hand shower slide bar. Printed in PETG with 0.6mm nozzle, 0.35mm layer height Prusa FAST profile. Squeegee shown is a GUTEWERK.
The CTR Electronics SRX Mag Encoder is very popular in FIRST robotics, but can be difficult for teams without machining capabilities to use without an adapter because of the geometric tolerances required between the magnet and the encoder…
Action camera compatible mounts that attach to the barrel of a Nerf Rival Nemesis MXVII-10K. Use to mount camera, laser pointer, or other accessories. M5 mounting screws. You will probably need a ball-end allen wrench to tighten the 4x…
Extrusions to mount an Adafruit DotStar LED strip to a Parallax Arlo Robot plate. Note that the spacing of the first LED to the last LED is different than the normal LED spacing (see picture). You will need to print seven of the…
Large Drink Coaster I designed in honor of FRC Team 2834, The Bionic Black Hawks. https://team2834.com/ Two sizes: 106mm and 111mm
Simple adapter designed to facilitate mounting a FogBuster Bolt-on Mount (P/N 00315) to 20mm extrusion using a M5x25mm machine screw, a M5 washer and a t-nut appropriate for the extrusion. The extrusion pictured is 20mm OpenBuilds V-Slot.…
Mount designed to hold Parallax Laser Ping Sensor on Parallax Arlobot. Sensor mounting machine screw hole sized for M2.5 tap. Base mounting holes sized for #6-32 machine screw, spaced 1.75" center to center. Print Settings Printer Brand:…
This is a set of adapters for the Parallax Arlo Robot that allow 20mm V-Slot extrusion to be mounted vertically through the 35mm (approximately) holes in the Arlo Robot's plates. Adapter mounting holes are sized for M5 machine screws.…
The nut from a pruning saw purchased in Germany fell off and went missing. The nut I purchased from a hardware store in the USA had the correct metric thread but did not fit into the saw's recess. Therefore, since “to a man with a 3d…
Offset adapter for French Drain Man Downspout Cleanout with Leaf Filter. My general contractor screwed up and a downspout was not properly aligned with a buried drain embedded in concrete. I designed and printed this adapter to mitigate…
These are all currently available results.
