Counting matching models…
Parametric protective case/toolbox with a groove for an optional seal. You can modify width, length, height, corner radius, screw hole size, hinge position, rib and box thickness. Print settings any rigid filament 0.2mm layer height 0.4mm…
Shelf for Ikea Skadis boards, 20x10cm in size, attaches with t-clip system. Print settings 0.4mm nozzle any layer height no support default infill any rigid filament
Bookend in the style of a broken Greek pillar. Size The model is quite massive. Feel free to scale it down. However, keep the thickness of the base in mind. I would not recommend scaling below 0.7 of the original size. My print settings…
Blank model of credit card. Emboss/deboss anything you want, or use blank. Great for product photos where you want to use something other than real ones. Print settings any material any nozzle size 0.16mm layer height is recommended no…
A cute mini ghost to decorate your home during spooky season! Just 2cm tall. Feel free to scale - I've tested the model down to 1.3cm in height. For version with magnet, have a look here…
Bookend in the style of a broken Greek pillar. Size The model is quite massive. Feel free to scale it down. However, keep the thickness of the base in mind. I would not recommend scaling below 0.7 of the original size. Versions There are…
Simple sponge & rag holder for side of your sink. Print settings any rigid material any nozzle size (0.4mm recommended) any layer height (0.2mm recommended) default infill supports needed in default orientation Assembly Parts should fit…
Display stand for keychains or similar small, lightweight items which have approximately 10cm in height. The stand itself is 15cm long. Print settings any rigid filament any layer height no supports in default orientation 20%+ infill…
Decorative maple leaf, 5cm in size, 1mm thin. Feel free to scale. Print setting any filament 0.4mm nozzle (or smaller) 0.2mm layer height no supports default infill Additional models from series Oak leaf -…
Seed starter with a light dome. Works with 1cm wide LED strips. Use a timer to turn them on/off in a given interval. Print settings any rigid material 0.4mm nozzle any layer height no supports default infill Caution! The legs on the light…
Remix of Vallejo Paint Rack , with a differently designed and easier-to-print stand. Should fit Vallejo 17ml bottles and similar (Army Painter, misc 15ml bottles, etc..) The stand is designed to support 2 racks. I may add version for…
Simple anti-slip half-ball feet, 1cm in diameter. Feel free to scale. Print settings TPU or other soft material 0.4mm nozzle 0.2mm or smaller layer height no supports default infill (may be increased for heavier items )
Decorative oak leaf, 5cm in size, 1mm thin. Feel free to scale. Print setting any filament 0.4mm nozzle (or smaller) 0.2mm layer height no supports default infill Additional models from series Maple leaf -…
Single dose hopper for Baratza Encore or Baratza Encore ESP coffee grinder with Baratza logo lid that can be used to weight coffee beans. There are two versions of the hopper, one with and the other without bean catcher. The one with bean…
Ring-shaped box for a ring with magnetic closure. It is ideal for a surprise when proposing to your loved one. Materials 2x 3x2mm magnets glue foam Print settings any rigid material (PETG feels more premium, PLA works just fine) 0.12mm…
Ultralight Prusament refill spool, weights less than 150 grams for whole spool. Print settings PETG or other durable filament any nozzle size 0.2mm layer height recommended 2 walls/perimeters no supports default infill → increase for…
Ultralight remix of Bambu Refill Spool that weights less than 125g. Print settings preferably PETG or other somewhat temperature resistant filament 0.4mm nozzle any layer height default infill 3 walls/perimeters no supports needed
Simple square zen garden, 20cm. Print settings default orientation any rigid material no support any nozzle size
Greek pillars with numbers, to be used as trophies.
Simple makeup organiser with 12 2,5x2,5cm and 4 12,5x2,5cm spaces, 5cm high. Feel free to scale. Print settings any rigid filament any nozzle size (0.4mm will work the best) any layer height no supports needed
Decorative chestnut leaf, 5cm in size, 1mm thin. Feel free to scale. Print setting any filament 0.4mm nozzle (or smaller) 0.2mm layer height no supports default infill Additional models from series Oak leaf -…
Classy snowman, look at that cylinder hat! Feel free to scale to any size you like. Assembly You will need glue and following parts, print individually or use small_parts.stl file. 3x button 2x eye 1x nose 1x snowman 1x hat Print settings…
Sewing clamp, to be attached to desk. 13cm tall with 10cm wide clamping surfaces. Print setting any rigid material any nozzle size 0.2mm layer height 30%+ infill supports only for bottom part of clamp and outer part of slot - see pictures.
Accent strip for Baratza Encore (ESP). Fits into the slot at the bottom of the grinder. Feel free to scale in Z axis for optimal fit. Print settings any material any layer height any nozzle size any infill no supports
A phone stand (horizontal) for Ikea Nordmärke wireless charger. Assembly There are 4 indents for anti-slip feet with a diameter of 8mm. Feel free to glue your preferred ones or use the model as is. Print settings PLA or other rigid…
Magnetic portafilter dosing funnel for 54mm baskets, designed to fit Sage/Breville but should work with others too. Assembly You will need 8 3x2mm (WxH) magnets. The hole tolerance is just right for press fit in my case. You may want to…
Blank US sized coins, to be used as props or similar. Print settings any material any nozzle size adaptive layer height for best accuracy default infill no supports
Soft flask drying stand for decathlon 250ml or 500ml soft flasks. There are 5 versions: 1x 250ml 1x 500ml 2x 250ml 2x 500ml 1x 250ml + 1x 500ml Print settings any rigid filament any nozzle size (0.4mm recommended) any layer height default…
Stem Mounted Minitool Holder for Canyon G5 ST0040 Stem. Introduced along the new Canyon Spectral 2024. Original description Stem Mounted Minitool Holder for Canyon G5 ST0040 Stem. Designed to hold Canyon FIX Minitool 6+1 beneath the stem.…
Circular cutter for cookies/dough with 5cm diameter. Print settings any nozzle size any layer height any rigid material no supports needed default infill
Simple lint to test bed adhesion.
Simple baking supplies organiser, 4x 20mm and 3x 30mm with 5cm height. Each slot is 82mm wide. Outer dimensions: 84x178x51mm (WxLxH) Print settings any rigid filament any layer height 0.4mm nozzle no supports/infill required
Simple cylindrical anti-slip feet, 1cm in diameter, 0,5cm in height. Feel free to scale. Print settings TPU or other soft material 0.4mm nozzle 0.2mm or smaller layer height no supports default infill (may be increased for heavier items )
Tool for tightening GoPro and other action camera mounts. There are 2 versions, normal is 7,5mm thick, slim is 5mm. Both are 8cm long and have hole for keyring. Print settings any rigid filament any nozzle size (0.4mm recommended) default…
Low-poly number toppers, ideal for your cakes! Feel free to scale according to your needs. By default the numbers are 5cm tall with 5cm stick. Print settings any rigid filament any layer height default infill no supports needed
Parametric box with sliding lid You can modify width, length, height, corner radius, etc. Print settings any rigid filament 0.2mm layer height 0.4mm nozzle no supports needed default infill Assembly Slide the lid into the groove of the…
Simple cover to change color for Syrp genie mini turntable. Can be used to simply and quickly change the color and/or texture. Print settings any filament any nozzle size any layer height no supports default infill
The 3D Benchy, a seasoned old tub. She's sailed the stormy seas of 3D printing, tough as old wood and built to last. Now she’s finally got her figurehead, a missing piece now proudly displayed on her prow. Print settings ahoy fellow…
Witcher themed face mask for rubber duck. The mask size is 55x68x34mm and the duck in photos is roughly 9cm big. Feel free to scale as needed. Print settings 0.4mm nozzle 0.2mm layer height any rigid material 0% infill 0 bottom shell…
Gasket for tubeless Presta valve, designed for Lezyne CNC TLR Valve 44mm, may work for other presta valves too. Print settings TPU filament (softer is better) 0.4mm nozzle 0.12mm layer height (any should work) no supports default infill…
Glasses for observing solar eclipse. Print settings preferably PETG (PLA may work too) 0.2mm layer height 0.4mm nozzle no supports needed default infill Assembly You will need solar filter and double sided tape. I can recommend the Baader…
These are all currently available results.
