Counting matching models…
Here is a two part tulip model featuring the stem and the bulb. The stem inserts into the bulb with a tight fit then twist to lock in place. Depending how your print goes, you may need to file or sand the stem a little to make it fit…
This is my Tokarev TT-33 model. It is a solid (no moving parts) 1:1 scale model. You can of course scale it to whatever size you like in your slicer. I made my example at 1:3 scale on my resin printer. You could scale it down for GI Joe…
Here are some ammunition models of various caliber. They're good for props or demonstration purposes. Here are the calibers that I currently have: -.22 LR -7.62x25mm Tokarev -.32 ACP (.32 Auto) -.380 ACP (.380 Auto, 9mm Short) -9mm Para…
This is my 1911 model. It is a solid (no moving parts) 1:1 scale model. You can of course scale it to whatever size you like in your slicer. You could scale it down for GI Joe if you wanted or make it full-scale for a costume or…
Here's a heavy duty gaming spoon ready to handle all your spoon related games! if you don’t know what I’m talking about see below: https://bicyclecards.com/how-to-play/spoons Don't bend your metal spoons and disposable plastic spoons…
Here is a small cute octopus. I designed it with solidworks based off a stuffed animal I have (named Squishy). The 3d printed octopus is not actually squishy unless you print it out of some sort of squishy filament. Print Settings…
This is my North American Arms (NAA) mini revolver model. It is a solid (no moving parts) 1:1 scale model. You can of course scale it to whatever size you like in your slicer. You could scale it down for GI Joe if you wanted or make it…
Here is my aluminum can model. It's the 12 oz type that would contain soda or beer. I was going to make it to use with the can holder contest, but I was too busy to come up with a design in time. I made a version without the punt for…
Here are 4 different size jacks that work with a simple screw design. You will need one base, one screw, and one saddle. There are 4 sizes. 5_8 indicates that the jack is 5 inches tall when fully screwed in and 8 inches tall when the…
I made a 1:1 scale model of a White Flyer Blackout clay pigeon target mostly because I thought it would be a fun thing to model and I've been really into sporting clays lately. I figure a 3d printed clay pigeon probably doesn't break nice…
This is a protractor for measuring corners. For instance it can be used to determine the angle between two walls. It has the advantage of being able to push up against two flat surfaces as opposed to a regular protractor that is more of a…
Here are some furniture sliders round and square 1.5", 2", and 3". The 3" is a little heavier duty. You can scale them to make them work best for your application. I made the 1.5" square ones to protect my floors with metal shelving…
Here is my Type 82 Kubelwagen 1:18 scale model. My original make of this was a little tight on clearances and required a lot of filing to get it right so I opened them up a little. Hopefully they fit well enough now, but let me know if…
Here is my Halloween pumpkin/jack o'lantern model. I have included the solid pumpkin model as well as the hollow pumpkin model and seven different jack o'lantern faces. There is also the model file for the top, which you will probably…
Here is a D'k tahg for a Klingon warrior as seen in Star Trek. It consist of three parts including the blade and two halves of the handle. It is assembled with two 6-32 screws and nuts. One side of the handle features a round counter sink…
Here is my Willys MB or Ford GPW 1:18 scale model. The Jeep was produced in 1941 by Willys-Overland for the War Department however by the end of 1941 it was apparent that Willys could not meet demand and Ford began making the GPW. I think…
This is my Colt 1903 model. It is a solid (no moving parts) 1:1 scale model. You can of course scale it to whatever size you like in your slicer. You could scale it down for GI Joe if you wanted or make it full-scale for a costume or…
This is a center hub piece for the Mexican Train Dominoes game. It has 8 slots for building track off and the center holder for the starting number domino. It is for dominoes that are 1x2 with filleted corners and ¼ inch thick, but it…
Here is a model Club Car Carryall 500. The .stl is at 1:18 scale but I've been printing my Club Car models bigger. I think 1:18 looked smaller then I wanted when I put it in my slicer, so I scaled up to 1:16. I included the flat bed and…
This is a ¾ female GHT (Garden Hose) cap. You can use it to cap off a hose, bibb, or spigot. It will require a rubber washer like all GHT fittings that seal by washer rather than mating threads. I used this to cap off a leaky hose bibb at…
Here is my rubber ducky model. I made it for a cruise that I am going on. I modeled it plain, as well as with a variety of hats. I also modeled it with a plaque that has the Jeep logo because I know a lot of people like to have them in…
Here is a scale miniature model of a 4 string 17 fret banjo. I made my example on the Anycubic Photon resin printer. If you print it on a filament printer, you might need to scale it up to get all the detail. It's about 2.5 inches long as…
This device snaps onto the laundry detergent jug to hold the cup under the spout. It also helps catch drips or spills to keep it off your floor. I use “All” brand detergent in the 141 oz jug, so I designed it for that. I don't know if it…
Here is a model Club Car Carryall 300. The .stl is at 1:18 scale but I printed my models bigger. I think 1:18 looked smaller then I wanted when I put it in my slicer, so I scaled up to 1:16. Also see my Carryall 500 version here:…
This little snail is the first thing that I made on my 3d printer. I wanted to test out its abilities and work out the kinks using a model that I made myself. It prints best at a slower print speed. I use 30 mm/s. I can print it without…
Here is my rolling tally counter design. It can count up or down from 00 to 99 with one wheel for the ones and one wheel for the tens. My original design just had a serrated knob to turn. However my printing turned out rather stiff, so I…
This is my Star Model B pistol model. It is a solid (no moving parts) 1:1 scale model. You can of course scale it to whatever size you like in your slicer. You could scale it down for GI Joe if you wanted or make it full-scale for a…
Here is my travel tissue case. It is designed to work best with the type of tissue pack that opens at one of the ends, but you could probably make it work with others too. I think it will be really nice for throwing in your luggage,…
A stand to hold up clay pigeon targets. This can make for fun targets at the shooting range. I also have a model of the clay pigeon itself that fits with the stand, which you can find here: Clay Pigeon Target Model by nightfox90 |…
I saw some devices like this being sold for sustaining copepod populations in an aquarium and thought I could make that myself and maybe even improve on the design. The design features 5 3.5-inch plates with a corrugated design that is…
I made this box organizer insert for the game Codenames because every time I open it up all the components are a complete disaster. Codenames is a tabletop game by Vlaad Chvatil that is published by Czech Games Edition. Here's a link:…
This is a replacement horseshoe for Champion brand auto trap machines. Part SKU AT1023BK. I made this part using Solidworks.
Here is my deciduous tree model. I made it for my Pathfinder RPG character (protector tree) but I think it could be used for lots of model scenery type applications like maybe your dollhouse or model train display. I made it using my…
I made this to go in my 2 inch square trailer receiver when I'm not towing a trailer. I did a few somewhat random designs just to give it some decoration. I use my trailer for moving the e-bikes, so my wife requested a bicycle design. If…
Here is a small pumpkin. It is about 2 inches tall and about inches in diameter unscaled. It has 8 lobes and a short vertical stem. I think it’s pretty cute and festive for fall time. You could probably make it look pretty cool with a…
These are subdividers for the “Hart Stack System 3 Case Parts and Tool Box Organizer, Fits Hart's Modular Storage System” which you can get from Walmart at the link below: Hart Stack System 3 Case Parts and Tool Box Organizer, Fits Hart's…
I designed this to fit on the end of a piece of conduit that I had lying around for use in cleaning out gutters. Or maybe you need a giant-size back scratcher. You could scale it a little to fit whatever pole that you plan on using. It is…
This is a gear based off of and compatible with the standard K'nex gear. The mating surfaces of the gear are wider than the standard gear and the hub features reinforcing lugs that prevent the tan clip that acts as a key from slipping or…
Here is a round plant stand that I made for my wife's succulent that is in a round pot. It lifts the pot up to keep it off the shelf and has a lip for watering. It is goblet shaped and lets the plant dangle gracefully around it. It fits a…
Here is a bucket clip for attaching tubing to a five gallon bucket. It clips on to the side side of the bucket and the tubing pushes tightly through the hole. I use it when siphoning water out of my aquarium when doing water changes so…
Here is an assorted battery holder/organizer for 20 AAA, 16 AA and 2 9v batteries. There is a holder piece and a cover. The holder piece slides into the cover and secures with little detent bumps and there is a thumb hole to pop it open…
This is my Beretta 92/m9 model. It is a solid (no moving parts) 1:1 scale model. You can of course scale it to whatever size you like in your slicer. You could scale it down for GI Joe if you wanted or make it full-scale for a costume or…
This is designed to hold sponges, scrub pads and the like on a divided sink. Note that the space to span the divide between the sink bowls is 1 3/8 inches. It is designed to allow the sponges to drain and dry out while keeping them…
Here is my 3D print Soprano Ukulele. The instrument is fully functional once completed. I am quite pleased with how this turned out and have thoroughly enjoyed having a homemade custom ukulele. I have constructed two of these. The orange…
Here is my Thanksgiving turkey with a Pilgrim hat model. Usually, I make my models to need little to no support, but on this one I'm embracing the support. I used tree supports at 60 degree overhang and it turned out well. My original…
DISCLAIMER: I have no pets or children, use discretion in how you use mouse poison! Here is a small mouse bait station that can hold 2 Top Gun mouse bait blocks. It consist of a cover a box, a lid and two pins (Print 2 per station) that…
Large Franklin Gothic font numbers 0-9 that are roughly 11 inches high. Each number has 2 pluggable screw holes designed to accept #10 sheet metal screws for mounting. I've included plugs in the “Plugs” folder to plug the holes and cover…
This is a knife rack that holds your knives in a drawer. It can hold your knives with the blade down and point facing the rear of the drawer, which is much safer than having a pile of knives in a drawer. Also it makes it easier have your…
I made these divider compartments to further subdivide Stanley brand organizer boxes. The kind you can find here:…
I made these furniture legs to go on my IKEA Alex drawers ( ALEX drawer unit, black-brown, 141/8x271/2" - IKEA ) so that they are the same height as my Alex desk ( ALEX desk, black-brown, 52x227/8" - IKEA ). They line up with the IKEA…
I was thinking a normal tape dispenser relies on its hefty weight and rubbery bottom to keep it in place. However a clamp could be used to secure a tape dispenser to a shelf or table even better than the dispensers weight. It is based off…
This is my classic teddy bear model. You can find it sitting, standing, and sometimes even holding your heart. I made this model using Solidworks. You may also like some of my other cute animal models: Rubber Ducky Thanksgiving Turkey…
I was tired of constantly knocking over my deodorant, so I designed this organizer to hold a deodorant stick, a toothbrush a reach flosser and comb. However, I'm sure it could hold a variety of handy things. No supports are necessary for…
This is designed to hold sponges, scrub pads and the like beside the sink. It is designed to allow the sponges to drain and dry out while keeping them securely contained. It has a pitched slope floor to allow water to run off into the…
This is a design that I first did several years ago that I thought I'd dust off and come up with some new applications for the Printables Clamp-On contest. The design uses a central drive gear with a knob that turns two screws to open or…
Here is my aluminum 2 piece can container model. It is modeled after a 12 oz soda or beer can and is sized to fit a 7.5 oz can. I have an open top and a closed top version. The open top version is designed so that you can open a 7.5 oz…
Here is an assorted battery holder/organizer for 8 AAA and 6 AA batteries. There is a holder piece and a cover. The holder piece slides into the cover and secures with little detent bumps and there is a thumb hole to pop it open when you…
Here is my model of a BK-2 armored Russian gunboat that was requested by a friend. It is modeled at 1:43 scale. It is assembled from 5 parts, or 4 parts if you don't want the underwater section. The turret rear gun and gun mount should…
I've been meaning to do more flower models for some time now since my tulip model has been so popular, but haven't gotten around to it. Well, here is my daffodil model. Unfortunately, I don't think that I can make it as printer friendlyas…
This is a paper plate holder that reinforces your paper plates. My wife asked me to make this and at first I didn't see the point because you could just use a regular plate. However, when you think about it you might be traveling or…
This is a tool for removing the screw on bung or plug from the plastic drums that I work with. Maybe it works for other drums, but I don't know. One side is for the larger 2 inch bung opening and the other is for the little opening.…
I designed this soap dish with SolidWorks to work with the soap saver pads that you can get for cheap on Amazon or wherever you buy that kind of thing. https://www.amazon.com/s?k=soap+saver&ref=nb_sb_noss_2 The bottom of the dish is…
Here is a small square plant stand that I made for my wife's string of pearls succulent that is in a small square pot. It lifts the pot up to keep it off the shelf and has a lip for watering. It is goblet shaped and lets the plant dangle…
Here is a knife that I designed for cutting folded paper on a flat surface. So, you can use it to cut gift wrap or other paper to size on a table or floor. It's just the right sharpness to cut light paper and doesn't have a point so that…
Here is my pull string whirlybird design. The two halves of the launcher are held together with screws and house a spindle. The spindle is attached to the pull handle by a string such that when the string is pulled it rotates the spindle.…
One of my coworkers requested that I make a timecard holder to have by the timeclock for their timecards, so I made this. It can hold 5 timecards and is intended to be wall mounted. I made this model using Solidworks.
Here's the business card holder that I 3d printed and have been using for years. I made it with my name and company logo, but you probably don't want that, so I made it plain. It's not to fancy, but it's elegant, simple and effective.…
This is a tank stand for a small tank such as a water heater expansion tank. I use a lot of these for work, so it is nice to have a stand to set them on. It features an opening to allow for plumbing connection to the tank. I designed this…
Here is a 0.25 inch peg and a card with holes ranging in diameter from 0.240 to 0.275 inches in 0.005 inch increments. This can be used to help determine the appropriate amount of clearance to achieve a desired fit. This model was made…
I wanted to make a new sign for my new house so that people didn't wander up my driveway. I went with “PRIVATE DRIVE NO OUTLET… GUESTS AND DELIVERIES ONLY”. I made a variety of versions though so you can say it the way you want to. I have…
Here is my Christmas tree model. I'm calling it a Christmas tree though it could just be a generic coniferous tree. I have models with and without the star. Also with and without the base as it would be easier to print without. I made…
This is a design that I've found helpful with my aquarium. It is a chute that fits with a standard type glass aquarium canopy giving you a good place to feed, dose medicine, add water etc. The need arose for me with setting up my…
Here is a stand for quick custom print out miniatures. I used it for a Dungeons and Dragons campaign that I ran. The stl is 1 inch by 1 inch base and about 1 inch tall. Print and cut out cards about .9 by 1.5 inches to slide into the…
Here is a simple but useful pegboard model with 0.25 “ diameter holes with 1” spacing. The board is roughly 6" x 11". It's actually 10.95" x 5.95" to leave a little clearance if you want to stick them next to each other. I've also…
Here are a variety of cover plates for light switches and outlets that I have encountered in the Untired States. I intend to expand this and feel free to comment if there is anything in particular that you'd like to see. I started with…
I made this relay bank as part of a thermostat system for the HVAC systems where I work. As such I made the labels correspond to the heating and cooling levels, but I also made a generic version that just labels it 1-4. The design…
I was asked to make a travel casse for a Wegovy GLP-1 injection pen. I don't know much about GLP-1, I was just given a pen to make a case for, so I don't know how simmilar it is to other GLP-1 medications or other injection pens. It holds…
I made this for a booster pump that I was installing. The electrical box that was on the pump was so small that it was impossible to wire it up, so I made this lid to give some extra space. I think it will work with a variety of Dayton…
This is a lid prop to keep the lid on a top-loading samsung washing machine from shutting all the way. My wife asked me to make it. We don't want the lid open all the way whennot in use, but we don't want it closed all the way because…
I got tired of playing games with bad score tracks, so I decided to make my own. This universal score tracker can score up to six people from 0-499 with a 1s, 10s, and 100s (up to 4) column. It also has a lid so that you don't loose your…
This is an adaptation of my Willy's MB Ford GPW Jeep model for The Crash Derby Tabletop Game. I simplified the model a bit for smaller scale printing for a game piece and subtracted the Crash Derby chassis to make a jeep "hood". Crash…
We use pint and gallon sized Nalgene bottles at work and it seems like people break the lids more often than the bottles. So, I've found myself with a surplus of bottles without lids and I decided to 3d print some to remedy the defecit.…
These are all currently available results.
