Counting matching models…
this can be used on the Trident This Requires 2 M3 heat inserts in the Key to work properly. 3 M2 heat inserts for the pcb Klicky version This a Mount for the Voron Dragon Burner on a MGN12H. Can be used on any printer with the belts on…
This is a Set of Frisbee Golf Disc's Deigned by Gul. We have a Putter & Crazy Putter We have a Mid-Range We have a Fairway We have a Distance
This is a remix Made to work on the Bambu with a 4mm nosel. I also built in custom support for the iris item 3. Added More Clearance so the iris does not lock up and the ring moves easier. That way, you don't have a bad overhang when…
There are two versions of the top of the Rook one is for 150mm rails and one is for 200mm rails. Please note that the 150 covers the rods, so are not compatible with the 200mm.
This is a mount for the rook MGN9C carriage This will require 2 M3 heat inserts in the holes
I hand meshed this with calipers and redesigned it to have tolerance. I have also printed them multiple times to test. Print the parts on the flat bottom side. You will need to reorient it in your slicer.
I want to thank virgi for testing the 2020 variance and his input has helped with the design. the 202 image is from virgi and the bishop image is my own. please note it uses the same BOM as the rook with a couple more idlers and 2 more…
Thes feet are for the Rook MK1 and you don't need to support them as long as you print them on the flat angled surface.
This is a mount for a V6 body for the rookery. You need to use the rookery long 4020 for it.
This is a press-on fit for a leaf blower. You can also glue it in. please use ASA or Carbon Fiber Nylon. ASA us used for outdoor use.
This is a tolerance test. It is meant to test if the gates can open and overhang up to 60. Pop the Gates and get inside. Use a small screwdriver at the base of the gates and pry them open.
This is the top components of the rook only and it allows you to use rods instead of rails for your rook.
This is a Lid for the Rook MK1 base so that it stuff does not fall onto your electronics. There are two modules, one that is chamfered and one that is not. Note this is a raised logo so you can do a color change and get the logo to stand…
This is a print in place Bambu Lab Duct for the X1C, P1P, P1S, and P1E. The supports are already added on the vent area and will need to be removed after printing. see photo posted A 3mf file has been provided painted and not panted…
This is a Cake topper that will fit Hotwheel's on it fits a 200mmx200mm bed. Added More Roads
This is so you can find those loose nuts in your drawer.
This requires 3 M3 heat inserts in the key to make it work. This has ben created so you do not have to change your Kingroon you can mount it to your rails directly. Works on most Kingroons. We have a MGN12C mount We have a MGN12H mount
This bunny is meant to hold a basket or be used as a tabletop decoration. This bunny will need support. I recommend using organic supports.
This is a mount for the Voron Dragon Burner that mounts to a MGN12C you will need (2) M3 heat inserts to mount the after burner to it.
I had this piece break on my kid's MJX Hyper Go RC car so I designed a new peace please note it took me 6 iterations to get it to fit just right. Also, it will need a little bit of support. I have oriented the STL in the correct…
This is a print-in-place bunny. No supports needed. I recommend you print it with 10-15 infill to reduce the print time.
This is a V0 printed bed plate I designed for my original Rook. Note it works but I recommend you print it with 4 top and bottom and sides and 40 infill for stiffness.
This is the top of the Bishop 3D printer that has been adjusted for the MGN12H rails. WARNING: I oreanted them in the best position for printing; please verify that your layer adhesion is good before attempting these prints. if there are…
I have placed the BMG mount for the Rook MK1.1 and West 3D Rook
this is a remix, and I redesigned it so you can print it in place with no support.
This is a switch mount that mounts on the motor of a rook so that you can use an old board if it does not have end stops on the board. The mounting holes are for a KW10-Z1P Micro PCB 2239 switch and are typical at 15mm on the center.…
This Model is made for all your Scraping needs. A little support is needed on the back of the tower section so that it can scratch stuff like ice. why not print V2 as a fidget as well
This is a Zombie key that is on Nero's printer.
This is a Kerbal Pod for the Kerbal minifigs on Printables. Can fit 2 to 3 with helmets. once you print the POD and Heat shield, Glue them together with Gloop or super glue to get a cool pod.
It prints flat, and bringing has been added. It is only the mount. The rest has to be downloaded form the original creator.
This is a sign of "Thats what she said!" Two sizes are posted and I recommend you use Cura muli-layer print for them.
This is a key for a snow globe Key I made. It uses a 3.5mm nut. Has been tested and printed.
These are all currently available results.
