Counting matching models…
PrusaSlicer profiles made specifically for Sovol SV06 Plus (SV06+) 3D printer, to make the most of its size, speed and accuracy. Version 1.10 update: profile for SV06 (non-Plus) also included - based on Prusa MK3. The profiles are based…
Medium capacity ammunition box for 100 pcs of 9x19mm Parabellum bullets – made with IPSC, IDPA or similar shooting sport in mind, where lots of bullets are spent during every training. High capacity box (150pcs) available here –…
High capacity ammunition box for 150 pcs of 9x19mm Parabellum bullets – made with IPSC, IDPA or similar shooting sport in mind, where lots of bullets are spent during every training. Medium capacity box (100pcs) available here –…
Dyspenser zaklejek do przestrzelin tarcz strzeleckich. Pasuje do zaklejek 20mm z tego linku – https://tarczestrzeleckie.com/zaklejki Ewentualnie podobnych zaklejek sprzedawanych w rolkach: szerokość taśmy max. 25mm średnica zewnętrzna…
Custom afterburner detent for Thrustmaster HOTAS Warthog throttle. After installation there is no need to rise throttles to pass afterburner activation point. Simply push throttles over instead. More information here:…
Currently the following sizes are available (notes size / max. block height): 90x90 mm / 95 mm 90x90 mm / 45 mm 85x85 mm / 45 mm 83x83 mm / 80 mm 83x83 mm / 45 mm Contact me in the comments section if you need a different size. Printing…
Compact, portable smartphone / tablet foldable stand. Can be used with most phones and even tablets (except really large ones). Stand angle is adjustable in a wide range. Dimensions folded: 70 x 90 x 20 mm Printing instructions Base and…
Heavy duty, universal spool stand / winder for filament spools. Robust design, simple assembly, reliable operations. The spool is protected from pulling it up during rewinding with lock bars, which are hold in place by lock pins.…
Keeping low humidity in a gun safe is important. This little container will help fulfilling that task. Best is to use few dehumidifiers in different places of a safe. Print out the STL files and glue in four magnets (6 x 3 mm neodymium…
In some cases the genuine Sovol filament run-out sensor causes too much friction, leading to extrusion problems. One of the issues is the sensor itself, which can be addressed by using the following sensor casing mod:…
Fill in the container with a desiccant of your choice (beads of 2 mm or larger). Most popular desiccant is silica gel – which is available as a loose beads in various sizes and colors, also color changing to indicate a necessity to…
3D model of Ruger (firearms company) emblem / logo. Two size versions of the emblem are available: 100 mm 120 mm The provided 3MF files contain all parts (STL objects) to be printed. For multi-color / multi-material printers it is…
Printing Print in vase mode, upside-down, no supports needed. Increase outer wall to ~0.8 mm for added strength.
Genuine Sovol filament sensor is causing lots of friction. Actually so much that in some cases the print quality is seriously affected (printed layers are not consistent). This happens due to faulty design of the sensor itself and also…
3D model of War Thunder simulation game emblem / logo. Various versions of the emblem are available: 180 x 87 mm 200 x 96 mm 225 x 108 mm 250 x 120 mm The provided 3MF files contain all parts (STL objects) to be printed. For multi-color /…
DO NOT OVER-TIGHTEN THE SCREW Like my design? Lots of work goes into every 3D model I publish for free download. If you would like to appreciate my efforts, just buy me a coffee. Thanks! https://ko-fi.com/makcorner Do not forget to check…
3D model of Beretta (firearms company) emblem / logo. Two size versions of the emblem are available: 100 mm 120 mm The provided 3MF files contain all parts (STL objects) to be printed. For multi-color / multi-material printers it is…
12V Pb power bank, ideal to drive 12V COB LED light strips, i.e. in a gun safe internal installation, where no other power source may be available and the safety is valued. Pb battery is much more safer than modern LiIon/LiPo batteries –…
Use good quality 12mm double-sided foam tape to mount the organiser to your desk. Printing Print upside-down, no supports needed.
Important Update Alternative, PTFE based, sensor mod is available here: https://www.printables.com/model/488517-mak-sovol-sv06-run-out-sensor-mod-ptfe In my tests the above mod works even better than this one. But please feel free to try…
If you need to check reliability of your 3D printer filament management system here is simple test tower model you can use. The model consists four bodies, which you can assign different colours and / or materials, easily generating…
Vertical stand for Lenovo ThinkCentre M900 mini-PC series.
3D model of Browning(firearms company) emblem / logo. Two size versions of the emblem are available: circle diameter 100 mm (max 195 x 134 mm) circle diameter 120 mm (max 234 x 161 mm) The provided 3MF files contain all parts (STL…
Bambu Lab X1 / X1C comes equipped with small carbon filter, which is supposed to filter the air blown out from the chamber. It is quite tiny though and offers no mechanical filtration. This is what this filter container is trying to…
3D model of International Practical Shooting Confederation (I.P.S.C.) emblem / logo. Various size versions of the emblem are available: 75 x 92 mm 100 x 122 mm 120 x 147 mm 150 x 184 mm The provided 3MF files contain all parts (STL…
3D model of Mossberg (firearms company) emblem / logo. Two size versions of the emblem are available: 100 mm 120 mm The provided 3MF files contain all parts (STL objects) to be printed. For multi-color / multi-material printers it is…
Simple, but very useful in a workshop - stackable - set of boxes for small items, like screws, etc. Category: Organization
Print is straight forward, no supports needed. Brim may be required, as bed contact area is not large.
If you want to move the spool from the top of your Sidewinder X1 to its side, this mod is for you. Assembly Print all three files. Use M5 x 45/50 mm bolt as an axle for the wheel (use the printed distance ring as well). Attach whole…
Container dimensions: diameter 12mm length 84mm Print with low layer height, 0.16 mm or below (to print well working thread). No supports needed.
The Sullivan Dynatron S603 is very popular, heavy-duty starter for gas and nitro RC model engines. Combined with Sullivan S613 Helicopter Extension Wand it creates great set for nitro helicopters, easily able to start 90 / 105 class nitro…
3D model of Mossberg (firearms company) emblem / logo. Two size versions of the emblem are available: 100 x 163 mm 120 x 196 mm The provided 3MF files contain all parts (STL objects) to be printed. For multi-color / multi-material…
3D printed swashplate leveler. Handy tool to setup proper geometry of RC helicopter main rotor head. This one will work with XLPower Specter 700, or any model helicopter with 15mm main shaft and similar swashplate diameter.
Crankshaft clamp needed to lock the shaft of RC nitro engines when tightening up the clutch nut. This one fits O.S. engines: GT15, 105HZ, 91HZ / SZ / RZ (including R versions, i.e. HZ-R). Replacement for genuine O.S. crankshaft clamp part…
Not much to say, webcam cover for A4Tech PK-910H or any other tube-style camera with 28.5 mm diameter. Easy to print, no supports needed. Use piece of standard 1.75 mm filament as a hinge rod.
Yaesu FH-2 knockoff from Aliexpress is cheap and has very basic design. It is working though and is good enough for occasional usage. It is however almost fully open and prone to potential electric shorts. That is the problem this frame…
3-axis gimbal for GoPro cameras, meant to be attached on standard mounts of Tarot 680Pro hexacopter. However it should fit to many other multicopters. I use it with STorM32 BGC gimbal controller and Quanum 2208 stepper motors. Even if…
Genuine Up Mini 2 door hinge is pretty tight fit, thus quite easy to get damaged, even during normal usage. For maximum strength print with 4+ walls, 100% infill and possibly low layer height.
Wall mountable housing for Smart Deye Dongle V4 from Smart Home Integrations.
Works with 3-yaw chuck that comes originally with Vevor YS-2260A / MX-600 / MX-400 and similar models. Like my design? A lot of work goes into every 3D model I publish for free download. If you would like to appreciate my efforts just buy…
Drilling holes to mount optional quick battery release lock in XL Power Specter 700 model helicopter can be tricky. This drilling tool will provide required guides, so there is not room for a mistake. Simply place the tool, drill 2mm…
Some basic covers for lathe bed rails to protect them from chips. Works with Vevor YS-2260A / MX-600 / MX-400 and similar models. Like my design? A lot of work goes into every 3D model I publish for free download. If you would like to…
There is a space between a collar and the body of the gearbox. This spacer fills the gap and helps to keep the collar parallel to the gearbox. Works with Vevor YS-2260A / MX-600 / MX-400 and similar models. Like my design? A lot of work…
Gearbox of YS-2260A need zero-maintenance to work correctly. This washer helps to keep the knob parallel to the face of the gearbox and make operations more smooth. Works with Vevor YS-2260A / MX-600 / MX-400 and similar models. Like my…
A holder for popular 5W work lamp, which you can find on popular Chinese portals under "5w working led light flexible magnetic stand". Works with Vevor YS-2260A / MX-600 / MX-400 and similar models. Like my design? A lot of work goes into…
These are all currently available results.
