MAK Gun Safe Desiccant Container
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Must have for your gun safe, easy to mount inside – attached with magnets to any metal surface.
- Rating
- 4.857 / 5
- Likes
- 126
- Downloads
- 720
- Makes
- 7
- Views
- 2,964
- Reviews
- 7
Updated at source:
Model information
- Source
- Printables
- Category
- Other Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Keeping low humidity in a gun safe is important. This little container will help fulfilling that task. Best is to use few dehumidifiers in different places of a safe.
Print out the STL files and glue in four magnets (6 x 3 mm neodymium magnets). Glue the magnets with epoxy or CA glue (so called super-glue).
Fill in the container with a desiccant of your choice (beads of 2 mm or larger). Most popular desiccant is silica gel – which is available as a loose beads in various sizes and colors, also color changing to indicate a necessity to replace or reactivate. Just search for “silica gel loose” on Amazon, eBay, etc.
Easy to print with PLA, PETG, ABS, ASA or similar. No supports needed.
Dimensions: 116 x 45/50 mm (two diameter variants available)
There is no-magnets, more universal version of this model available here – https://www.printables.com/model/386133-mak-universal-desiccant-container