Counting matching models…
Simple hot glue gun stand. It is for smaller guns, Fusion360 file included if you will want to edit it to fit your tools. There is small reservoir for leaking glue as well. 26.02.2019 Added extended version(bigger retention reservoir).…
Heltec V2 (and V3, both stl version are provided) Meshtastic LoRa device case. 18650 Li-Ion battery holder included (for longer protected 18650 battery). I recomend connect some high-gain antenna (some better and bigger than stock one…
Handy case for 1.28 round display (GC9A01 driver), 240x240. There is also hole for cables on side or you can use display pins at the bottom. Easy print, no supports. BambuLab X1C 0.2 20 infill PLA+ no supports
PCI covers for PC case. I have used it in HP ProDesk 400 PC. X1C BambuLab 0.2 20% infill PLA+
Finaly Raspberry version with proper NVMe disks support:) So i have decided to build simple NAS with two mirrored NVMe disks and openmediavault software. Disks are installed in Pimoroni NVMe Base Duo for Raspberry Pi 5. I have bought…
Antenna "Volcano" holder Small antenna holder, printed in one piece. For 28mm diameter pipe. Fusion 360 file included. Prusa i3 MK3 20 infill 0.2 PLA
Battery adapter for Einhell cordless drill. I want some source of power for my portalble TS101 soldering iron and as i have multiple drills around i have just used their battery:) As connector a have used 6mm faston male connector and…
25mm Pipe (Tube) holder I am using it as antenna holder, but it will work with any 25mm (and probably smaller) in diameter. It is pretty tight fit for 25mm tube, but you can tight it even more with knob. Fusion360 file included if you…
NVIDIA Jetson Nano case with camera holder(IMX219-160IR) I have used small 60x60 CPU FAN as well, you can edit source file if you have different fan or you can use it without fan at all if your Jetson Nano is not running under heavy load.…
External speaker for ham radio. You can use it as external speaker for your radio like Motorola, ICOM, etc. There is M5 nut inside(for external holder), just put them inside to the holders and secure them with soldering iron or hot glue,…
Big custom 7 segment display made of 56 + 12 neopixels(WS2812W), driven by Raspberry Pi Zero W. It is approx. big as A4 paper(landscape). Each segment is made of 4 WS2812B leds(just split WS2812B strip to segments with 4 Leds on it). It…
I have needed some small box for very tiny smd parts before i solder them. Better to keep them in some secure place and do not loose any of them:) No box was around so i just quick draw some container and sent to the printer. Maybe it…
Small Wifi (or other antenna which will fit) antenna holder. Easy print, no need supports. Prusa i3 MK3 0.2 20 infill PLA+ no supports
Filament holder for PM spool. ( https://www.filament-pm.cz/ ) Fusion360 file included if you want to modify it. Prusa i3 MK3 0.2 20 infill PLA no supports
Universal remote controller with ESP32 and NRF24L01 wireless module. Ideal for testing robotics projects, wireless communication or portable gaming device projects. You can program it as game console, remote controler, etc. There is…
Small table for phone or anything else what you want to reach from bed:) It fit to IKEA MALM bed, no screw or gluing to furniture needed, it should fit well(but there is some holes ready for screws if you want it). It is from two parts,…
Originaly just test of some pinions, rack and spur gears. But i have found that it is quite satisfying so you can play with it as well:) There is two versions of rack, one with some stopper on both ends, second one is without stoppers, so…
Some parts for joining few pipes together. For tubes about 28mm in diameter. For right angle holder i have used some rubber sheet in it for better grip. Than M8 bolt and nut is used to hold it together. Fusion360 file included in case you…
Be safe, protect your health, use Fume Extractor when soldering! This is version number two of my previous Power Bank powered Fume extractor. This time i am using 12V PSU and PWM control! Inside is Xbox One 12V fan but it will fit…
Simple stand for some syringes with soldering flux. It is designed to store it in fridge(or anywhere where will fit). Simple print, no need of supports. It is from two pieces, and holding together with six small 2.5x12mm universal screws.…
Wireless temperature and humidity sensor with cool round display (GC9A01 driver) and RTC module (DS3231) for actual date and time. It is using EPS32 so there is WiFi connection and additionally even using NRF24L01 wireless module inside…
Small hook for holding some stuff like cables etc. It will fit to any table with approx. 25mm table desk thickness. **************** Edit 10.03.2025 **************** Added "worm" (grub) screw. If desk_hook_v2_screw_20_mm.stl will not fit,…
Small playground (maze) for pacman figures. I have made just playground, pacman and ghost are scaled models of these users: https://www.thingiverse.com/thing:2773943 https://www.thingiverse.com/thing:832250 Pacman is scaled to 22%. Ghost…
Holder for soldering paste syringes (183C and 138C type, 20mm and 16mm diameter). According to manufacturer it should be in the fridge, so i am keeping them there with this stand:) I have added few holes and compartments for small…
I have seen some 16x16 WS2812 pixel matrix on Aliexpress.com and coul not resist to buy it and make something with it. So here is my creation, 16x16 WS2812 LED matrix panel. I have created some stand for that as well but i think it could…
BOFA fume extractor accessories. For 50mm pipe. Fusion360 file included if you need to modify it. *************************** Edit 6.11.2024 *************************** Added v4 version. There is new frame for 120x120mm PC FAN to improve…
Just need to clean and organize some stuff on my desk. So i have created this small various parts organizer, it should be stockable, when parts are not bigger then inner (cca 18mm) dividers. Easy print, Fusion360 file included if you will…
Rack hook for helmet(or anything else:) It should fit some standard warehouse racks. Simple print, the hook itself contains some small support for easy print. Fusion360 file included if you want to modify it. Prusa i3 MK3 20% infill 0.2…
Yet another thermometer with humidity sensor. Sensor: HTU21D Display: TM1637 Arduino Nano Fusion360 file and Arduino code included. Just rename it from nano_TM1637_HTU21D.txt to nano_TM1637_HTU21D.ino There is some wall mount optional…
Tool (key) for opening milk container of Jura coffe machine. I have printed it verticaly with just small support of ring in bottom part. Prusa i3 MK3 0.2 20 infill PLA+ supports (only for bottom part)
I built NAS server from old HP ProDesk G1 MT computer. I have added some 2.5" SSD disks there so i needed some holder for them so i have print holder for 6 SSD and slide whole holder to 5.25-inch half-height drive bay (under CD-ROM…
Simple internet radio. 2x 3W stereo amplifier and VS1003/1053 Mp3 decoder for streams. Fusion 360 file included if you want edit some parts. Source code included, just rename extension from .txt to .ino and open with Arduino IDE. You can…
Holder for 15x15mm antenna boom. You can set it with +-50 degree and secure it by knurled knob. Ideal for testing HB9CV or Yagi antenas:) Fusion360 source file included in case you want to edit it. Prusa i3 MK3 0.2 20 infill PLA+ no…
I needed extend my workbench space so i have printed some holders and foots for 28mm steel tubes and create shelf for my equipment. I have glue some rubber feet to foots for better grip. These are cutted from some rubber sheet (about 2mm…
Stand for few pencils as big pencil sharpener. No glue needed, M10 screw for blade is included. Mini screwdriver included too. X1C BambuLab 0.2 20 infill PLA+
Small box for small items storage (for example for some smd or other electronics parts). 40x40x22 small box with lid and practical holder for 9 of them. Bambulab X1C 0.2 20 infill PLA+ no supports
Little door stopper with 3D printed spring:) It can be fitted on approx. 25mm thick desk. It is made from 3 parts(bottom-desk part, top part, spring), it is very easy and intuitive to assembly. Fusion 360 file included in case you want to…
Baofeng UV-5R battery smart charger. Original charger was not working so i have re-made it to better nicer cooler smart battery charger:) It has polarity protection, overcurrent protection(fuse and current measurring) and…
Sometimes i was "surprised" when some toilet paper jump on me during my thing, so i have decided to make my own toilet paper holder tool to close and lock it. It is small key, easy print without supports. Fusion360 file included. Print it…
Another cube, this one for 1.8 inch TFT ST7735 128x160 display. It is driven by ESP32 so you can control it over WiFi etc. I have added NPN transistor to control LCD brightnes with PWM as well, but you can just connect LED (LCD backlight)…
Whirlpool Refrigerator door handle(build-in version) replacement for broken one. There is build-in support for screws holes(just remove it easily with knife or screwdriver. Fusion360 file included. Prusa i3 MK3 0.2 20 infill no…
Shelly Plus 1PM smart plug case. Easy print, no supports needed. I have printed with color strip just for nicer look:) X1C Bambu Lab 0.2 20% infill no supports
Air valve opener for Rockshox forks (maybe will fit to other brands, not tested). When you want to pump more air to your fork (or just check with manometer) sometime it is hard to open that top air valve cap with hand as it may be fit…
Small capacitor case for two 10000uF/25V capacitors. I am using it for testing purposes (filtering and keep some settings of radios). Maybe it will come handy to someone as well. It is for these capacitors:…
Spirit level magnetic holder. It is for 14x6mm spirit level tube. I have added two small 10mm/3mm diameter magnets. It is holding together by three screws and there is additional three holes for another screws if you need to mount it to…
Hook for IKEA SUNNERSTA holder. I have changed geometry of it slightly for easy print on the side. X1C BambuLab 20% infill 4 walls 0.2 no supports
Nice outdoor thermometer (and humidity + pressure) station. There is ESP-12E (ESP8266) for WiFi connection, powered by two AA batteries. It should last long as that MCU is using sleep mode. Case is not waterproof as it has some holes in…
Output voltage of this step-down converter is adjustable (3-35V), i have set it to 5V (input is 12V, but it is quite wide range of input voltage, 4.5-50V). Max. current about 3A. I have used that one:…
I needed replace some card readers case so i have print some, maybe it will come handy for someone as well. Small one is 1:1 of original one and it is secured with screw. Bigger one is mentioned just cover whole card reader and it is…
This M33 big steel (not sure what material exactly it is) bolt is great. I like it, i do not know why but it is massive and heavy and beautiful:) So i have decided to make stand for it. And as it is missing its nut i have printed it as…
Small desk signal lamp holder activated from CCTV recorder. You can ativate by whatever you want it is small module with LED and buzzer, just apply 12V AC/DC to it. Easy print, no support required. Buzzer module used: AD16 Series Plastic…
Pillar warning beacon, to make sure that nobody will hit it:) I have created PCB design and sent it to JLCPCB for manufacturing it. Then i have solder some SMD components so it is small and should last mounted outside. I have inspired…
As i am using eMMC instead of SD card for Raspberry Pi 4 i was not satisfied with standard/official cases for raspberry. There is no protection for that fragile eMMC module/adapters. They are sticking out from case and this is not ideal.…
Another thermometer with humidity and light intensity sensors. There is two displays so you can see temperature from both side. Of course it is on WiFi with web gui for settings and reading values, it can provide json data for another…
Simple WiFi and bluetooth yagi antenna holder. There is some M10 nuts in base so it is bottom heavy and stable. Also i have used some rubber feet under it. Ideal for testing or increase bluetooth range (i am using it with my headphones…
Beko vacuum cleaner snap clip hinge spare part. I recommend printing it at an angle and using a brim; I also partially "sunk" the model into the print bed (along the Z-axis, check photos) by about three layers (-0.6 mm). If you print it…
These are all currently available results.
