27 models
I want to make my own Music-Box. This is a second-try for the Comb. (First try was by lasercutter, but that don't work well) Printer: Creality Ender 2 Rafts: No Supports: No Resolution: 200 Infill: 100 Filament material: PLA Notes: Use…
From time to time I try out how good are the results with usual ai-prompts in the freeplan. This time it corresponds with the needs at work, that I should test the ability of the LLMs. Next to a well-known task to create a…
Spinning a spinning top is great fun. It’s even more fun when you’ve modified and printed it yourself. :-) Lay the top-side flat on the printing bed, so no extra bed adhesion is needed. Use a 5mm oder 6mm pin to give it a spin. Attached…
Yes, I know there's a cool library (Belfry OpenScad Library, v2) to achieve all sorts of mechanical parts, but sometimes someone wants to tinker around for themselves. The best working screws with my experiments are the ones with two…
WARNING! You can come close to parts with high voltage - you should know what you're doing! With knowledge to (de-)solder SMD-parts on a kitchen stove I repaired a LED lightbulb. (thanks to Uwe for the broken parts! :-) ) After the…
I wanted to create a lampshade for my bike for repairing... 3D-Printing consumes a lot of time, therefore i played around with the idea to lasercut the thing in slices. You have to glue the slices together, but on the other hand it looks…
Quick n Dirty made with the gear-library and a cylinder Print Settings Printer brand: Prusa Printer: i3 MK4 Rafts:No Supports: No Resolution: 0.15 Infill: 15 Filament material: PETG
Just half a year before I puzzled over the problem how you could tell the internal angle of a n-corner-shape by how the shape corner touches an outer circle. :-) (I intended to solve it in my head, just for the fun, not by looking in…
Just for the show I recreated the android figure from scratch while attending an exhibition at Dingfabrik / cologne.
I started to invent an own tiny game. First thing is to create some unusual dice. Here there are... Print Settings: Printer: Prusa i3 MK4 Rafts: No Supports: No Resolution: .2 Infill: 15% Filament material: PLA
A quick n dirty enclosure for one round 18650-cell and a charge-controller / step-up device The code is a real mess, but hey it works - feel free to optimize the code :-)
Cologne Carnival Costume Accessory Carnival in Cologne again and I decided that I wanna be a pirate - like Guybrush Threepwood in Monkey Island. Hmmm - indeed I want to be Guybrush once. Basic stuff was a second hand bought blue coat…
I mentioned the cute duck emoji at our fablab, someone said "Print" and challenge accepted... Playing around with gimp, Inkscape and prusaslicer does the job. Use Gimp for flatten the color-range. Use Inkscape for redraw bitmap to colored…
Simple railmount holder for a typical bicycle-LED-Frontlight from Aldi for my bike. OpenSCAD sourcode included, so you can customize the thing. Printed on the Ender3 V2 with skirt
Cologne Carnival Costume Accessory It's carnival in Cologne again and I decided that I wanna be a pirate - like Guybrush Threepwood in Monkey Island. Hmmm - indeed I want to be Guybrush once. Basic stuff was a second hand bought blue coat…
Just as a test I took the openscad linear extrude and created a difference with a cube to have a screw :) Looks a little bit as math art. Printer: Creality Ender 2 Rafts: No Supports: No Resolution: 0.2 Infill: 10%
Mount for the Aldi rechargeable Lamp for my bike. Studie, wie man etwas am Lenker befestigen kann - hier Fahrrad-Lampe von Aldi, steckbar OpenSCAD-Source included Printer: Anet A8 Rafts: Yes Supports: Yes Resolution: 0,2
I remixed https://www.thingiverse.com/thing:1457760 to get the thing hollow and with holes for LEDs. I added holes for LEDs and a carrying ring on the ridge so that you can hang the dome with the light show around your neck. The base is…
Hello again in the spinning top arena - here are some new models and a slightly changed OpenSCAD-source beneath for your your joy spinning around. Now made with rotate_extrude() an plane shapes in OpenSCAD instead of hull() and balls. so…
Just for learning OpenSCAD and to design own bricks bigger than Duplo to create furniture I started with OpenSCAD for the right size for the bricks. It's still Work in Progress and should lead to something like a realsized sofa or a chair…
Made in a hurry - holder for a beer brewing hose to refill the green beer in bottles from a stainless steel mashtun. Now improved version of the clip. Printer: Prusa i3 MK4 Rafts: Yes Supports: Doesn't Matter Resolution: 0,2 Infill: 15%…
Here are all pieces together for download. You can print your favorite planet as shopping cart coin. All is customizable as the OpenSCAD-Source is layed by. If you don't have the font symbola look out for antoher font with…
A little helper to refill toothpaste from a regular-sized toothpaste tube into a travel-size toothpaste tube. Designed in a hurry, so no customizer. If you want the OpenSCAD source-code pleasewrite a PN. Refill cone starts with 17mm and…
My first ever made own design with OpenSCAD. This little thing is a repair part for a common 5-Port RJ - 45 netgear switch. Someone stepped on the Powerplug cable and ripped it off. I designed this little plate. You can put the Powercable…
This is a replacement for the side wall lock of the Siemens Surpresso S60. Maybe fits in other machines? The part that is screwed for locking and was outworn over the years. Simple but effective replacement with a OpenSCAD thing. The…
At work we had a bunch of old HHDs to destroy and some LWL/Cat7-cables to lead nicely in the racks. So I disassembled the HDDs for the neodyms and printed a mount with a hole for the magnet. The mounts fit on the Würth LFK 60x90. First I…
The spacer of our peppermill snapped broken. With these two parts you can repair the thing for using maybe another few years. The cross fits in the bottom and center the shaft. Next put the spring in place between, followed by the tube to…
These are all currently available results.
