Counting matching models…
a bird feeder There are two parts, you don`t need any support. There is a simple closing system to put the two parts together and fill and refill the feeder 06.26.20 update: I add a new base file(no_column). I improved some details, so it…
Settlers of Catan replacement parts(city, settlement and bridge) I create this things during the last jear. The models are close to the original parts. Print instructions print settings: LH: 0.1mm Nozzle: 0.3mm
I reworked the "Landy Mini" tire to use it for the Landy/Ranger 1/8. I would like to print the tires by myself, so I scaled the tire from the „Landy Mini by 3D Sets from 1/16 to 1/8. I reworked the tire to print it without support and add…
Made a candle for valentine's day or just for fun! You can scale the molt in „z“ as large as you need. Print instructions Print with ABS( liquid wax has about 50°C)!
4 outer walls, print with brim and support. Make sure that the tail is good supported. Layer high: 0.1 - 0.12mm I recomend ABS or an other solid material. update 06.12.2024 : I reworked the model and the rider should now sit more securely…
My daugther loves mermaids and playing LEGO, so I modelled and sculped this flexi mermaid fin. Print instructions I optimized this creation for fdm-printer(the base side is as flat as possible). There is one file with support, thats how I…
Instruktion: please print the testfile at first: all joints should be moveable without brute force. If the joints not moveable scale the model up; If the joints too loose, scale the model a little bit down. 0.5% or 1% up or down should be…
A tape dispenser for tapes: 50mm wide and 75mm diameter -You need a blade of a box cutter(18mm); --- seperate 6 segments of this blade in one piece. -all other parts printed with PLA. - print the bolds with 100% infill(you can also use…
a tin can lid (suitable for 75mm diameter tins) Print instructions I print that thing with TPU 98 After the 2. Layer(0.5mm) I changed the color. I rise the temperatur 10° C more than usual (215° → 225°) to get a beautiful surface of the cat
A Tatra KT4d adapted for the LEGO railway system with working doors. https://youtu.be/cFzfJQch48E
printable chain with climbing squirrel Print instructions There are two parts: -You need good bed adhesion and well adjusted material to print the chain. I choose the layerhigh(depend on the slicer)in that way to get a clear first…
printable chain with panda bear/multicolor printfiles(my bear is painted) Print instructions There are two parts: -The chain is simmilar to my squirrel necklace, so you need good bed adhesion and well adjusted material to print the chain.…
Printsettings: LH: 0.2mm no support(there is support on the strap) infill for the top: 40% I print the feeder in PLA, if the feeder hang in the sunlight, I recommend PETG You need a buildplate at least with 22 x 22cm With base_1.1: I…
8 x 2 brick with an 8% grade to get a gradient of one brick per track
Print with ABS or another more heat resistant material! No support, clean the small overhangs after the print I coat the mold with dish soap beforehand. The wax should not be too hot. After filling the mold with wax, keep dopping it up…
a rotary knob for my bathtub Print instructions mat: ABS layerhigh: 0.2mm
only insert the protection in the audio-set station. Das Teil wird eingesteckt/aufgelegt.
a spare part for the white train window that simulates a frosted glass(BlueBrixx conversion car/Umbauwagen) settings: PLA transparent 195° 100% infill in one direction(no bottom/no top layers) part cooling as low as possible I recommend…
Print with 5 outer walls and 70% infill to get a solid replacement part.
-You can use it to compensate for unevenness of up to 4 cm. -Suitable for most of 190g gas cartridge stoves with a bottom diameter of 9 - 14.5 cm. -A spirit level(app) can help you to set it perfectly. --The thread of the screws can be a…
Print with PLA 0.2 mm no support, (support is included remove it carefully) How to use this thing:
you need: 5x30mm bolt and nut silicone washer pipe cover rosette 1/2 zoll print with TPU95 Lh:0.16mm no support the top part have a left-hand thread
fast and easy print no support, print slowly goes well with lego minifigures, with lego friends figures it is a little bit big!
These are all currently available results.
