Counting matching models…
A remix of Macroglossum's baby raptor model. To get the best results, either scale down the layer height (I use 0.10mm), or scale up the model (120% is a good size). I recommend PLA, although I'm sure PETG would work too. I like to use 0%…
This is a cool model that I found on Sketchfab from RISD Nature Lab. Please follow print instructions: Keep the model in the orientation that it is set to for ideal print quality. If you don't use the print file, just add tree supports by…
This is a cool model that I found on Sketchfab from RISD Nature Lab. This model is easy to print. Just follow these quick tips and you should have no troubles printing. Make sure that the model is printed in the same orientation as given…
This is a cool model that I found on Sketchfab by RISD Nature Lab. This model is actually quite easy to print. There are just a few adjustments you need to make before printing. Add a raft at 2 or 3 layers for the best bed adhesion (or…
This is a Bald Eagle skull model that I found on Thingiverse by MacEwanBiology. Printing this model may look intimidating, but it's pretty easy when following these steps: Keeping the original model orientation is recommended Add tree…
This is a photogrammetry scan that I did of a Megalodon tooth. It was compiled from 137 images and processed in RealityScan and cleaned up in Blender. Recommended print orientation: 45 degree angle and tree supports around 43 degree…
This is from a 3D scan that I did with RealityScan and cleaned up a little bit in Blender. Super easy print. No supports. I like to print mine at 5% infill with 2 shells. Looks great in Marble PLA. The 75% scale model fits the Prusa MINI.…
Just something fun I made in Blender. Super easy to print. No supports required. If you are worried about bed adhesion with the feet, just add a raft with 2 or 3 layers. Nothing fancy. Any filament should work. PLA, ASA, PETG, PC, even…
(Update) I have provided a mini version that prints much quicker than the original. Just a little model I made during the holidays. Super easy to print. I do recommend using a very small amount of supports between the base of the tail and…
Just a low poly remix I did of miniShev's triceratops. Very quick and easy print. Does need some supports.
I liked miniShev's shark model so much that I decided to make a low-poly remix of it. I have to versions: A low-poly version of the original geometry A flat bottom one that is much easier to print and is also supportless . enjoy ;)
I have this sign layered for those who want to use multiple colors without having the multi-material upgrade. I highly recommend PLA, although PETG should work too. The dimensions are 140mm x 200mm x 5mm. 0.15mm layer height and 5% infill…
This is a photogrammetry scan that I did of a Mosasaurus tooth. This is a super wasy For best results, follow these print settings: The footprint is smaller than preferred, so have either a raft or a brim to prevent the print from falling…
These are all currently available results.
