Counting matching models…
There are already a ton of these on Printables, but most of them were for the wrong calipers or used the wrong magnets. I would fix this, but nearly all of these don't have CAD source files uploaded in a libre format for libre CAD…
This is a super simple camera mount that I made to bolt to the 2020 extrusion so I could mount a Logitech C270 webcam outside the enclosure of my Voron Trident. This design only requires one M3x20 bolt for the camera and one M3x8 and…
I don't know who all these people are who have access to the backs of their printers to load their filament. I have my filament spool located on the side of my printer and wanted to mount the BigTreeTech Smart Filament Sensor V2 right…
There are several of these AirTag mounts out there, but this is my betterer take on it. It's lower profile than some, no sharp edges to bother the animal, zero hardware, low / no snag, and designed to be made from TPU for resilience.…
This is a couple variations on a stand for a set of six small screwdrivers. It will work for most any screwdriver that will be held in a 6mm diameter, 30mm deep hole but I made it for my set of Kwong Yuen watchmaker screwdrivers. There…
A mount for the Fysetc H36 (Note: V1.3 with the molded cable only! V1.2 coming soon) toolhead board to attach it to the back of a Sherpa Mini extruder and provide strain relief and retention for the connectors. The strain relief is not on…
There are already about 6,000 of these, but I wanted one that was very compact, worked with standby mode on my iPhone 15 Pro Max (and likely all other magsafe phones), printed without support, and was simple aesthetically to not draw any…
Here is my take on a printable yo-yo. I wanted a butterfly style yo-yo with a bearing to allow for better spin. I designed this mostly for a metal 625 bearing—it will certainly work better that way—but if you don't have one handy, there…
This is a slim snap case for an RG405M to help it travel better inside a bag. It's intended to re-use the original packaging foam piece to protect the front face. Place the RG405m in the case, place the foam piece on top and apply a…
A small case to hold one extra SD card and an extra NP-W126S battery. I made this to ride along with my X100V but it would work with a variety of fuji cameras that use the NP-W126 series batteries. I printed in PETG with a 0.2mm layer…
I wanted a cover for my Anbernic RG35xx to protect it and make it a little easier to slide in and out of my bag. This cover is intended to re-use the insert that came in your original RG35XX H packaging, but if you're a normal person who…
A simple mount to store your eSun vacuum pump and get it off your desk. I include a hanger so that you can mount it to your IKEA Skadis pegboard. I designed the dimensions around an eSun pump but as you would imagine it will hold anything…
After printing the hexibase micro t-line speakers I noticed echoing when listening to spoken content. Covering the port stops the echo sound but also makes the speaker sound worse. This muffler seems to improve the echo without totally…
I had a bunch of small command strips and no hooks. Here's a super quick printable wall hook that fits a small 3M command strip. Scale as needed for different size strips. Most of the other ones on here require supports or need to be…
I like surplus hardware for my mini-homelab and when I wanted to add some additional disks to my Z440, I used these adapters to add them to my 5.25 inch bays. SMART promptly told me they were undercooled and I needed to do something about…
I wanted a way to hang my Engineer Solder Sucker from my Skadis pegboard. This design is nice once it's done and printed, but it's not one of those clever unsupported models. See the images (or the 3mf) to see how I oriented it for…
The ACM deck panel used in the Formbot Voron 2.4r2 kits is unacceptably sharp on the edges where the wires are fed through. These grommets will sit inside the holes and provide protection for your wiring. Let's play it safe and not have…
This is a super simple storage bin for the Metric Bolt Measuring Jig by @snympi. It has two open rectangles on the back that can be used to attach it to whatever you come up with but I use the Skadis hangers to attach it to my IKEA…
A version of the great Sturdy Handles by Jeoje, but without the holes… unholey if you will.
I am tired of my kids borrowing my baking sheets for their lego builds so I made them this parts tray for their lego builds. It has rounded interior corners to help grab parts and a tapered design that makes them stackable. The text is a…
My kids named my car and I wanted to make some license plate frames to so that the rest of the world will know how to address her. So I designed a license plate frame for standard USA license plates (6x12 inches). Slicers have gotten…
A slightly shorter DS cartridge dummy to keep the port clean
I like my decontaminator setup on my trident, but I don't want to use brass brushes anymore. I find the silicone ones to be way more effective. This is a single part change of the decontaminator setup to just make that single change. The…
The perfect, infallible decision making tool so long as your question needs a yes or no answer. I printed in PLA with 0.2mm layer heights with whatever profile my slicer was already set to, really anything should work. Scale up or down as…
This is a desktop pencil and pen organizer based on a design seen on the desk in Ati's Room in the Gropius House designed by Walter Gropius, the founder of the Bauhaus School.
Introduction There are a few of these, but this is my Version 2 take on a very simple fume extractor for soldering on your workbench. It's designed to use cheap and available Hakka A1001 style filters without paying for the more expensive…
This is the classic ElPoPo removable hinges doors, but adjusted so that a 3mm panel can be used with 1mm foam tape the original assumes 3mm foam. Blender file with the adjustments included.
I found another carrier on thingiverse that does nearly the same thing, but did not conform to standard 2.5 inch drive sizes , so I created my own here. There are probably others that will work with an HP carrier, but I wasn't certain and…
There are already oodles of Steam Deck stands, but many (or all?) of them have unneeded, complicated features or unsupported overhangs or not ideal print orientations. Load up that last little bit of material on a spool somewhere and…
These are all currently available results.
