Counting matching models…
For the Ender 3 V2 Neo and Sprite Pro. First print the SpriteProHouse file properly oriented or using the gcode files provided, with a printer that's working. If using PLA and the gcode files, drop the temperature to 215 and the speed to…
I needed it enclosed. The hole fits a standard pen for winding. And I beefed it up a little.
I over engendered this trolley; so it’s quite tough and doesn’t require thick walls or infill for printing… The model requires three 608-ZRS bearings and three pins to be printed. It mates to a 18.1mm conduit pipe. I recommend printing…
Allows you to look around like a DJI and simply enjoy the view. Best addition to this drone I've made by far. It's a rear mounted camera with servo tilt control. Fits the OEM Cat and other similar size cameras. Requires a 9g servo and…
Works for any 2.5" - 2.75" diameter tubing or vacuum attachments. I recommend printing at least two clips for any vertically mounted lengths of tubing. Please comment for any other file formats. Thanks
Provides a place to add attachments to the Core of the Lowrider V4. Like a drag chain or vacuum tube mount.
Use with 2.5" vacuum dust collection tubing. Works with 2.25" keyed and 2" circular vacuum inlets. Recommended use with: Vacmaster 6 Gallon 3 hp Wet Dry Vac.
Some files will need reoriented for printing. The ButterFly heads are tight and may require a haircut to fit the neck joint smoothly. Layer print height at .1mm for best results and tee supports Recommended for some prints. Thanks!
Adds a mount for a drag chain for the Lowrider V4. Available in two heights for 1" and one height for 40mm. Requires "Lowrider 4 V4 Core Accessory V Slot" 40mm drag chain mount made to fit Doug Joseph's…
Elevates your work for a better painting experience. One design is for the bottom stack and to hang off a Peg Board.
Three rotationally adjustable tramming shims. One large 2.25mm, Medium 1.7mm, and Small 1.2mm. K, It’s kind of a pain to adjusting the tram on the LR3 so… Print two Core straps of your choice along with two each of each size of shim.…
Magnet removable dust boot for the Lowrider V3 CNC with removable TPU brushes. Fits 2.5" vac tube. Requires 4-10x 8mmx2mm neodymium magnets. Only requires the upper top 4x magnets to work. The file was designed with its own supports,…
Helps to prevent things from getting sucked into the belt drive and blocks debris from entering the front of the Y Axis stepper.
Will need to use tree supports and for printing the inside wings and the wing joints.
Wing Joint will need tree supports for printing.
Use to examine belt pressures over time or to equalize duel belt pressures. Due to the variations of belt length, readings do not represent pounds per inch of belt tension. Readings from 1.5mm to 10mm at Max pressure. Use with or without…
This is a simple TPU printed weather shield that helps prevent rusting of the camera’s mounting bracket. There are two models: one’s flat faced and the other has a small light visor. They require one small zip-tie to lock in place. Print…
This is a simple antenna shield and mount for the R9MM Immortal T antenna to the Arris Hobby E280 7" drone. But a few Zip-Ties will fasten the mount to any drone. The TPU printed antenna shield will require a few zip-ties to secure…
The solid body model works well but may scratch some paints. So, V2 is a multi material assembly of TPU and PLA+ utilizing the original design platform. Reducing sharp impacts and paint abrasion. Lol, or something like that.
Adjustable CNC drag pen for ER20 collets. With pen or Sharpie marker sleeve. To center: insert a flat substrate into the pocket and rotate pen sleeve until contact. Requires one 12mm x 3mm spring. Spring can be found under the gas lever…
Cat 13 or Devil 13
Fits drag chains up to 33mm and 1" wire sheath. **REQUIRES** Doug Josephs initial drag chain/Lowrider 3 mount.
Wing joins will need tree supports to print. NOTE: Print the wings at .1mm print height. Use yellow filament for the first two layers hen switch to orange for the next 6 layers then switch to black. Or paint it, I don't care. What ever, U…
Zip-Tie protection with a little bit of TPU too. And the nail polish to match.
Drops the belt out of the way and applies some additional down force. Can be used to square CNC when aligned to SBR20 rail ends. Can be used with or without SBR20 rails. "Y Max SBR20" will need supports when printing. Does not play well…
The original TPU bumpers I made appeared to stopped her to fast and odd things down the line broke like solder connections and LEDs. So, I made these to slow the impact down. Using 1" pipe insulation, cut to .5" and pressed into the wings…
Quick access CNC bit organizer.
A dust boot that allows you to access your collet with one hand. With a dust skirt directed inward for better suction around the bit. Models may need reoriented for printing. If using pla: lower the temperature to 210 and speed down by…
A simple TPU printed removable arm bumper for the Arris Chameleon. With holes for an 11" Zip-Tie to bind the arms together. This helps to prevent the arms from breaking backwards during a crash and are easily replaceable if damaged. And a…
I recommend printing the one file given or use supports. This model REQUIRES plastic coated wires for their stiffness. Silicone wires are to pliable and don't preform well. Install servo, turn on servo and go to max and install the gear…
These were originally resin printed but work good with extrusion printing if oriented properly. There's a mute for the buzzer, two ESC Shields, and Friggen LED Eyes Babby'Ya! Lol
Guide wheels to help the process of lifting, removing, and steering large substrates from ground to table. Helps prevent scratches to substrate. Requires one 608-2RS Bearing.
You can push a car on wheels sideways, but you can't push a train on rails sideways at all. This mod doubles the Y axis pole to be on both sides. +REQUIRES+ TWO "yz_plate_max" one mirrored and two Aluminum YZ Plates
Zip Tie your M10Q 180 anywhere you want or use the 2" or 2.5" hollowed out tower, for cable management, to mount away from electronics. M10Q 180 mount features a window for the GPS indicator light. WOW! The tower works to protect the…
A wall mounted bracket for the, https://www.printables.com/model/20915-full-graphic-smart-controller-case, that allows the controller to be stored and easily removed for use. No supports required but files may need to be oriented for…
If your table is Square and you're running two pols for the Y axis, mount the pole flush to the print and the print flush to the table. Mount one pole bracket, push the cnc gantry up/down the entire length aligning pols parallel. Return…
For V3 Lowriders that have their electronics mounted off the gantry and are running a towline for cable management. For up to 1" cord protective wraps. Requires a flat plane to mount to.
Finally a simple hands free surface touch probe for any CNC that requires conductive probing. Requires 3x 3mmx40mm springs and any conductive surface up to 1.125" wide. I sourced the springs from 3x discarded cigarette lighters, the flint…
A table mounted touch probe that accommodates bits up to .25" and V-bits up to 3/8". Not recommended for .5"+ surfacing bits. Requires a .4mm conductive surface and construction of a wire cage. I used the V1 Engineering .4mm touch plate…
Simple top plate antenna mounts for R9mm and Foxeer Pagoda.
Mounts half of a standard set of 12x ER20 collets.
Magnetic tape measure adapter. The front clip sits at 2". The tape Back is 2.5" wide. Sitting a 12' tape measure flush to the front. And sits a 16' tape measure flush to the back and .25" over the front end for a 2.75" total width. Tested…
Removable drone Light kit for standoffs at 25mm and 32mm. Reversible mounting for +-15 degree light tilt. With one light housing for the Arris E280 drone.
Organize your CNC bits where ever needed.
These are all currently available results.
