Counting matching models…
I stretched the duck width-wise to make it wider and more stable in the water. I think it also looks better this way since most rubber ducks I've seen are quite wide and look almost round from above. The attached 3mf file is prepped with…
This modular display system was inspired by the Minifigure Display by AJsRaceway on Thingiverse. I redesigned it for 1:64 scale cars, and added a few specialty modules for large vehicles and mounting hardware. UPDATE: Version 2 is now…
Print instructions If you don't want to cut the main body the way I did, I've uploaded a solid version that you can cut any way you like. UPDATE - 2022-11-21: I've added an upgraded version 2! It has more detail in the handle and adjusted…
Remixed from a variety of sources. See links below. I scaled and modified each model to work with my universal post adapter. Print a universal post adapter for each model and glue the dovetail joint before painting. The paint and primer I…
I used Blender to stitch together the sections of the tower and scale the whole thing to 200mm tall. I also decimated the mesh because it was too dense for a model that scale, but it's still fine enough to look good printed in resin.…
Life-size model of Lumiere. Holds two tea candles in his "hands". Modeled from scratch using Blender. Note: His hands are not identical. If one hand seems to sit higher on its arm, then try swapping with the other hand.
This is a 3D scan of a rock, taken with an EinScan SE desktop scanner. The original rock is about 50mm in diameter. I decided to make the scan because the I thought the rock would look good at different scales due to the fine details and…
Modeled with a combination of SolidWorks and Blender. The pieces print without support (except the deflector dish), and the latest version (3) can be assembled without glue. Use the included H-snap connector to join the major pieces. Use…
I remeshed the part and cleaned up the flat surfaces in Blender. Also added pockets to hide the tabs of Command strips.
Remixed from a variety of sources and made water tight for printing. King: Willis Tower Queen: Empire State Building Bishop: Chrysler Building Knight: Columbia Center Rook: Hearst Tower Pawn: KOIN Center Print instructions The gcode is…
This model is scaled to print as big as possible on my Prusa MK3, oriented diagonal on the print bed. In addition to the hull, you'll need to print two copies of the lower turret, and two copies of the upper turret. The turrets should fit…
I made this model for my daughter's second birthday. It has wheels, a fabric sail, and lashings on all the beams. it's sized to take up most of the bed on a Prusa XL, so you'll need to split or shrink for smaller printers. You'll need two…
10/26/2025 - Edit: Version 2 is now available. The feet extend further forward for better balance and movie accuracy, and the hat is now more accurate as well. The feet, beak, hat, and head are split off from the main body to minimize…
I really enjoyed working on this model of the galactic starcruiser Halcyon. I made it as a Christmas present for my father-in-law who recently went on one of the last voyages before the experience closed at Disney World. I added a lot of…
This is a high-resolution scan of a real alligator head from New Orleans, done on an EinScan SE 3D scanner.
I made this to go with the baby sword rattle by Targ . This baby shield rattle prints in separate pieces to minimize support. The four inserts contain the rattle medium and should be printed on edge with at least 4 perimeters and zero…
I created this model in Blender for a family Christmas activity and it was a big hit! Everyone got their own car and we built a regulation pinewood derby track to run them on. Unfortunately, the cars themselves are not regulation, since…
I designed this radiation shield to monitor the temp/humidity outside, together with a raspberry pi zero. Design is loosely based on this one , but I wanted to print the whole thing without metal hardware. You should only need zip ties to…
Scanned using EinScan SE desktop scanner. I did minimal post processing to clean up scanning artifacts, so you may have to split the models to suit your needs.
Sized for an adult, but can be scaled to fit anyone. Scale in x and y to fit your needs.
This is my remix of the fantastic model by Chris Kuhn and Josh Hooker. Long story short, I downloaded the SeaQuest model from Thingiverse (see model origin), but the author could not remember who the original designer was. While I was…
This model is a 3D scan with minimal cleanup. I'm posting the original scan so that users can decide how they want to split/trim the model for printing. Captured using an EinScan SE 3D scanner.
The numbers on the wheels represent the air gap in hundredths of a mm, so 25 = 0.25mm Use the included 3MF, because I painted the seams to keep them away from the gaps to be tested. I created the model in SolidWorks and exported at 2…
This model is a 3D scan with minimal cleanup. I'm posting the original scan so that users can decide how they want to split/trim the model for printing. Captured using an EinScan SE 3D scanner.
WWII Norden Bombsight for 1:16 scale RC B-17 I cut away the floor panel and adjusted the scale, as well as cleaned up the mesh for printing. Resin print pictured was done on Elegoo Mars at 100% scale. FDM print was done on MK3S at .07mm…
This is a high-definition scan of a river rock done on an EinScan SE. I needed it for a project and just thought I'd share. The diameter of the rock is about 6 inches. The scan resolution is probably overkill for most applications, so…
Remixed with helmet, shield, and halberd for defending your castle. Mirror in your slicer of choice to create an opposite-hand version. Use a ¼ inch dowel for the shaft of the halberd. Bottom of squirrel has a ½ inch hole for mounting.…
A simple color change after the base makes for cool results. Elevation data obtained here . Created using Qgis and HGT2STL .
Print the flat pieces and assemble your glider! Reference the .3mf file to see how I printed the tail and fuselage as one piece with different infill. SolidWorks file included for those who would like to remix. The glider flies ok. I…
This model is a 3D scan with minimal cleanup. I'm posting the original scan so that users can decide how they want to split/trim the model for printing. Captured using an EinScan SE 3D scanner.
This model prints with the lifeboats attached, and the gun turrets attach with no glue. Please use 1.75mm filament as the gun barrels. Be careful when scaling the model, or else the filament sticks won't fit properly.
I wanted a pikmin statue taskmaster trophy. This is the result.
This is a collection of small toy turtles that I scanned with my EinScan SE desktop 3D scanner. They're about 50mm long at original scale. Pictures are of the original toys. I haven't printed the scanned files. The models have had minimal…
This model is a 3D scan with minimal cleanup. I'm posting the original scan so that users can decide how they want to split/trim the model for printing. Captured using an EinScan SE 3D scanner.
This is a 3D scan of an ornamental carving on my bed frame, captured using a POP2 scanner. The scan was a little rough, so I smoothed and sharpened the model in Blender. I have not printed the model yet, but it has a flat bottom and…
I created this Jurassic Park logo specifically for multi-material printers. The pieces have zero gap and must be printed in place. I've included the original .blend file for your editing pleasure. Happy printing!
This model is a 3D scan with minimal cleanup. I'm posting the original scan so that users can decide how they want to split/trim the model for printing. Captured using an EinScan SE 3D scanner.
This model is a 3D scan with minimal cleanup. I'm posting the original scan so that users can decide how they want to split/trim the model for printing. Captured using an EinScan SE 3D scanner.
This model is a 3D scan with minimal cleanup. I'm posting the original scan so that users can decide how they want to split/trim the model for printing. Captured using an EinScan SE 3D scanner.
1:3000 scale (pictured print was scaled up) 30 Rockefeller Center New York, NY 10112
This model is a 3D scan with minimal cleanup. I'm posting the original scan so that users can decide how they want to split/trim the model for printing. Captured using an EinScan SE 3D scanner.
The models are designed such that the bottom surface represents sea level. Each model has the name of the mountain engraved on the bottom. I created the models with QGIS and HGT2STL, then did some finishing work in Blender.
I designed this tool to easily find the center of a disc, up to 200mm diameter. The diagonal edge is offset by 0.35mm so that 0.7mm pencil lead should be exactly on center. Simply scribe a line on the disc, rotate the disc roughly 90…
Starcraft-inspired Christmas tree ornaments
These are the number tiles I made for our baby's monthly photoshoots. The set includes a bonus 9¾ month tile for those of you who want to do a Hogwarts house photo. :-) Simply add a color change at the base of the numbers and you're good…
Trimmed down the text a little bit because it was too tall and made it difficult to use the switch. Add a color change at the text and you're good to go! Requires support on inside of cover.
I haven't tested this model yet, so any feedback is appreciated. Designed for 13mm (½ inch) marbles or bearings. Support contact distance is set to 0 for permanent attachment.
These are some awesome marvel drink coasters that I remixed from SJThreeD. I wanted to make some adjustments for printing in multi color on my Original Prusa XL (changes outlined in “Differences” section). Happy printing!
This model is a 3D scan with minimal cleanup. I'm posting the original scan so that users can decide how they want to split/trim the model for printing. Captured using an EinScan SE 3D scanner.
Model of Mount St. Helens made from elevation data. The vertical scale is slightly exaggerated to make the terrain a bit more interesting. This model features an internal "lava chamber" which can be filled with baking soda and vinegar. If…
Made this boat for my skipper friends. I don't know if it floats, but I'm guessing probably not. To print, make one of each file, plus a second smoke stack half. Glue it all together and you're done! Be careful when bending the railing so…
From the board game RoboRally. Modeled from scratch in Blender. Print instructions Tilt back 45 degrees for best results.
This model is a 3D scan with minimal cleanup. I'm posting the original scan so that users can decide how they want to split/trim the model for printing. Captured using an EinScan SE 3D scanner.
This is my remix of the Octo Compass by Pchelkaa. See differences section for detailed changes. Long story short, I made it smaller and changed lots of things to make it print nicely on a multi-color printer. I also did away with the…
This model doesn't need to look good up close, because it's intended to be printed very very small (about 7mm tall.) I scaled the model to about 1:72, which is the same as the figures in the Micro Galaxy Squadron lineup. To print at this…
I took a 3D scan of this broken piece from my tripod and did some post-processing in Blender. The result works great and I've been using it ever since! Captured on EinScan SE desktop scanner.
The Troll Wall is the tallest vertical rock face in Europe, about 1,100 meters (3,600 ft) from its base to the summit of its highest point.
Terrain cutout represents an 8km square centered on the peak. Vertical scaling is approximately accurate. Created using elevation data from terrain.party. Model created with HGT2STL and cleaned up with Blender. Easy to print and fun to…
A decorative storage box for your Harry Potter Quidditch card game.
This is a replacement small token for Lost Cities the board game. I was inspired to model it after my dog ate one of the wooden explorers. Easy to print, but good luck matching the color!
Tallest mountain in Norway. Print instructions Tear off corner ears after printing.
This model relies on a friction fit to assemble, so make sure you do a fit-check before printing a bunch of plates. If the parts are too loose or too tight, adjust your x-y compensation to make the pieces fit together snugly. For the…
These are all currently available results.
