Counting matching models…
Just snap the lid onto the top of the container. Use TPU filament to print. It helps keeps the powder dry and in the can, not trapped between the top of the can and the lid.
This box can be use to hold fishing flys, streamers or almost anything. Glue a foam pad to the inside surface to stick the flys to or print some of the hook holders and glue them in place. Print the hook holders out of TPU flexible…
This holster fits a Springfield Hellcat pistol in 9mm and is intended to be mounted under a desk or table. I suggest printing it in a vertical orientation with only the muzzle end of the mounting bracket on the build plate. Requires 2…
Aids in loading a 9mm magazine. It fits the magazine from an Sig P365 and may fit several other magazines of similar size. It has no moving parts. It's not as fast as commercial loaders, but it definitely works. The opening in the loader…
This fishing bobber (or indicator) is about .75" in diameter. With the nut at the top of the threaded shaft, inset the line or leader into the slot, then tighten the nut down on the line. To adjust the bobber to fish at a different depth,…
It really amplifies the sound from most cell phone. When printing, orient it to minimize supports. The cell phone opening is 89mm x 15mm. 8-17-2025: Added a version that requires less supports and exposes more of the phone's screen.
A fly fishing popper that's about 1" (25mm) long. It features flats for placing eyes, a tunnel for inserting rubber legs and a groove for aligning the hook. I recommend a 2 layer wall, 0.2mm layer height and coating with fingernail…
This tripod was designed to hold any cellphone, but could be used with a variety of items. The height of the tripod is controlled by the lengths of the various ½" PVC tubing that you decide to use. I preferred to make the rounded feet out…
This Poop Scoop is intended to be used with a plastic similar to those used at most stores. Insert the Poop Scoop Extension into the Poop Scoop Body and glue in place. Insert the Poop Scoop Handle into the Poop Scoop Extension and glue in…
A hook for clothes or bags that fits over the top of a door. The opening for the door is 35mm wide and its overall length is about 275 mm. I printed it lying on its side, with PLA, at .3mm layer height. Be sure to use a brim to avoid it…
A handle that is attached to the underside of a toilet seat via double sided foam tape. The handle avoids having to tough the frequently filthy underside of the toilet seat. One handle is made for seats with a flat underside and one for…
This trap tips when the mouse walks to the end of the plank to eat the bait. It also automatically resets due to a counterbalance. A magnet, along with an adjustable bolt, enables the weight required to tip the plank to be fine tuned.…
Holds a mop or broom close to a wall. Grips handles about 7/8" (22mm) or less in diameter. Requires 2 flathead screws.
An attachment for a vacuum cleaner. Notches in the lip of the attachment allow it to bring in nearby debris and also helps prevent it sticking to the vacuumed surface. End diameter is 38.5mm (1.52") and tapers up to 40.5mm (1.59").
A simple box with a flexible hinge that can, to a limit, be scaled up or down in your slicer to various sizes. Make the body with PETG and the hinge from TPU. Other combination of filaments usually do not work. I recommend using “snug” or…
A sign that points to where deliveries are to b placed. Use any filament that can tolerate outside conditions. I used 2 colors of PETG and glued it to the door.
A cartridge box that hold 50 loaded or empty rounds. The openings are 14 x14 x 34mm deep. The case with the lid has overall dimensions of 155 x 80 x 78mm tall. The lid snaps onto the lower case.
Intended to seal the tubing coming from a filament dryer to prevent humidity entering the dryer. Just press it onto the end of the tubing.
This upper grip is for a fishing rod blank. I used it on a 7wt. switch rod blank as a substitute for expensive cork grips. It has a tapered internal diameter of 9.16 to 10.08 mm and a maximum outer diameter of 70 mm. It features a thumb…
The set of trays (partitions / dividers) are designed to fit a drawer in the 12"x12" Sterilite 3 drawer cabinet. They help to separate and organize the contents of the drawers. A pair of trays occupy the front half of a drawer. The trays…
These are all currently available results.
