Counting matching models…
Model of a B-Series VTEC valve cover, not much else to say. The model will probably load way far away from the build plate for some reason, just right click and select auto arrange models if you are using cura. Resize the model to however…
Spool holder for the Flashforge AD5X inspired by the great "Filler" spool holder. I was originally going to just modify the filler, but found that there were no .step files for the parts I needed to modify, so I just started from scratch.…
Vice: Full disclosure, I did not design the vice. It was an existing design by TheGoofy on Thingiverse. He has a whole bunch of awesome designs and I highly recommend you check them out. That being said I used it to base my jaw designs…
Non printed parts consist of four 608 bearings (skateboard / fidget spinner / etc…) Use supports for rollers. I printed at 0.6mm line width on a 0.4mm nozzle on my Ender 3 pro.
This gives you a way to mount any discrete GPU to your skadis pegboard. I have had my old XFX R7970 on display above my desk with this for approximately 2 years with no issue. You will need two M4 screws and nuts. I recommend gluing the…
2GT 20T Pully with 5mm bore that I optimized to be printed and use M3 heatset inserts. Highly recommend printing in ABS or better. Additional parts needed per pully: M3 grub screws (x2). M3 heatset inserts (x2).
This one is takes up 1x2 squares on the gridfinity baseplates and holds: Two sharpie markers (Added provisions to store them tip down for the metallic ones). A ballpoint pen. One lighter and some cotton swabs, or two lighters. And two old…
Keyboard plate for a 60 percent keyboard using standard layout. 2mm thickness. The other plates I found online did not have enough clearance for the stabs which caused the PCB to warp when installed. I used KLE to generate the initial…
Collection of mounts designed to store / display flashlights on an Ikea Skadis pegboard. I will update this page with new designs as I get new flashlights. If you want to find out more about the flashlights these holders are designed for…
Description: Casing cushion inspired by the Bergeon gel style cushions. This one is way cheaper and does the job surprisingly well. Printing: I printed the base and clamp rings in PETg and the cushion in Sainsmart 92A TPU. I recommend…
Motor panel to replace the stock acrylic one. This one has arrangements made for a ptfe passthrough and M12 cable gland, I got some from Fabreeko.
Designed to test multiple EM / Flow rate scenarios in a single quick print that doesn't use any unnecessary filament. I have been working on transitioning over to PS as my primary slicer and therefore have been retuning all of my many…
Pebblebee clip mockup for use in designing cases and such. 1:1 model. I made a simple jig and used this model to cut out a cavity, in which my pebblebee clip fit easily, yet snug. I recommend printing a test jig to see if you will need to…
Holds 4 bottles of BSI super glue. Print with the bottom on the build plate and use supports for the hooks.
Allows you install a Revo-CR in the Zero-G EVA toolhead. I'm scrapping my Ender 2 pro to use as many parts as possible on my custom 180x180 Mercury One.1 MINI build. I couldn't find an adapter to fit the Revo-CR to the EVA toolhead to I…
These work better than you might think, I just modified them to work with 3mm foam tape gaskets. They are very easy to get on and off and hold nice and secure. They probably don't add any rigidity to the frame, but they work well to hold…
If they can keep your PC cool, they should work to keep your v0 cool, right? I'm running a Fysetc Spider which has integrated 12v fan outputs (MAKE SURE YOU USE THE RIGHT JUMPER). You could also achieve the same results with a cheap buck…
I really liked the original design by theone but I wanted to simplify the printing and assembly process. I implemented a captured nut and got rid of the knob that went around the head of the M3 bolt. I also removed the protrusion on one…
Holds one 2oz. bottle of Insta set onto an Ikea Skadis pegboard. I printed in PETg. Use supports for hook.
Allows the hero me gen 7 toolhead to be used on the sv04 idex printer. I have installed this system with a BMG using the oroginal sv04 stepper and blower on T0. I have not installed it on T1 yet so if you try it and have any problems…
Print vertical with organic supports. I printed it in PETg.
This is a sort of all in one hotend shroud solution for the ender 2 pro. I remixed the bltouch mount and hotend cooling fan brackets from the linked models, and designed the adjustable part cooling fan mount myself so that I can lower the…
Holds your Bondus hex wrenches to your pegboard. I printed in PLA and it's been working fine. It's a bit of a tight fit but they slide in fine for me.
Holds a 3x5" notepad and pen comfortably. I used 4 multipoints so it doesn't wiggle around.
This is designed to allow a slide-through style PTFE fitting to screw right into the top, and then slide the PTFE tube down through and directly down onto the top of the dragon. It should be aligned so that when feeding filament into the…
Description: Simple but sturdy stand to hold your S4+ upright and save desk space. Printing: Orient each piece so that the largest flat surface is touching the build plate. I printed mine in PETg but any material should work fine. I would…
Mold for casting a sock for the Revo-HT heaterblock using Permatex Gold Exhaust gasket RTV. BOM: - M3x20 (or longer) x4 - M3x12(ish) x 10 - High temp RTV (I used Permatex Ultra Copper exhaust manifold gasket maker). - Cup or bowl. - Blue…
ProtoXtruder mod which replaces one of the HGX lite drive gears with a 6701ZZ bearing as an idler. This significantly improves the performance with flexible filaments, notably SyriaTech 85a TPU. Before this mod, I tried all of the popular…
I built this as an alternative to buying the official flashing kit from Hank. I had everything I needed already so it cost me nothing and it works as intended. Please see the README for list of materials and tools needed as well as…
You will need to separate the two halves of the ultraflow which will give you two separate fan units which are wired together. More details to come…
Use this to easily mark where you should drill the mounting holes for the PSU on your Voron v0. Not much else to say here. Oh, just make sure you have it oriented the right way before marking your holes, unless you want to mount the PSU…
I designed this case to keep my 26800 cells safe. The screw top does a good job of not accidentally opening and the tabs keep it from rolling off your desk or table. I printed this in PETg with a 0.4mm nozzle. PLA will work too of course.…
I have always loved the look (and function) of the dragon hotends. I have a spare sitting in my parts bin just in case I needed to replace the H2 on my ender 5, so I decided to add it to my hotend collection on the Skadis behind my desk.…
Compact storage / display solution for your nice Fabreeko Driver set. Will probably work for other generic sets too. Print standing upright, you shouldn't need supports. Depending on your bed adhesion, a brim may be helpful.
Stock 8db antenna cover plate .stp files for designing custom antenna mounts. It took me some searching to find this file online and actually had to download it from the description of a YouTube video, So I thought I'd upload it here with…
I love the split flap clock by AlexY, and the beautiful case for it by Jacob Lightfoot, so I designed this shelf so I could attach it to a pegboard. I printed it in ABS, PLA would probably be fine but the clock has some weight to it so I…
Description: Convert your light panel into a high CRI desk light and never have to worry about the battery dying in the middle of a project. I love the quality of light produced by my YiaMia light panels that I picked up on amazon back…
Quick and dirty mock up I threw together of the much anticipated Emisar DM11 from Hank Wang. I mostly just wanted to get a feel for how pocketable this one will be, it'll also give my kids something new to play with. The dimensions are…
I modified it so that you can use a standard M4-SHCS without having to cut the head off. I secured it with some CA. I also used on of those nuts with the big flat head like the sexbolt uses (Can't think of the name right now), although…
Hotpoint model#: (Model with one button). These wheels solve the problem of the bottom rack falling off track and getting stuck. I recommend printing them in ABD, ASA, or PET as a minimum, although PETg might work too. These are a direct…
These are all currently available results.
