Counting matching models…
Updated to avoid potential infringement with patent application US 20220118600 A1 Hook-style wall mount for small to medium chainsaws. I'm using it for the Dewalt Flexvolt 16" Cordless Chainsaw. Print with a large layer height and…
An angular speaker enclosure for 3 in speaker drivers. Printed in two pieces, top/front, and bottom/back. Then sealed together with epoxy after the speaker and binding posts are mounted internally. The internal of the enclosure features…
Simple twisted cabinet knob. Intended to be printed in stainless steel filament from Proto-Pasta: ( http://www.proto-pasta.com/collections/retail/products/stainless-steel-pla ) These knobs along with my modern drawer handle model:…
**UPDATED TO INCLUDE VENTILATION SLOTS Since Yeti keeps running out of stock for their MagSlider replacements, I decided to model up my own. This part is a direct replacement for the slider on your Yeti cups that keeps flying off and…
General Info We have cameras that allow us to monitor our pond and our beehives, both of which are in a field with no suitable structures to mount a camera. This bracket was designed to accommodate both the camera mount as well as the…
This is a simple mounting adapter designed to mount a Baseus 65W Battery to the dbrand Steam Deck Killswitch case. The battery is fitted to the mount using a simple friction fit and the mount attaches to the Killswitch using dbrand's…
General Info We wanted to wall mount a tablet in our family room area to act as a hub for the smart home control using Home Assistant dashboards. This mount was designed to screw directly to a 3 gang wall box so we would have a solid…
A bumper-style case for a Toyota Sequoia key fob to fix a broken keychain hole and prevent future damage. Once assembled, the M3 machine screw used to clamp the case around the key fob can be used as a new keychain hole. Category:…
Remix of this well designed case https://www.thingiverse.com/thing:4729713 by mak0t0san to fit a slightly larger battery, a small slide switch, and some extra room for a GPS module. I'm using this case as a TTN Mapper, along with code…
Simple remix of MisterMcDuck's Raspberry Pi Zero case for the MakerSpot USB Hub. My RPI0 already has a GPIO header soldered on already, so I punched a hole in the case to allow them to pass through. Great enclosure, thank you for doing…
General Info This shoulder strap is designed to accomodate a DeWalt cordless wheed whacker, but would likely work with any standard size weed wheed whacker or edge trimmer. The two halves of the clamp attach with M5 hardware (be careful…
This is an automatic winding machine for coiling up small cords, strings or wire. We needed a way to reliably coil up specific lengths of cord for sale in a kit. This machine is the updated version of my original Automatic Winding…
I'm using this for holding tiny screws for glasses and watch repair. These compartments are still far too large for these tiny parts, but there is a reasonable limit for getting a finger into the compartment for fishing out a screw. I had…
General Info I set out to solve the problem my brother was facing with his kegerator of wanting to display the kind of beer currently in the keg without leaving a cap out or creating labels. Thanks to the Waveshare 2.7inch Passive…
General Info We live in an area that frequently sees high winds, and has several outdoor boxes for storage and for package pickup and delivery. I designed this part to solve the problem of needing the boxes to be latched closed when not…
General Info These parts are designed to accommodate a small addressable LED ring light, mounted on a pedestal in the center that keeps it free of moisture. The design is intended to shed water incoming from above, and allow any…
Simple replacement knob for a attic or whole house fan timer switch. Knob dimensions, including attachment post size and shape, can be easily modified by editing the first sketch in the Fusion 360 file. Category: Replacement Parts
I needed a way to store CR2032 and CR2450 coin cell batteries in our battery organizer for all the smart home sensors. I designed these little D-Cell size coin cell battery trays to make some of the unnecessary slots in the organizer…
Simple adapter to fit an 40mm fan in a standard 2in schedule 40 PVC pipe. Category: Electronics
NEW VERSION AVAILABLE! V2 => https://www.printables.com/model/157130-automatic-winding-machine-v21 This is an automatic winding machine for coiling up small cords, strings or wire. We needed a way to reliably coil up specific lengths of…
Replacement forward lean block for a snowboard binding to replace a worn out and damaged part. Based on the worn out part taken off a pair of Union Bindings. Instructions Print standing up on the flat end at 100% or 70% fill. The teeth…
General Info Our son (1 year old) loves to click and press tactile things, so this box was made to house an arcade button and simply increment a counter every time it is pressed. The total count is stored in EEPROM for data persistence…
A tiny spool (slightly larger than a household bobbin) that can be easily printed without supports. The spools are printed in two pieces that interlock and are retained closed with an M3 screw and nut. You can also simply glue the two…
This machine is designed to automatically measure, mark key locations, and then cut webbing or cord for production purposes. These files are provided as is, the model was assembled and tested to be working properly, and the firmware was…
General Info Fed up with leaky bottle adapters available on Amazon, and not willing to use the disposable version provided by Enfamil themselves (sold separately to add insult to injury), I designed this simple adapter part. Compared to…
In my struggle to contain the wire and visual mess of my Kossel Mini printers, I designed this base. **Version 2 Features: -Separate side panels for easy maintenance -Smaller corner pieces for faster printing and less wasted material…
A simple cooler to force air through a Phantom 4 Pro battery. In my testing, this cooler will take a hot post-flight battery to cool enough to charge in about 1 minute if the ambient temperature is around 75-80 degrees Fahrenheit. It is…
Simple mount for the cheap (but very useful) First Alert AF400 Tundra Fire Extinguishing Aerosol Spray cans that can be found in many places, amazon link below: https://amzn.to/3UasHcV This mount allows you to create an easy-access home…
This part replaces the small plastic retainer that stops the check valve ball from traveling up the beer outlet tube on a kegerator beer coupler. Evidently, these parts are way over the top expensive ($8 for a dime size part...) so after…
Magnetic detachable window blinds cord hanger. Keeps the cord from your blinds up off the ground for child proofing, robot vacuums, or whatever other reason you want cords to be managed and up out of the way. I designed these to replace…
Peg with two holes that fit's into the top rail slots on a Grizzly Wagon for gardens. Allows the use of ropes, or bungee cords to secure things in the wagon. Print Settings Supports: No Resolution: Any Filament: Any PETG Category: Outdoor…
General Info This was built to solve two problems I had with our existing pond pumphouse setup, noise and fluctuating water levels. Our pumphouse is situated in a floodplain that has a raising and lowering water level, occasionally this…
Enclosure for the small stereo amp kit sold by Sparkfun ( https://www.sparkfun.com/products/9612 ). This enclosure also includes space and cutouts for an external power switch, RCA audio-in jacks, a power jack and a 4 spring speaker…
The fans in my Powerextra triple charger for DJI Phantom 4 Pro batteries started to fail, and was frankly not sufficient for safe cooling to begin with. Link below to the exact item I have, though I suspect any of the same looking blue…
This version is outdated, please check out version 2 by clicking the remix above or by following this link: https://www.printables.com/model/157149-kossel-mini-hexagonal-base-v2 In my struggle to contain the wire and visual mess of my…
B'Struder Remix. As I am using this attached to one of the vertical 2020 extrusions on my machines, I wanted to have little angle on the plate so the bowden tube is angled away from the carriages. This keeps the bowden (and on my machine,…
I was having trouble getting my printer to resume correctly after a pause (would start about .5 mm off in the y axis) so I modified the mount so I could just drop in a nut after the print was finished. You will want to glue the nut in to…
These are all currently available results.
