Counting matching models…
Very simple, lightweight, inexpensive AirTag keychain clip. Just 0.5m of filament. I recommend PETG and printing with 0.2mm layer height. Print without supports. (thicker version added) (thicker version with smaller hole added)
EN It's my about 3 year old model. A while ago I was taking it out of the bath after my daughter got out of it, so I thought other kids might like it too. Our little one still likes the ladybug very much (I had to print three pieces so…
EN: Simple carabiner with safety lock against opening and slipping out in three sizes. It is a plastic product - it cannot be used instead of a real metal carabiner! Rather suitable for hanging toys to a baby stroller etc. CZ: Jednoduchá…
This is a modification of another model by @AndrewDeml_310771 where I shrunk the edges to make the fidget more comfortable in the hand but mainly modified the holder/cage for the gears so that it can be printed without supports. I…
EN It's about two years old construction of mine. After seeing several solutions to the same problem here, I was moved to post my version. For this design of mine, I would highlight the minimal size, hidden screws and the battery…
EN: Prusa Protective Face Shield punching and rounding template for visor. It is based on the dimensions given here:…
(EN): Learning clock for children (cca. 10 x 2 cm). CZ: Výukové hodiny pro děti, se spřaženými ručičkami hodin a minut (cca. 10 x 2 cm). Print instructions (EN): Better to print with different colors for different parts (at least the dial…
EN: This two-piece enclosure/case is designed to protect the development board against short circuits and mechanical damage. The enclosure has minimal dimensions – it fits the board very tightly. It is intended for a bare board (without…
Tisknul jsem z černého TPU. Jelikož jde o náhradu gumového “proužku”, je nutné použít flexibilní filament. Pro maximální pevnost jsem tisknul se sedmi perimetry - čímž jsem jednak eliminoval nutnost řešit infill a “druhak” jsou všechny…
EN Handle for Siemens EQ6 Coffee Machine Water Tank The brief and basis for this project was a "handle" with one end broken off. I measured and considered how to design a model that has "no flat surfaces" – it's a truly complex shape. By…
EN: It is printed from TPU and to make the foot really soft (and to dampen shocks as much as possible), I printed without infill and only with two perimeters (0.4 mm nozzle, 0.2 mm layer). The shape of the foot should still hold the…
EN I recently played Moon Patrol on my old Atari and got the goofy idea to make a model of that moon rover. Before designing it, I searched the web to see how the rover used to be displayed (the game was not only for Atari) and besides…
EN Spare strap for CASIO DB36-1AV watch. Over time, the original rubber strap became worn, hardened and broke, so I redrew and printed it. The principle of printing in layers resulted in a slightly different surface pattern, but no harm…
EN: Hook for hanging a squeegee in a shower enclosure. Designed to hang on an 8mm thick glass side panel. The model is made to hold firmly in place - it has pre-tensioned grippers - and needs to be pressed onto the edge of the side panel…
EN: Very lightweight design for fan mounting with good heat dissipation from the heat sink and good filament cooling routing. No new parts are required for replacement - the original fans are used, they just snap into the new…
Já tisknul PETG na standardní nastavení, ale myslím, že materiál může být použitý jakýkoli. Tiskl jsem 0.4 tryskou a 0.4mm šířkou stopy - stěna je tlustá 0.8mm.
CZ: Náhrada vnitřní plastové části/těla dveřního kování Rostex R1 (rozetč 90mm). Při pokusu o dotažení uvolněného kování se mi začaly sypat zpod kování drobné úlomky. Po demontáži se ukázalo, že celá plastová vložka/tělo je kompletně…
EN: Not much to add to the name - pentominoes in two sizes - with 2cm and 1.5cm module (20x12cm and 15x9cm). The larger one is more for gingerbread, the smaller one for linzer. Unfortunately, I didn't have time to test it - before the…
EN For reasonable printability, this end plug/cap does not have fins perpendicular to the axis (which, besides functioning as fixation in place, would also prevent water ingress), but has them parallel to the axis. I recommend using PETG…
These are all currently available results.
