Counting matching models…
It works best printed at 0.2mm layer height (the thread is a bit tight if you print it at 0.3mm). Be sure to print the lid with the top facing the bed to avoid supports. The pot has a small flange that helps it stay in a Prusament spool,…
A parametric switch tester for choc switches. You can customise the number of switches it will hold using the User Parameters function in Fusion360 and create your own STL (although 3x3 and 3x5 STLs are included for convenience). FYI the…
A tool to remove and replace mirrors and sometimes lenses in K40 or similar laser cutters that use 20mm fittings. You'll need two M2 screws at least 6mm in length (but longer ones work). It's set up so you can use a 17mm wrench, 6mm allen…
Print it with the front face down on the bed for best results, it's deliberately set up to not require supports if printed at that angle. If you're printing it front-down, then there's really no reason not to print it at 0.3mm layer…
A plug for the Repbox cable glands. they’re long enough to be easy to pull out, and they can grip 1.75mm filament making it easy to change filament without opening the Repbox door. Fusion source is included if you want to tweak them.…
This is an adaptor to connect a Bosch “GET” sander to a Henry vacuum (and probably some others too). Has an offset and angle that gives you a bit of control over the angle of the vacuum hose. Print at .2 or .3mm layer height (no need to…
A stand for a 58mm Profitec bottomless portafilter (with dosing ring) on an MHW-3Bomber mini coffee scale, sized for a Eureka Mignon grinder. Allows you to grind hands-free and weigh the output at the same time. I set it up so it slides…
This is a parametric stand for espresso tampers. I borrowed the basic shape and hex pattern inlay design from @ NathanJ7C 's design here: https://www.printables.com/model/328389-58mm-espresso-tamper-stand-version-2 but this is designed…
Works with Bosch GET 75-6N, GET 75-150, GET 65-5N, GET 65-125. Also tested with GSS 12V-13, and it looks like it'll fit other GSS sanders (though I don't have any to test). Works with 0.1-0.3mm layer height. I print mine in PETG, and…
These are all currently available results.
