Counting matching models…
This model avoids the interference or collision of the ABL sensor with the other parts of the 3D printer. There are 2 models: (1) the bracket and (2) a model of the BLTouch itself for hand movement testing. Four M3 hex head screws are…
This model is assembled from five parts. You will need the following hardware: 2 pcs M4x20 Allen screws with nuts (for the fan assembly.) 2 pcs M2x12 Allen screws with nuts (for the fan duct and outlet manifold assembly.) The fan duct and…
Print the parts with thick walls and top/bottom layers (2.4 mm.) Use 40% infill. It needs to be strong. In addition you will need: 2x 688ZZ (or 688-2RS) ball bearings (8x16x5 mm) 4x M4x10 Allen Head screws with washers 4x M4 T-nuts 4x…
Two M3x8 and two M3x4 Allen screws are required to install it. The two M3x4 screws holding the BLTouch self-tap into the bracket (do not overtighten!) Two M2x6 Allen screws are need to attach the cable clip (do not overtighten!) I used…
Replace the stock fan with a more powerful 5015 blower. Use the same mounting and screws from the stock fan. You'll need an M4x25 mm screw to mount the 5015 fan. Print using ASA (I suggest 0.2 mm layer height, 5 walls, 10 top and bottom…
Synchronizer Pulley Print with at least 2 mm walls, top/bottom layers and at least 40 % infill. This part needs to be strong. in addition you will need the following: Two GT2 36 teeth pulleys with 5 mm bores. One closed-loop GT2-852 mm…
PLEASE USE THE 3-OUTLET VERSION. IT IS BETTER. This model is assembled from four parts. You will need the following hardware: 2 pcs M4x20 Allen screws with nuts (for the fan assembly.) 2 pcs M2x12 Allen screws with nuts (for the fan duct…
The part cooling assembly was made lighter. The center cooling duct was changed to pass more air flow. Print the outlet ducts in ASA or ABS. Note: the K1 hot end ducts are 2 mm longer (towards the bed) than the stock hot end ducts This…
Parts: Top filament guide Filament sensor holder Filament sensor holder cover JST connector cover 2x M2x8 mm screws
These are all currently available results.
