Counting matching models…
Simple solution for large scissors storage on a Ikea Skadis pegboard Shameless Money Grab: ;) If you feel like it, you can support my hobby here https://buymeacoffee.com/mke.dan
Mr. Lube is a tool for lubricating 8mm “Z” axis drive screws. It is designed to attach directly to a “Super Lube” 3oz tube (m14 x 1.5 thread). I’ve included a cap that seals the tool and has a male thread in the end to store the standard…
Modified spacer so it locks into the Skadis board to aid during installation I've included both washer and caps for both #8 and #10 flat head screws 6 wall loops 25% infill Shameless Money Grab: ;) If you feel like it, you can support my…
DeWalt Drill Hanger Holder Print vertically 3 Wall loops 15% infill Mounts with #8 wood screws Shameless Money Grab: ;) If you feel like it, you can support my hobby here https://buymeacoffee.com/mke.dan
Compact detail sander with a 13 mm sanding width , designed for precise sanding in tight or hard-to-reach areas. Ideal for fine detail work, small parts, and controlled material removal. Cut Sandpaper Strip 13 mm × 183 mm (1/2″ × 7-1/4″)…
Fly Fishing Nail Knot Tool Remix
Shameless Money Grab: ;) If you feel like it, you can support my hobby here https://buymeacoffee.com/mke.dan
Wall mounting bracket for a Google Nest WIFI pro-6e. Mounts to the wall using qty 2 #10 screws. The one shown is PLA, 3 walls, 15% infill. Facilitates the storage of excess power cord.
Skadis Mount for Tertial Lamp
Greeting, This will allow you to store up to 2 deburring tools (14mm diameter) and 2 packs of replacement blades on an Ikea Skadi pegboard. Note: I've added a new version that holds 3 packs of replacement blades Shameless Money Grab: If…
This is a variation of Andrew Brady’s design. My intent was not to constrain the tube but to protect it from the sharp edges on the P1P sheet metal.
My intent was to design a simple robust bow sander that was easy to load. 166mm (6.53") long sanding surface. Sand Paper 13mm X 225mm long (cutting template file included) Printed in PLA on a P1P .08 layer height 3 walls 15% infill No…
My intent was to design a simple robust bow sander that was easy to load. 89mm (3.5") long sanding surface. Sand Paper 13mm X 225mm long (cutting template file included) Printed in PLA on a P1P .08 layer height 3 walls 15% infill No…
18650 Battery Storage Case, Holds 2 (button top or flat top) batteries No Hardware (screws and nuts) Required! The hinge pin is a piece of 1.75mm diameter filament (PLA is fine) Just cut to length and insert PLA 3 walls 15% infill…
Eye Drop Vial Travel Container – Screw Top (Holds 4 Refresh Plus Vials) Compact eye drop vial travel container with a screw-top lid , designed to hold four Refresh Plus single-use vials . Keeps vials protected, organized, and securely…
Electric Hand Drill Operated Paint Mixer “Mr. Shaky” Greetings All, I wanted to update A@_dESING's Paint shaker design so I could make the drill stem replaceable, adapt it for other paint bottles, and add a 3mm eccentric for enhanced…
Minor adjustment to the frame, head part so it works with older versions on Dummy 13 Heads
Skadis CA Glue Holder 47.5mm X 31mm opening
For Hex Screw Driver Set Kit, 0.9mm 1.27mm 1.3mm 1.5mm 2.0mm 2.5mm 3.0mm Hexagon Screwdriver
This design was originally created to improve the docking of the iRobot Mop. To date (3 months) I have not experienced any issues with the mop backing back up on the docking station. The printed platform slides under the front of the…
Skadis Mount for Fanttic Nex E1 Pro Power Screwdriver
PLA Matte but PETG would be a better material for a longer life .08 layer height 15% infill 3 walls The interface part is for a 150% Dummy 13
It's really not Christmas without John McClane crawling through a ventilation duct at Nakatomi Plaza. The included photo is sized to 4"X6" to send to your local photo processor. The 3 images on the photo are 41.5mm X 81.5mm Shameless…
Simple, stable pedestal stand designed for the Amazon Echo Dot Max . These stands elevate the Echo Dot Max to improve sound projection and visibility while keeping your desk or shelf setup clean and organized. Four height options are…
Battery Holder CR2032 Holds 20 I printed it with the text facing up, 3 walls, 15% infill, with no supports on my P1P
Skadis 33mm inside diameter pill bottle mounts. Single and double. Works very well with Walgreens pill bottles.
Battery Holder for LR44 / 303 / 357 / SR44 / AG13 button batteries. Holds 22 batteries I printed it with the text facing up, 3 walls, 15% infill, with no supports on my P1P
Print with 6 walls Press in a 6mm diameter x 3 magnet (you may want to add a drop of CA)
Simple, stable pedestal stand designed for the Amazon Echo Pop . These stands elevate the Echo Pop to improve sound projection and visibility while keeping your desk or shelf setup clean and organized. Four height options are included so…
My version of an organizer for the board game Patchwork Hey, no pressure—but if you're feelin' generous and want to support my hobby, you can do that right here 😉 https://buymeacoffee.com/mke.dan
Simple, sturdy SKÅDIS-compatible mount designed for the Amazon Alexa Echo Pop . The mount provides a secure, space-saving way to attach the Echo Pop to an IKEA SKÅDIS pegboard, keeping it off the desk while maintaining clear sound and…
P1P / P1S Aux Fan Cover Description: Simple aux fan cover designed for the Bambu Lab P1P and P1S , providing protection while maintaining proper airflow. Helps keep debris, loose filament, and accidental contact away from the auxiliary…
Battery Holder CR2025 holds 15 I printed it with the text facing up, 3 walls, 15% infill, with no supports on my P1P
Skadis Fluke 107 Mount Uses a qty of two 20mm diameter X 3mm thk magnets
So you’re cleaning your build plate in the sink with geyser-hot water and dish detergent, desperately trying to avoid scalding your hands while performing the delicate ballet of not touching the plate with your fingers . Sound familiar?…
Wee Little Box V2 54mm X 74mm X 22mm Deep
Compact travel case designed for Philips Sonicare 6000 and 7000 series toothbrushes , featuring vent holes for airflow and drying , a snap-fit lid , and a hinged design to keep the toothbrush securely contained while traveling. The case…
Skadis Mount for the Mr. Lube Z-axis lubricator Also See Mr. Lube
Big Ass Coaster 114mm (4.48") inside diameter Shameless Money Grab: ;) If you feel like it, you can support my hobby here https://buymeacoffee.com/mke.dan
Razor Caddy for Merkur Mk34c Double Edge Razor (and Mk34g) Includes a pocket for a 5 blade razor bank I had created earlier PLA .08 layer height (you could use .2) 3 walls 15% gyroid infill Shameless Money Grab: ;) If you feel like it,…
Mr. Lube V2 is a tool for lubricating 10mm “Z” axis drive screws. It is designed to attach directly to a “Super Lube” 3oz tube (m14 x 1.5 thread). NOTE: This for large 10mm screws!! Not the 8MM "Z" axis screws found on most 3d Printers…
Battery Holder CR2450 holds 10 I printed it with the text facing up, 3 walls, 15% infill, with no supports on my P1P Shameless Money Grab ;) If you feel like it, you can support my hobby here https://buymeacoffee.com/mke.dan
Simple, sturdy SKÅDIS-compatible holder designed to mount a SwitchBot Presence Sensor directly to an IKEA SKÅDIS pegboard. The holder keeps the sensor securely positioned while maintaining clear coverage for reliable presence detection.…
Valve Stem Cap (Standard Schrader Threads) Description: Simple, durable valve stem dust cap designed for standard Schrader valve threads (0.305"-32 UNEF), commonly used on automotive, bicycle, and other pneumatic tires. Provides…
These are all currently available results.
