Counting matching models…
These book ends are for cat lovers and for those who love the warrior cat series. The book ends simple slide under the books which act like as and invisible base of which the books own weight hold it in place. The Warrior Cats logo also…
a blooming flower with a ladybird switch. I print this a a 0.1 layer height, the petals 1 and 2 will need support around the hook end and i put a blocker to stop wasted support material (see screenshots) the heart U i printed with…
* update * new harder version head available if you find this one to easy. https://www.printables.com/model/597903-star-wars-r2d2-lvl2-hard-edition-puzzle-with-windu Hey all couldn't find a a small r2-d2 that my rubbish printer could…
Hi all here is my BB8 puzzle to go along with the R2-D2... enjoy You will need supports for the head, pin3 end and pin4. every thing else works without, some light sanding might be needed if your printer cant print arches/bridges well.…
Axolotl bath toy. Printed at 0.15 layer, with no infill. will need supports from baseplate of around 60degrees. enjoy
Phoenix made in 2 parts to combine 2 colours sections. Hi all, This model is a little bit tricky to set up to print, so would recommend looking at the photos attached for the best results. You need to set up the angles and supports in the…
Found the labyrinth maze to easy so made a harder lvl2 maze. I've kept the body and legs the same download here https://www.printables.com/model/593407-star-wars-r2-d2-r2d2-puzzle-with-windup-leg/files and simply reprint the head, no…
print with tree support over 60 degree and lighting infill to save material in cura.
push along BB-8 toy. uses two 10mm x 3mm n50 neodymium magnets, once the print is high enough place the magnet inside and let the print finish…. you can pause or throw it in as i did :) as you can see from photos the magnets are enclosed…
you can print all parts separately , or print the body +bow as one. If printing the bow separately would advise a skirt and tree supports (see attached)
This is based on the the apparently impossible cube, where I used the designs template , to make a spherical design with a clockwise and anticlockwise thread through the body, which means the segments need to be in the right order for it…
I printed this with tree support over 60 degree and lighting infill to save material in cura.
https://www.youtube.com/shorts/CEj0p_4mJ6c printed at a 0.2 layer height, with a 20% infill. there is almost no wastage as the outside frame makes the goal. Can be played as a single card or even print 2 (in different colours) and play 4…
Ironman low poly head with optional pencil topper, keyring or combo Have also included 3 optional alternative workings ALT WORKING 1.0,2.0,3.0 if anyone prefer these designs. printed with a 3 wall thickness with 0 infill …. Enjoy
A Carabiner with storage inside , plus a whistle with tic remover tool Print 2 main sections Print flat side down to allow the bridging process to work on the rotating bolt section , this has been designed so no support is needed under 70…
Lid with inbuilt honey dripper spoon best to print with supports under tabs and with a 99% infill to make sure strong
I love Budwins Deadpool mask, and wanted to make it more scary for Halloween and after watching Deadpool and Wolverine noticed a zombie version. so this is the results :) I used a piece of black plastic sandwiched between magnets to make…
*update* I found out the original version was to loose on my other one and would slide straight through making it unstable, so version 1.2 has a small base to prevent this. Have left the original just in case anyone wishes to use it A…
Print in place with a 3 wall thickness and 5% infill, I also used a brim and 50 degree overhang supports to stop ball (wheel from moving) . I would also suggest at least 10% support as %5 was a bit messy. Have also updated the file with…
Always taking the photos ? feeling left out ? use the new phone mount to velcro to posts, polls, tree branches, and set the timer, or use a bluetooth controler :) I printed this with a 4 wall thickness and 70% infill to provide strength.…
Always taking the photos ? feeling left out ? use the new phone mount to velcro to posts, polls, tree branches, and set the timer, or use a bluetooth controler :) Well after design my first phone holder, I starting to thing of ways to…
A simple hinged hole aligner for appliances. since the hinge is so small i would print minimum of 0.15mm layer height. Print in place no supports needed. Note, make sure your first layer has a clear gap (see photo) as if you get too much…
Cat shaped back Scratcher with ball of yarn grips. You will need 2 piece of cord 50cm long to tie together. I used 1mm cord but hole is 2.5mm Design in mind for limited mobility people as it goes over shoulder and down to side, the balls…
Printed at 0.15 layer with a 3 wall thickness and 60% infill. no supports needed from bed as have add my own bridge supports (shown in pictures as red) simply cut and remove these. to assemble the the nozzle place each tube inside one…
These are all currently available results.
