Counting matching models…
I've downloaded and printed a few different phone stands, but none of them seemed quite right. A lot of them seem designed for smaller (older) phones, or maybe phones that aren't in cases, with hooks that wrap around the front but won't…
This is an adapter to connect a 120mm PC fan to a 4 inch duct/pipe/dryer hose. I know there are already models like this out there, but I always find something I wish was done a little differently, so here's mine. It has the following…
I originally made this for measuring out dog food, although I have included a blank version that could be used for other things. I am also including the Fusion 360 file so that it can be customized, including the ability to easily change…
Print sideways (current rotation) with no supports. These mounts are designed to mount cables, devices, etc to a wall using nylon cable ties. Screw the mount to the wall through the middle, pass the strap through the slots on both sides,…
This is a blank for a keystone wall plate or patch panel. Printed and tested. Printing in the supplied orientation without rotating it ensures that the part that needs to flex isn't flexing on a layer line. Rotating it will weaken the…
The important stuff: This fusion file is set up to allow you to generate multiple types of north american wall plates, as well as single or multiple gangs, and oversize or undersize plates. To choose the type, unsupress one sketch that…
NOTE: Although this prints well on my old Anycubic i3 Mega, it does not print properly on my P1S. Because of the increased speed and accuracy of modern printers printing it on the side with the spinner does not offer enough stability. It…
Description This is a drawer to go in the 5.25" bay in the front of a PC. My previous version needed quite a bit of support to print properly. I have redesigned it to work with no supports at all. Improvements over previous design and…
This is a phone stand that I've designed to work with PopSockets. It should work in either landscape or portrait mode, and was tested with a Samsung Galaxy S22 Ultra. If you don't use PopSockets, check out my other phone stands:…
This was designed to repair the broken hinges on the center console arm rest cover of a Volkswagen Golf, but if my research is correct, I think it will work on several Volkswagen models including many Volkswagen Golf, Jetta, Beetle, Bora,…
Not sure if this will be useful to anyone. It's the little cone thing that is part of the extruder that comes with the Anycubic i3 Mega-S. I lost mine for awhile, and made this replacement. When I tried to pull it out after finding the…
This is a parametric solder spool that I originally remodeled for the Pinecil case created by Termiman (which is a remix of a remix of a remix from what I understand). By adjusting parameters within the included Fusion 360 file it can…
This is a simple bracket for installing a 2.5" hard drive or SSD in to a 3.5" bay. It is a somewhat minimal design. Designed to be relatively cheap without being overly flimsy. With the price of my material, it costs about 50 cents CAD.…
This is inspired by another equipment box for the Anycubic i3 Mega on Thingiverse, but I've created it from scratch with a few notable design differences. 1) The whole thing clips together and then clips to the printer with proper working…
This is a clip to hold a window screen on to a window. Unlike most of the others, this was made in two pieces. This makes it easy to scale the "barrel" for your application and also removes the need for supports. I've seen requirements…
This is a pulley cover for the rear Y axis pulley on the Anycubic i3 Mega (I guess it's a gear attached to a stepper motor, not exactly a pulley, but that's what everyone is calling it so we'll go with that) I decided I wanted some pulley…
This is a simple bracket for installing a 2.5" hard drive or SSD in to a 3.5" bay. It is a longer design than some of them and has all three of the standard screw holes found in 3.5" hard drives which is necessary in certain cases. I also…
I got the idea for this from the container by "Zombie Batman" (linked as a remix, though I did model it from scratch to fit my purpose) It fits the Pinecil case made by Termiman (also linked as a remix to make it easier to find), or at…
This is a kickstand to fit a Spigen phone case for a Samsung S21FE. I am not sure if there are other models it will fit. I don't believe the kickstand is compatible between all the Spigen cases. I have included a fully parametric Fusion…
This is a new variation of my equipment box that I made back in March of 2020 for the Anycubic Mega I3 Mega. You can check out my older design here: https://www.printables.com/prints/33156-anycubic-i3-mega-clip-on-box This one is a bit…
This is a spool holder specifically designed for the AnyCubic i3 Mega-S. (And possibly the Mega Pro/Mega X?? .. Looks like they may use the same factory spool holder) What this isn't: This isn't designed to be the smoothest rolling spool…
This is a replacement latch for a Sterilite Gasket Box. The ones I own are 54qt (51L), but from looking at pictures of other Sterilite gasket boxes, I think this latch is used on multiple models. It fits pretty tightly (tighter than the…
I wanted a custom strike plate for an outside door that I have that was marking up the door frame because of how it was installed. It had to be longer than standard with a custom spacer. I did find some strike plates already on…
This is a version of my phone stand that I made a couple years ago that allows you to insert an Apple magsafe charger for wireless charging capability (alternately, here is a cheaper alternative charger that another maker has verified is…
There are a number of different types of devices for automotive use (phone mounts, GPS, backup cams, etc) that connect to a stand using a socket that fits over a 17mm ball. This is a replacement stand for those devices. I made it to…
This is a case that will hold ten microSD cards and a small USB card reader (or I guess technically eleven cards if you keep one in the reader). I designed it around the SanDisk model that I have. I believe it is model number…
I had one of my fence post caps go missing, and I wanted one that would match my others (at least in size and shape) so this is what I came up with. It almost exactly matches the cheap wooden fence post caps that I got at Home Depot. If…
This is a holster for the Leatherman Wave+ multi tool. I made it as two separate pieces so that each piece can be printed in the correct orientation to optimize for strength. Many of the other existing models are too weak and break easily…
This was made to mount a post/pole to the side of something. I used it to mount my weather station (AcuRite 01536) to a fence. The diameter of the pole I used was 26mm. Because I knew it was going to take a ton of plastic and I didn't…
This is a bracket for installing two 2.5" hard drives or solid state drives in to a single 3.5" hard drive bay. Optionally, it can be used to mount one 2.5" drive on top and a 60x60x10mm cooling fan below it. If you're only mounting one…
This is a simple cone-shaped tassel for the pull cords on blinds. My dog ate the originals. Print instructions Print Settings Printer: Anycubic i3 Mega-S Rafts: No Supports: No Resolution: 0.2
This is a simple remix of a toilet paper/paper towel holder originally created by “PattysLab” and remixed by PjotrStrog. The only change I made to it was adding screw holes so that I could attach it that way instead of using double sided…
When I was a wee lad, my grandfather had a cast iron version of this puzzle in his livingroom. It became kind of a rite of passage that us kids would have to each complete the puzzle on our own without any help. I have now recreated it…
I converted my Anycubic i3 Mega-S to dual extrusion, and I was originally working on a guide showing exactly how I did it (since the way I did it is different from what I've seen posted already) but.... an entire guide is a lot of work…
This is a cap to go over the bolts on a toilet. I noticed one of mine was missing, and I wanted a cap that I could install without unbolting the toilet, and that would stay in place. I designed this to thread on to the top of the 1/4 inch…
These are rear bumper dome caps designed to fit the following truck models: Toyota Tacoma 05-15 Toyota Tundra 00-06 This is to replace Toyota part number PT22834000BK Note that I did kind of wing it on some of the dimensions, and they fit…
This is a simple light shade made to fit my chandelier. I have included the Fusion 360 file so that it can be customized easily. My chandelier didn't come with shades, and although I like a lot of light, other people in my house…
This is a nozzle rack that I designed for my Anycubic I3 Mega S. I imagine it will also fit other similar models. This one sits on the left hand side of the printer and mounts using the vent holes. Prior to this one I made a nozzle rack…
This is a filament tensioning knob for the stock titan style extruder that comes with the Anycubic i3 Mega S. I'm not sure what other printers it will fit, but there definitely may be others. This knob fits right over top of the existing…
This is a box for a Gardner Bender GSW-41 switch that will mount to the AnyCubic i3 Mega. It mounts by clipping in to the hole for the voltage switch to switch between 110/220 volts. I figured most people set that switch once, and never…
I was given an eSun filament dryer, and instead of just selecting a drying temperature which is how I thought it would be designed, you have to set a temperature “mode” between 1 and 4. Of course, without the documentation, it's anyone's…
Mr. Jack O. Lantern is expecting to come in to contact with many young unvaccinated children this Halloween, so to protect him and his family I have supplied him with a mask and a vaccine. I may have been a bit too late though. He has…
This is a rotating vent. It rotates 360 degrees to direct the air wherever you want it to go. The diameter at the widest point is just over 6 inches, and the pictured "pipe" piece is quite long and designed to fit inside a 5 inch hose,…
I made this insert to go in to a tin from some “Bach Original Flower Remedies Recue Pastilles”. I can't attest to the value of this product, but it was given to me, and it's a pretty cool and durable metal tin so I wanted to make…
Here is yet another style of drive adapter to mount 2.5" hard drives or solid state drives in to 3.5" drive bays (I've already made three other designs). The reason I made this one is because I saw people making the stackable covid…
Seadoo Latch-Cover (Part #291000165) This is a replacement latch for the front cover (storage compartment) on earlier model Seadoo personal water craft. It was designed to look very similar to the original, but because TPU tends to have…
This is a threaded cleanout plug for 4 inch PVC pipe that screws in flush with the end of the pipe. I have included a blank plug, as well as one labeled “Roof Water”, “Perimeter Drain”, and a wrench to make tightening and loosening them…
This is a replacement handle for the Igloo cooler in the pictures. I have been unable to determine the exact model. I broke the original handle and created this replacement. To use it, you will need to break or cut off any remaining…
When I was looking for a nozzle rack, I did find standalone racks, and racks that attached to other printers, but none that attached to the Anycubic i3 Mega. Since I have very limited space around my printer, it is convenient for me to…
This is an end piece for a "Bestway" brand A-Frame pool ladder. It fits on the end of the metal tubes to provide some cushioning so that the steel ladder ends don't damage the pool. I have included a picture of the ladder and the pool…
Description Besides the use which I will outline below, this model can also be used as a somewhat-universal spool for filament refills of different brands: Are you constantly having to respool filament that comes on cardboard rolls in…
I bought a Remington dog crate at a garage sale. Unfortunately, some of the clips that hold it together were missing, so I printed my own. Based on my measurements compared to the measurements posted on Walmart's website, I believe I have…
This is a lid for an 11 cup Pyrex baking dish. I printed in 95A TPU which worked great. To get the look shown in the picture I printed the first few layers in clear TPU and then switched to black TPU. Remixed from the smaller lid by…
I have been experimenting with the Klipper firmware on my Anycubic i3 Mega S and controlling my printer using KlipperScreen ( https://github.com/jordanruthe/KlipperScreen ). I got sick of having the screen just hanging from some cables,…
This is a replacement handle for the adjustable dish racks in Samsung Dishwasher model DW80K7050US. I'm not sure if they use these same handles in any other models. There are several of these throughout my dishwasher, and oddly, when I…
I made this simple corner bracket that holds a piece of rebar upright. I attached it to the back corners of my large planter and put chicken wire between them to act as a trellis for my peas. Netting also would have worked. I pushed the…
PLEASE SEE IMPORTANT NOTES IN THE “REQUIRED HARDWARE” SECTION BEFORE DECIDING TO PRINT THIS This is to allow you to use a Milwaukee Hard Hat Headlamp (Part #2163-21) as a work light that can be held or stuck somewhere with a magnet.…
I needed a holder for a relatively large volume of USB sticks, and I also wanted room to hold some pens. This is what I came up with. It holds 22 USB sticks, it has a cup for pens, and a shelf for small items. The USB sticks are held on a…
This is a replacement guide tube for the Bionicon C.Guide V.02 (Bicycle chain guide). I made it for a family member that wore his out, and then found that the only replacement part comes from the UK. With the price of international…
I bought this "Summer Infant" gate several years ago. I actually use it as a pet gate rather than an infant gate. Overall the product is good quality and well designed, with the exception of the plastic latch. It was designed so that you…
These are the parts I used to install a Trigorilla board (from an Anycubic i3 Mega S) in to a Monoprice Maker Select V1 that originally comes with a Melzi board. It should also work on the V2, the Wanhao Duplicator i3, and the Cocoon…
This is a mounting bracket to mount a Ubiquiti U6+ Access Point to a 4 inch octagonal box. Nov 2025: I added a version 2 that I'm hoping will work with either an octagonal junction box or the normal rectangular work boxes. I'd appreciate…
British Columbia stopped issuing stickers to put on your plate to show when your insurance expires. I like having an easy to check visual reminder on my plate, so I decided to make my own. The included STL simply has an infinity symbol…
These are frame clips to attach a W5 Pro Mini PC to the side of a 3D printer. I've included clips for the Anycubic i3 Mega and the Monoprice Maker Select. The clip is designed in a way that the Mini PC can be removed from it easily enough…
This is a replacement switch for the pictured hand warmer from "ihatethecold.com". The original fell off and got lost. This one will need to be attached with a small amount of glue. Be careful to only use a small amount and only where you…
These are all currently available results.
