Counting matching models…
A battery mount for AAA battery using battery spring plate ( https://www.banggood.com/10-Pairs-Silver-Tone-Metal-Battery-Spring-Plate-Set-for-AA-AAA-Batteries-p-1046111.html?rmmds=myorder&cur_warehouse=CN ) for connection. Print Settings…
one side of the rear shelf hinge was removed and broke. I re designed it as shown and it fits perfectly. l'axe d'un coté de la plage arrière de la XC40 s'est détaché et une moitié à cassé. Je l'ai re dessiné comme vous pouvez le voir et…
Dolly (or trolley ?) for medium size glider in towing mode. Chariot de remorquage pour planeur petit et moyen 3mm diam for the wheels steel shaft inside a 4mm brass tube / Axe en corde à piano de 3mm dans un tube laiton de 4mm I added a…
This holder enable to pull easily the MPX female plug from the male plug. Fill with hot glue the female holder. / Manchon pour prise multiplex female permettant un retrait facile de la prise male. Remplir le manchon de colle chaude pour…
Use a 3mm carbon or metal rod Category: R/C Vehicles
Les attaches de reglettes Néon distribuées par les magasins de bricolage sont fragiles et cèdent facilement ou ne sont pas durables. J'ai dessiné les 3 pièces qui constituent une attache pour la refaire en partie ou totalement. Category:…
This is a nose cone i draw to change the one on an motorised rc soaring plane which broke. Need a 2mm screw. Quite happy with the result as weight is not bad and the balance is good. Print Settings Printer: HK fabrikator Rafts: No…
The support on the clothes drying rack is almost broken. I designed a replacement and printed it, ity does fit well / Pièce de support sur un etendoir àç linge en remplacement de celle qui sont usées et cassées. Les nouvelles bont très…
Jante de remplacement pour roues de baron d'origne. J'ai aussi dessiné le pneu pour l'imprimer en TPU mais pas encore réalisé. Axe tube laiton diametre 3mm intérieur, 4mm exterieur Ajout du demi pneu en fichier STL, l'impression du pneu…
New mould for MPX connectors, for male/femelle Category: Toys & Games
This is a replacement part for servo support in a "Biglift" towing plane wing. 3 parts to print, glue the two plates and screw the servo lock. Support de servo de remplacement dans l'aile d'un remorqueur "Biglift ". 3 parties à imprimer.…
This is a mold for Hot Glue allowing to secure connections of wires/soldering with the plug Print Settings Printer: fabrikator mini 2 Rafts: No Supports: No Resolution: 0.2 Infill: 50% Category: DIY
Customized version of http://www.thingiverse.com/thing:705118 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=705118 Instructions Using the following options: height = 8 bolt_size = 4 nut_on_top = 1…
Cornet d'admission d'air pour carburateur de moteur de type DLE 30 / Airn Horn Inlet for carburator on engine like DLE 30 Print Settings Printer: HK fabrikator Rafts: No Resolution: 0.12 Infill: 100% Filament: eSUN PLA Category: DIY
Customized version of http://www.thingiverse.com/thing:193647 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=193647 Instructions Using the following options: nut_diameter = 12 nut_resolution = 0.5 facets…
Customized version of http://www.thingiverse.com/thing:705118 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=705118 Instructions Using the following options: height = 8 cut_count = 25 shaft_height = 3…
CG Balancer for planes. I use raft just for the part #4. All others can be arranged such as no raft is needed, laying on the back. It is built for tube of 16mm diameter, the small is 6mm and the T shape is 15mmx15mm Category: R/C Vehicles
Customized version of https://www.thingiverse.com/thing:62800 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=62800 Instructions Using the following options: gopro_primary = triple gopro_secondary_what =…
Customized version of http://www.thingiverse.com/thing:705118 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=705118 Instructions Using the following options: bolt_size = 5 shaft_diameter = 15 shaft_on_top…
Another servo support requested by one friend for his Solius./ Autre support de servo pour le solius d'un ami Print Settings Printer: HK fabrikator Rafts: No Supports: Yes Resolution: 0.2 or 0.12 Infill: 100% Filament: eSUN PLA Category:…
This is a design of "cache de palonnier" for R/C plane using Fusion 360 with parametric capabilities : Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes Resolution: 0.2 Filament: eSUN PLA How I Designed…
LOGITECH UNIFYING RECEIVER PROTECTION BOX since it does come without any Category: Computer
Customized version of http://www.thingiverse.com/thing:705118 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=705118 Instructions Using the following options: cut_diameter = 5 diameter = 20 shaft_on_top =…
Customized version of http://www.thingiverse.com/thing:193647 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=193647 Instructions Using the following options: head_type = countersunk nut_resolution = 0.5…
Here are some printed parts to convert the lidl glider into a full incidence model. Hardware required : 3mm carbon pushrod, 4mm metal or carbon tube (aluminium, ...) 2.5 mm screw with bolt 1mm stell wire for connecting servo and wing. Use…
This is a Quick Link for 1mm wire used on RC Plane Print Settings Printer: HK fabrikator Rafts: Yes Supports: No Resolution: 0.1 Infill: 0% Notes: 3 shells Category: R/C Vehicles
Customized version of http://www.thingiverse.com/thing:193647 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=193647 Instructions Using the following options: resolution = 0.3 slot_width = 1.5 thickness =…
This support can be organized one in another Print Settings Printer: Fabrikator mini 2 Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.2 Category: Computer
Simple knob for the extruder motor, remix for the new direct drive motor for Ender 3 from Creality. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes Resolution: 0.12 Infill: 25% Filament: SOVB3D PLA…
This is a transmitter neck strap attach for Futaba 14SG radio. It may work with other depending on the ring on the radio. Attache pour radio Futaba 14SG Print Settings Printer: fabrikator mini 2 Rafts: No Supports: Yes Resolution: 0.1…
This is quick and easy design for a wheel chock for my BigLift. Wheel size is 160mm diameter and 50mm large. Thus when doing some maintenance work on engine or radio i am confident it wont move. https://youtu.be/ATGxVJcMo9c Category: R/C…
Simple mold for XT30 Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.12 Infill: 25% Filament: eSUN PLA Category: Electronics
Customized version of https://www.thingiverse.com/thing:62800 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=62800 Instructions Using the following options: gopro_primary = triple gopro_secondary_what =…
Print case vertically, no support needed. I use cotton bud tube for protecting and holding the antenna / Impression verticale sans support requis. Utilisation de tube de coton tige pour protéger et tenir les antennes 14/06/2019 : added a…
Support for an EDF motor on the ligl glider For his motor https://hobbyking.com/en_us/dr-mad-thrust-40mm-8-blade-alloy-edf-8000kv-motor-330-watt-3s.html Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes…
Customized version of http://www.thingiverse.com/thing:713300 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=713300 Instructions Using the following options: knurled_density = 42 height = 25…
Customized version of http://www.thingiverse.com/thing:713300 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=713300 Instructions Using the following options: knurled_density = 42 nut_sides = 6…
This is a dedicated motor mount for the Turnigy SK3 2822 1740. it needs holes for 16 and 19mm distance. It must be used with the Rise upgrade kit https://www.planeprint.com/product-page/rise-upgrade-kit-motor-spoiler Print Settings…
Customized version of http://www.thingiverse.com/thing:193647 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=193647 Instructions Using the following options: non_thread_length = 8 thread_length = 8…
Control Horn cache for the Widl (Yellow, Black), Flidl (Yellow, Red) and Midl (White, Red) versions for HXT900 servos Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.12 Infill: 100%…
Need a rubber band to hold it. Update 09.2018 with a single round of PLA, easy to manage and it wont move Print Settings Printer: fabrikator mini 2 Rafts: No Supports: Yes Resolution: 0.2 Infill: 100 Category: R/C Vehicles
This isa remix of the Filament Top mount attachment for Sidewinder X2 when brakets are installed. I needed to remix this part from the original design in order to attach the filament top mount on top braket support. Remix frm this model…
Customized version of http://www.thingiverse.com/thing:713300 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=713300 Instructions Using the following options: bottom_thickness = 0.0 height = 25…
Molette de serrage des pieds d'un mono tréteau en remplacement d'une moitié qui a cassé. Print Settings Printer: HK fabrikator Rafts: No Supports: Yes Resolution: 0.2 Infill: 80 Category: Model Furniture
Simple wall mount for th S800 SKYSHADOW Category: DIY
Customized version of http://www.thingiverse.com/thing:713300 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=713300 Instructions Using the following options: nut_thickness = 10 nut_width = 4.1…
This is a box for the Multifunctional Converter SBUS-PWM-PPM like this one http://www.banggood.com/S_BUS-Turn-PWMs_bus-14CH-Multi-functional-Converter-SBUS-to-PWM-p-984155.html Print Settings Printer: HK fabrikator Rafts: No Supports: No…
A bungee launching platform made of 20 mm diameter PVC tube for electric cable. You will need 4 base connectors; 2 front connectors; 2 back connectors walls 3 top 3 bottom 3 infill 15% PETG recommended
This is an adapter for Super 8mm film viewer Goko G-2002 Dual-8. Adapteur pour visionneuse de film super 8mm de marque Goko G-2002 Dual-8 Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2…
This is a remix of the Altis v4+ support from MVano. I needed a holder and a support to fix it in my Towing rc plane, a biglift. Remix du boitier altis par MVano. J'avais besoin d'un boitier et d'un support pour l'altis v4+ dans mon…
pegs bag support for Leifheit 82100 / support simple pour bac de pinces à linge sur étendoir Leifheit 82100 Print Settings Printer: HK fabrikator Rafts: No Supports: No Resolution: 0.2 Infill: 15 Filament: eSUN PLA Category: DIY
These supports, right and left, are for tiny servos Protronik 7350 MG-D in a rc plane, ASW15 from Silencemodel, http://silencemodel.fr/product.php?id_product=1274 . Total weight is 2,4g Print Settings Printer: Mini Fabrikator 2 Rafts: No…
Customized version of http://www.thingiverse.com/thing:193647 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=193647 Instructions Using the following options: resolution = 0.2 slot_width = 1.5 thickness =…
The wing separator allows to separate wing from fuselage when the connection is too tied. Print Settings Printer Brand: Creality Printer: Ender 3 Supports: No Resolution: 0.12 Filament: HK PLA Category: R/C Vehicles
Customized version of https://www.thingiverse.com/thing:739573 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=739573 Instructions Using the following options: line1 = AVION line2 = line3 = line4 = line5…
A simple box to hold my Rx Corona R14FA in my towing plane, MPX BigLift II Category: R/C Vehicles
One friend (thanks Jordan) designed the replacement slider for the FF9 radio. It allows to use the cursor from the top of transmiiter, this is better when this one is installed on a tray. Print Settings Printer: HK Mini Fabrikator 2…
Different Switch for power ON/OFF of the Futaba T14SG. Use the 123DX file to change your own name. Easy Bouton ON/OFF de mise en marche de la T14SG Futaba Changer le nom sur le bouton avec le fichier 123DX Category: R/C Vehicles
Small case for 2 T531BBD servos mounted in the FIU rc plane kit http://jivaro-models.org/fiu/page_fiu.htm Print Settings Printer: HK fabrikator Rafts: No Supports: No Resolution: 0.1 Infill: 100% Category: R/C Vehicles
The legs with this frame are broken very quickly, i designed and printed simple legs to avoid my ESC being in touch with the ground when langing, soft or hard .... Just use one 3mm screw to attach it through the hole already there. Print…
Customized version of http://www.thingiverse.com/thing:747679 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=747679 Instructions Using the following options: DecoOS = 0 DecoN = 6 DecoR = 2 HoleD = 7…
Wheels stand for the PlanePrint Big Bobber to avoid TPU wheels to be flat Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.2 Infill: 15 Filament: N/A PLA Category: R/C Vehicles
Power ON/OFF button replacement with your own text. Write your name or something else (5 to 6 letters) by editing the Text Object in 123D then extrude 1mm Move 50mm the text to the left on top of the button Then lower text by 1mm and…
Customized version of https://www.thingiverse.com/thing:739573 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=739573 Instructions Using the following options: line1 = PLANEUR line2 = line3 = line4 =…
Customized version of http://www.thingiverse.com/thing:336794 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=336794 Instructions Using the following options: text_font = Letters.dxf show_text = yes…
Customized version of http://www.thingiverse.com/thing:193647 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=193647 Instructions Using the following options: nut_type = normal nut_thread_step = 2…
Customized version of http://www.thingiverse.com/thing:1170503 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=1170503 Instructions Using the following options: fontSize_3 = 4 fontSize_2 = 4 fontSize_1 = 5…
Customized version of http://www.thingiverse.com/thing:1170503 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=1170503 Instructions Using the following options: line_3 = ToWork line_2 = #NewWay line_1 =…
This a remix for the Foxeer TM25 transmitter Category: R/C Vehicles
In order to avoid grass or soil to go into the motor each time i do not land correctly .... i draw this protection fixed using 2 of the 4 motor screws under the arm. May be longer screws may be needed. Print Settings Printer: Hobbyking…
I made this supports for 3 kinds of led. A 12 led cluster from HobbyKing, 12V, (ref 12LED-RE / 12LED-BL / 12LED-GR / 12LED-WH) to be positionned at the back or in the front. A 3 led with buzzer for Naze32, 5V, (Ref 090000013-0) to be…
The alarm badge broke and cannot be attach anymore. So i built this case, 2 elements glued together, for storing the badge. The hole allow to attach it again to your keys. Print Settings Printer: Hobbyking Fabrikator Rafts: Yes Supports:…
These parts are joining the two parts aileron of the widl. I include the screw adpater to fix the wing to the fuselage Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.12 Infill: 100%…
Antenna mount for VTX. Last version with larger base to get stronger fit Print Settings Printer: fabrikator mini 2 Rafts: No Supports: No Resolution: 0.2 Infill: 20% Category: R/C Vehicles
Customized version of http://www.thingiverse.com/thing:1068400 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=1068400 Instructions Using the following options: front_offset = 0 hole_size = 3.2 rear_cc =…
This led support suits the HK fabrikator mini 2. I used this device https://www.banggood.com/Remote-Controller-11Keys-Mini-Dimmer-for-Led-Single-Color-Strip-DC-12V-p-91895.html?rmmds=myorder for remote control of 3 leds on each side of…
This is a basic protection for the CanalPlus remote controler, it avoids breaking angles when falling. Print Settings Printer: HK Fabrikator Mini 2 Rafts: Doesn't Matter Supports: No Resolution: 0.2 Infill: 20% How I Designed This 123DX…
This push button allows to pump gas intop the carburator while i cannot use finger to fill the carb when turning the propeller Modified : 05.10.2019 : added a support to store the push button on the plane Print Settings Printer: HK…
Geeetech BL Touch sensor support for HK Fabrikator Category: 3D Printer Accessories
These are all currently available results.
