Counting matching models…
I broke my crossbow bolt. The metal tip was still good so I made this replacement arrow body. Print instructions Print as it is. I used PLA. Use a support enforcer in the part where the metal tip goes. Print it strong so use high…
Strong corner bracket for 2020 aluminium extrusion. M5 screw holes. No supports needed. Use brim for best bed adhesion, PETG and solid infill. Remember to tap the threat to the extrusion.
Update 26.6.2023 Right side versio 2, is a for printers that don't do bridges that well. Stems are 0.4mm narrower, and should give more space in Z axes.
Needed some big nails for my archery target. Sinks well in to the foam back and keeps the paper target in order.
220mm fan replacement. Shaft diameter 6mm/8mm. Printed from PLA.
I like to use only one glove when working with resin prints and found it difficult to put the hood back with only one hand. So I designed this simply knob.
I bought the kit with the telezoom lens. So I needed a lens cap holder for both 40.5mm and 49mm. I could not find a solution so I created this. Print instructions Category: Sport & Outdoors Summary I bought the kit with the telezoom lens.…
Designed this door handle sign to inform possible visitors. Two color print, color change is at the 2mm.
Print both parts. Print in PLA or PETG. PETG is the better option. If you print in PLA use high printing temperature for better layer adhesion. Lower part needs supports. You can also paint the parts for better UV protection.
Letter M shaped self-watering planter. Everyone in my family has name starting with letter M, except my wife. Print from PLA, use 3 walls or more to make it watertight, bottom layers should be 4. The indicator (planter3) should be printed…
Air purifier for SLA printers. Circulates the air inside of the SLA printer hood, with carbon filter to absorb the resin fumes generated during printing. You need: 40mm 5v fan. Thin carbon filter. I used cuttable Sini vacuum cleaner odor…
Needed a extra hot shoe for my Sony A6300 SmallRig, to mount my shotgun microphone and camera light. made a small tilt in to the mount to point the light more to the direction of the lens. Print as it is. I used 40% infill and 2 walls. M6…
Made a flashlight mount for my Sliding Legolini. Flashlight diameter is 21mm. Print instructions Print as it is, use supports from bed. I printed using PLA, but should also work with PETG. You also need a flashlight, M4X20mm screw to…
Wanted a small stand for my Sliding Legolini and couldn't find a suitable so I made my own. Print instructions Print as it is and enjoy. Use some infill to give it weight.
Masking tape dispenser up to 38mm wide rolls. You need two printable bearings for both ends of the hub, the cap locks the hole assembly together. The bearings need freeing-up before assembly. You could apply some silicon or PTEF-lubricant…
Simple, easy and fast printing back scratcher. Print on it side, no assembly or supports needed. PLA is fine. Use enough walls so that the thin part does only have walls, no infill.
Calcium chloride is a salt often used as a moisture absorbent, but it makes this goo that drips water. This two part container stores the calcium chloride in the inside container and the absorbed water can drop down to vat, where it can…
Made a switch for my friends boat. Print in PETG and use supports.
Print using TPU. The elasticity depends on material and infill. No post processing needed.
Needed a adapter so made this one when didn't find anything for the purpose. Gopro hero 8 charging door used in the model is from ffleurey from Thingiverse: https://www.thingiverse.com/thing:4553897
Needed a bracket for a cheap Chinese webcam for Ikea enclosure. You need Two suitable m3 screws, can't remember the length. You also need supports for the first file.
These are all currently available results.
