Counting matching models…
A BNC connector dust cap. Openscad source file included. The bayonet slot of this cap design has a cavity at the end to hold it better in place. I am marking it as 'customizable' even though the openscad code requires parameters cleanup…
A simple tool to extract Prusa CORE One nylon rivets. These are reusable rivets that are made of two parts, the outer sleeve and the inner pin. This tool extracts the inner pin which makes it possible to remove the outer sleeve from the…
This is a drainer for a small bathroom sink. The hole sizes were selected to provide a good balance between filtering and flow. Print in upside down orientation with no material support. The OpenScad source file is also included. I didn't…
This is a remix of thing 1363148. The gecko has three magnets cavities that allow to embed 1, 2, or 3 magnets, depending on the necessary force. The cavities were designed for 5/16 x 5/16 cylindrical Neodymium magnets which are available…
This is a mesh cleanup of thing 1363148 . The original STL has self intersecting faces which causes issue with some tools (e.g. openscad). The cleanup was done by the trinckle free online service an addition to a trivial rotation, scaling…
This is an OpenScad design of the 'torture test' that is often shown in Maker's Muse and other video channels. To change its dimensions click on the Open In Customer button here (you need to be logged in into Thingieverse to see that…
This is a generator for rounded open boxes with and without covers (e.g. to keep change on your counter or the soap in your shower). To set the desired dimensions or to chose if you want only the base or the cover click on the Open With…
Tired of having Bowden clips that are too thin or too thick? Well, you are in luck with this Bowden clip factory. Simply click on the Open In Customizer button here and adjust the thickness of other dimension of the Bowden clip model. I…
This is a funnel tray for small parts. Customize dimensions using the Thingiverse Customizer button in this page. If you are left handed make sure to change the orientation parameter or just swap the width and the length values. Category:…
NOTE TO SIMPLIFY 3D USERS: several users reported that S3D doesn't slice this model correctly and I was able to reproduce it, the 0.2 part is fused at about Z=10mm http://i.imgur.com/99Qa9SV.png . If this happens to you, try one of these…
A great gift idea. Personalize the name and give to your friend. This bag clip thing is fully customizable, including the text message. To create your own, open here in the customizer and adjust as needed. I printed with PLA, no support,…
Customized version of http://www.thingiverse.com/thing:351541 . It fits our bathroom sink drains. Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=351541 The slots are intentionally narrow to capture small…
Edit: while this mod makes the Olsson's wrench better, I found the usefulness of the Olsson's wrench questionable. It doesn't seem to apply enough torque when tightening the nozzle and since I started using it I experience a few filament…
When solder paste printing a PCB with a stencil you want to hold the PCB and stencil securely. These brackets are typically at the exact thickness of the PCB so they hold the PCB securely and keep the stencil flat. To generate your own…
This is a customizable maker of bed leveling test objects. Use the Customizer button here to create a test model for your printer and print it. I print without skirt/brim, and examine the bottoms of the chips to be flat, but not being too…
This is a customizable heat tower inspired by thing #2213410. If you want to have different labels simply click on the Customizer button and enter the list of labels (bottom label first). Step height is 5mm (equals to 25 layers @ 0.2mm…
I printed this using ASA on Prusa Core 1, no support and no brim. Parameteric design on Onshape:…
This is a customizable case for an X-Acto knife. To customize login to Thingiverse and click the Open In Customizer button. The default dimensions are for an X-Acto #2 knife as I used on my own printer. The case as at one and a slot to…
(if you want to be able to open your compatible GOJO dispenser without tools, take a look at thing 3290689) Lost the opening tool of your GOJO soap dispenser, no problem, print a few and keep one in every drawer or attach to your key…
I wanted a solid solder spool holder that doesn't get apart easily so designed my own. Since I am a hobbyist and a 250g spool last for years, decided to design a one time spool that is held strong by glue and doesn't come aparat. Printing…
Update Apr/3/2016: changed the orientation of the model to a better printing orientation (two rods are along the printing bad, similar to helicopter landing gear. I printed a new one today using Hatchbox yellow ABS with support material…
These are pullers for blind cords or chains. You can customize them using the Customize button on this Thingiverse page. I print them in two colors, a lighter color for the 'open' cord and a darker color for the 'close' cord. Category:…
This is a customizable dust pan. I use it to collect the leftover pieces of filaments from the bottom of my FlashForge Creator Pro. To customize dimensions use the Thingiverse customizer button in this page. Category: 3D Printer Accessories
This is a variation of the Fidget Magic Bean thing 2292125 . It is a single piece model and the metal ball is inserted by pausing the printing at about 60%, dropping the ball, and continuing the printing. I got better results this way…
(to tweak the dimensions of this model click on the Open In Customizer button, adjust as needed and saved the modified design) Use this thing for safe disposal of X-Acto blades. Simply insert your used blades through the slot and when the…
Use this mount to have your Nextion 3.5" display in an ergonomic orientation while developing your code. Support material not needed. Print it standing on its left side, and add brim is you want to be on the safe side. Clean the four…
Looking for a simple, strong and effective FlashForge Pro Creator filament guide holder? You are in luck. This is a non nonsense replacement that is strong, allow you to position it any way you want and doesn't stand in the way when you…
This is a motorized solder paste dispenser for soldering SMT boards that was inspired by this thing http://www.thingiverse.com/thing:384680 . The home directory of this project is on github here…
This tool will help you to insert and remove the USB flash drive on some Tesla cars such as Tesla Model 3 2025 with a very shallow narrow. Source model on onshape.com is available here…
This is a model of a fidget stick (if you don't know what a fidget stick is Google for it . The spinner stick is printed as is in one piece. It has a rounded contour, hollow in the center and has extra solid material at both ends, acting…
This is a simpler version of thing 3155344 which eliminates the ball bearings. This works better for me because it eliminates the spool 'runaway' due to the very low friction of the bearings. Included are both STL and Fusion 360 design…
NOTE (Oct 2016): for an alternative design that uses bearings to minimize the friction please see here http://www.thingiverse.com/thing:1728291 . This simpler design here should work just fine though. This customizable spool holder fits…
This is a customizable generator of standoff to mount two lead LEDS above a PCB. I find it more convenient than ordering them from Digikey (e.g. part number 36-7363-ND) because I can easily iterate tweak the dimensions, printing them…
Russian Babushka style part trays. Open in customizer and select number of trays, dimensions and other parameters. All the trays nest inside the larger tray for compact storage. Category: DIY
This is a SD card grip similar to a few others here on Thingiverse. It's main features are Customizable. You can tweak it to fit your needs. The default dimensions have a short SD slot that allows to use it with SD socket with a 'push it…
Edit: printing the mouthpiece from a soft material such as NinjaFlex or TPU will make it more ergonomic. NEW : added a model for a mouth piece that allow to have a stand alone pick and place tool with no vacuum pump. The tube is a…
(see here related thing: http://www.thingiverse.com/thing:1194922 ) This part replaces the stock top extruder plate of the Flashforge Creator Pro. It improves the clamping of the wire bundle to the extruder and improves the interface…
Click on the Customizer button in this page to create your own random tile. Category: Math Art
Use this to test the bed leveling of your Flashforge Creator Pro. It is also useful to test the flatness of your bed, for example, to detect bubbles after installing a PEI or BuildTak surface. Features: Magnetic Customizable, easy to…
This is an experimental test cube that explores eliminating the elephant-foot artifact by compensating the 3D model. The compensation is done by insetting the first layer(s) by small amounts. This model is customizable so if you don't…
This is a customizable model for testing the quality of thin walls generated by your slicer and 3D printer. It all started when I noticed that printing of thin walls on my I3V printer resulted with vertical layers with no inter adhesion…
I love my Flashforge Creator Pro except for one ergonomic problem, when I stand next to it I simply cannot see the display because it is too low and is vertical. I need either to step back or bend down. Not anymore. This design provide a…
Customized version of http://www.thingiverse.com/thing:2011351 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=2011351 Category: 3D Printer Accessories
Feb 11 2015: this is version #2 of this design. It can be printed on a standard single extruder printer with no material support. Project home page: https://github.com/zapta/misc/tree/master/prototyping/smd_feeders This model is used for…
This things demonstrate how an OpenSCAD module can be used to eliminate the Elephant's Foot affect when designing and printing a 3D object. The module, which you can copy and paste to your own OpenSCAD scripts, insets the one or a few…
Edit: Sep-19-2016: changed the design to metric. This is a super duper hanger for the Flashforge Creator Pro and similar printers. This design has a few advantage Bearings based, virtually zero friction. Easy to mount and remove the…
The famous cubes-on-elastic-string puzzle, now customizable on your 3D printer. Either print the provided STL or customize it the way you fancy it. Printing is easy, no support or post processing required and the chamfer at the bottom…
Customized version of http://www.thingiverse.com/thing:915435 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=915435 Instructions Using the following options: BlockSize = [10,10,10] ReverseLabelOrder = 0…
This is a top handle for the Improved Dome for Flashforge Creator Pro thing http://www.thingiverse.com/thing:1194887 . It makes it easy to remove and place the dome using one hand. This thing was designed by customizing the parametric…
(for a handle for this dome please see thing http://www.thingiverse.com/thing:2325371 ) (note: more information about the filament guide tube holder I use with this dome can be found here http://www.thingiverse.com/thing:1167693 ) Update…
These are disposable mounting tab for 1.3" OLED display such as the Heltec models that can found on ebay. The are inserted between the display and the main PCB are riveted with the side of a hot solder iron. The model is customized but…
A case for the resistor decade board from http://gerrysweeney.com . Includes OpenSCAD source code. Can be printed in PLA or ABS. Use with four M2.5 x 8mm screws (no need for nuts, just screw into the plastic). Printing is straight…
This is a cover for an Astro Flight 2 pin female zero loss connectors. These are great connctor (though not cheap) for RC batteries. I used the cover to protect that connector from dirt and from unintentional short. To tweak the fit, use…
GOJO soap dispensers such as LTX-7 use a plastic insert to enable the two front panel release buttons. This allows to open the cover without the need of the opening tool similar to thing 3287729. If you lost yours, print this thing, open…
(see here a related thing: http://www.thingiverse.com/thing:1200876 ) This customizable add-on funnel improves the interface between the Flashforge extruder and the filament guide tubes, and helps keeping the guides in place, especially…
Here is a challenge that will put your 3D slicer and printer to the test and can improve the quality of your PLA prints. Print the pla_cooler_test1.stl model using PLA and no support material . Optimize the setting of your slic3r and…
This is an OpenScad parametric design for a screw based micro adjustable Z stop for the Makerfarm's Prusa I3v. It works great on my machine but if you want to change it just tweak the parameters and recompile in OpenScad to generate the…
This puzzle has two identical pieces that lock into each other in a cross pattern and the challenge is to separate between them. You will need four metal pins with 4mm diameter and 35mm length such as the ones here…
Adding this thing to the corners of your Makerfarm's Prusa I3v hotbed simplifies the hotbed leveling. It prevents the lock nut from rotating so you can use one hand for the hex wrench and the other to check the height with your shim of…
NEW: see the PLA Cooling Challenge http://www.thingiverse.com/thing:627590 PLA layers need to cool before the next layer is printed. If the layer is small (that is, doesn't take too long to print), it may still be warm and soft when the…
I am using these clips to prevent the Z nuts on my prusa i3v from coming out of their nut trap. This make sures that the the two z elevators stay in sink. The clip provide a few millimeters of vertical play in case your z stop is too low…
(To customize this design click on the Open In Customizer link here) This bracket is attached to the left side of stock Makerfarm Prusa i3v extruder and it is used to cool the workpiece layers before printing the next one. This improve…
I love my Prusa i3V but the stock spool holder leaves much to be desired. It obstructs the access to the SD card, it makes strange noises with some spools replacing spools is a hassle due to the design of its cross member and its height…
This little tool make it easier to change filament. Pull the extruder tab with one hand, insert this tool as shown in the picture and release. Now you are free to remove or insert a filament. Remove the tool before printing. The default…
These are all currently available results.
