Counting matching models…
NEW VERSION!!: https://www.printables.com/model/803435-new-bearing-less-ps4-controller-mini-wheel Based off of these two models: https://www.thingiverse.com/thing:4498704 https://www.thingiverse.com/thing:3062713 Print screw at 100%…
COMPATIBLE WITH ORIGINAL MODEL: https://www.printables.com/model/757232-bearing-less-ps4-controller-mini-wheel/files Based off of these two models: https://www.thingiverse.com/thing:4498704 https://www.thingiverse.com/thing:3062713 Print…
UPGRADED EASIER BOX OPENER - TESTED Easy to use, easy to print, all with less filament use! Upgraded with stronger tip!
A prosthetic to put on the end of your right hand to give you 6 fingers. Used inMoov pinky for finger. Print everything except “builtinring” with no supports. Use filament for the joints. Other items needed: Elastic bracelet cord Fishing…
Plaque Stand Supports (Easy print, minimal filament)- Print 1 for each end Model printed from PLA
EASIER BOX OPENER - TESTED Easy to use, easy to print, all with less filament use!
22370 Honeycomb FTC Centerstage Claw
Cowboy Hat Hanger! Printed in 2 pieces, and bolted together with M3 bolts! Made for hat size 7 & up!
Easy to print, less filament, and works great! Same concept, all with less filament, and same functionality!
SUPPORTS PICTURED BELOW:
Low-Profile Lug Nut Spike Cover for 22mm Lug Nut to give your wheels some personality. Slides on and stays well with some double sided tape on the lug nut tip. Tested works through car wash, highway driving, and various climates. Picture…
Offroad Chevy Concept Model- a concept for a truck I'd like to build. The wheels spin :) Used base body from this model: https://www.printables.com/model/692030-2021-chevy-colorado-zr2/files Used this front bumper (with a couple…
Offroad Chevy Concept Model- a concept for a truck I'd like to build. The wheels spin :) Used base body from this model: https://www.printables.com/model/692030-2021-chevy-colorado-zr2/files Used this front bumper (with a couple…
22370 Honeycomb FTC Centerstage Claw v3 (Adjusted)- given more space, first model fit, but was too snug. Made more room.
Converts goBilda 312 RPM Yellowjacket motor with a 17 tooth spline mount to a 6000 RPM motor, useful for flywheels. Print no supports, should be a snug fit. To install- remove 8 screws and take off black gearbox cover. Remove all the…
Uses micro servo, bend sensor, and Arduino Nano to power the ligament for the finger. EXTERNAL PARTS USED: Arduino Nano MG90S Micro Servo SpectraFlex Flex Sensor by Spectra Symbol (55mm) HUION Artist Glove Fishing Line (Braided 60lb) 10K…
22370 Honeycomb FTC Centerstage Claw. Instead of stacking pixels vertically, they are held horizontally.
Centerstage pixel with 22370 Honeycomb branding.
Simple Note Card Holder for 3 x 5 in note cards
22370 Honeycomb Carabiner Hook for Rig Hanging FTC Centerstage To lift bot up in centerstage- uses 50% infill
Glue holder for your A1 in case your bed needs that extra adhesion!
20741 P@TWD FTC Centerstage Claw- made in collaboration with team Honeycomb 22370
22370 Honeycomb FTC Centerstage Claw w/Bee Topper
Pixelated 20739 Inlay Numbers- to print the background and numbers different colors without having dual extrusion
Pixelated 20739 Bumper Bracket (0.3in Adjusted)
Pixelated 20739 Hook for Linear Slides
Pixelated 20739 Bumper Bracket Mech Limit Extension- to make it a little bit taller.
Specifically made for FTC 22370 robot '23-24
Pixelated 20739 Bracket
Pixelated 20739 Bumper Bracket Mech Limit
Pixelated 20739 Arm Connector Bracket
Pixelated 20739 Mechanical Limit for Arm
Updated Pixelated 20739 Mechanical Limit Use split model into parts feature in slicer to separate and print easier
Pixelated 20739 Arm Connector Bracket V2- the "Stick". Print in PETG 100% infill.
FRC Perseverance 9444 Logo Button- a parody of NASA's Perseverance Logo
Pixelated 20739 Bumper Bracket fixed for the third time
Pixelated 20739 Mechanical Limit V2
Pixelated 20739 Bumper Bracket (Strengthened) V3
4 stage spintake using 1/8ID 3/8OD tubing (https://www.andymark.com/products/1-8-in-id-3-8-in-od-black-surgical-tubing) and standard REV parts. Printed in PETG. Used epoxy, brackets (mounted on the underside), and 3M double sided tape…
Small Drone Prop Guards- Printed and assembled easily with superglue. Used on my SX19HF drone. Works with small drones. Glue frame to collar slots using superglue, outer slides onto the frame spikes.
22370 Honeycomb FTC Centerstage Claw with Bee Topper. Instead of stacking pixels vertically, they are held horizontally.
These are all currently available results.
