1 / 2
goBilda 312 RPM to 6000 RPM Converter for FTC (17 tooth spline mount)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Converts goBilda 312 RPM Yellowjacket motor with a 17 tooth spline mount to a 6000 RPM motor, useful for flywheels.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 56
- Makes
- 0
- Views
- 264
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Public Domain
Converts goBilda 312 RPM Yellowjacket motor with a 17 tooth spline mount to a 6000 RPM motor, useful for flywheels. Print no supports, should be a snug fit.
To install- remove 8 screws and take off black gearbox cover. Remove all the planetary gears in the 312 RPM motor, leaving only the base gear connected to the motor, and the 3 prong output receiver. Connect the mating surfaces, and bolt everything back up.
IF YOU WANT THE MODEL TO PRINT FOR THE 11 TOOTH GEAR SPLINE CHECK THIS LINK: