goBilda 312 RPM to 6000 RPM Converter for FTC (17 tooth spline mount)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Converts goBilda 312 RPM Yellowjacket motor with a 17 tooth spline mount to a 6000 RPM motor, useful for flywheels.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 56
- Wydruki
- 0
- Wyświetlenia
- 268
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Public Domain
Converts goBilda 312 RPM Yellowjacket motor with a 17 tooth spline mount to a 6000 RPM motor, useful for flywheels. Print no supports, should be a snug fit.
To install- remove 8 screws and take off black gearbox cover. Remove all the planetary gears in the 312 RPM motor, leaving only the base gear connected to the motor, and the 3 prong output receiver. Connect the mating surfaces, and bolt everything back up.
IF YOU WANT THE MODEL TO PRINT FOR THE 11 TOOTH GEAR SPLINE CHECK THIS LINK: