Counting matching models…
The original finecoar Grind Setting Dial V2.0 for all new Eureka Mignon grinders Now also compatible with all* new Eureka Mignon models! For more information, please continue reading under Compatibility. If you'd like to buy a finished…
Design The base is tilted by 14 degrees, which enables the optimal ejection of ground material. The tilting angle also helps to remove all the grist from the grinder. In addition, clogging of the chute is prevented. There is a platform at…
The updated original finecoar Grind Setting Dial V2.1 for all new Eureka Mignon grinders Print if yourself?! The finecoar GSD V2.1 is fully open source under CC BY-NC 4.0 DEED and the printable files are available on Printables and…
Design The Eureka Mignon is a fantastic coffee grinder for espresso or Aeropress as well as filter coffee or French Press. It has only one flaw: The grind is well adjustable, but not well READJUSTABLE. The dial can be adjusted over…
When evaluating the surface finish of untested filaments, this test id for you. Especially when printing with matte materials, the flow (or in this case the speed) is defining the finish and how glossy/matte the surface will be. This test…
Simple and flush sitting wall adapter for Würth M-Cube batteries
Design This 60mm single dose hopper for all newer Eureka Mignon models (Specialita, Manuale, Silezio, Facile, Filtro, Puristico. XL, Perfetto and Libra compatibility isn't tested, if you have any questions feel free to contact ) allows,…
Design This plug covers the hole created after the portafilter fork has been removed to grind into a cup or similar. If you'd like to buy a finished product visit my newly made store :) Details Uses the original screw that came with the…
Design This 100mm single dose hopper for all newer Eureka Mignon models (Specialita, Manuale, Silezio, Facile, Filtro, Puristico. XL, Perfetto and Libra compatibility isn't tested, if you have any questions feel free to contact ) allows,…
This is a generic housing for a widely available 1.3" OLED display and a KY040 rotary encoder. The display is fixed in place by four M3 screws and the main plate gets fixed in place by two screws from each side (also M3).
More magnets over at the Fridge Magnet Collection ! Hardware needed : 20x2mm round magnet Visit www.finecoar.coffee :) Print settings : 0,2 / 0,16 mm layer height 10%+ infill Arachne is helpful, but not a must Thick bridges Ironing on top…
You'll need 5mm EL wire for this sing. There are plenty of videos on YouTube on how to wire EL wire, it's pretty straight forward.
This model utilizes 5mm EL wire. It can be terminated in a small chamber with the provided cap.
Designed to accomodate 5mm EL wire. Small inverter is required. Print one of everything, but the pin. Cable routing holes are there.
This model consists of 2 parts: the frame and the tile. There are 2 tiles: one a little proud and level with the frame and on just flat. The proud one is meant for 14x30mm labels , the flat one can be edited so you can print the lettering…
The box utilizes embedded magnet while printing, you need to program the pauses in the slicer or printer. The box uses two 20x2mm magnets in the base and four 6x2mm magnets in each the main body and the lid. I used fuzzy skin on the main…
Thick, robust handle for 3030 extrusions. Mounts with two M5 bolts and T-nuts each. Category: 3D Printer Accessories
More magnets over at the Fridge Magnet Collection ! Hardware needed : 20x2mm round magnet Visit www.finecoar.coffee :) Print settings : 0,2 / 0,16 mm layer height 10%+ infill Arachne is helpful, but not a must Thick bridges Ironing on top…
This is a slimmed down version of the original model, utilizing the original hardware
More magnets over at the Fridge Magnet Collection ! Hardware needed : 20x2mm round magnet Visit www.finecoar.coffee :) Print settings : 0,2 / 0,16 mm layer height 10%+ infill Arachne is helpful, but not a must Thick bridges Ironing on top…
More magnets over at the Fridge Magnet Collection ! Hardware needed : 20x2mm round magnet Visit www.finecoar.coffee :) Print settings : 0,2 / 0,16 mm layer height 10%+ infill Arachne is helpful, but not a must Thick bridges Ironing on top…
More magnets over at the Fridge Magnet Collection ! Hardware needed : 20x2mm round magnet Visit www.finecoar.coffee :) Print settings : 0,2 / 0,16 mm layer height 10%+ infill Arachne is helpful, but not a must Thick bridges Ironing on top…
More magnets over at the Fridge Magnet Collection ! Hardware needed : 20x2mm round magnet Visit www.finecoar.coffee :) Print settings : 0,2 / 0,16 mm layer height 10%+ infill Arachne is helpful, but not a must Thick bridges Ironing on top…
More magnets over at the Fridge Magnet Collection ! Hardware needed : 20x2mm round magnet Visit www.finecoar.coffee :) Print settings : 0,2 / 0,16 mm layer height 10%+ infill Arachne is helpful, but not a must Thick bridges Ironing on top…
More magnets over at the Fridge Magnet Collection ! Hardware needed : 20x2mm round magnet Visit www.finecoar.coffee :) Print settings : 0,2 / 0,16 mm layer height 10%+ infill Arachne is helpful, but not a must Thick bridges Ironing on top…
More magnets over at the Fridge Magnet Collection ! Hardware needed : 20x2mm round magnet Visit www.finecoar.coffee :) Print settings : 0,2 / 0,16 mm layer height 10%+ infill Arachne is helpful, but not a must Thick bridges Ironing on top…
This is a better version to mount the original Orbea Terra mudguards in the rear. Utilizes the original hardware (M3 and M5 screws)
More magnets over at the Fridge Magnet Collection ! Hardware needed : 20x2mm round magnet Visit www.finecoar.coffee :) Print settings : 0,2 / 0,16 mm layer height 10%+ infill Arachne is helpful, but not a must Thick bridges Ironing on top…
More magnets over at the Fridge Magnet Collection ! Hardware needed : 20x2mm round magnet Visit www.finecoar.coffee :) Print settings : 0,2 / 0,16 mm layer height 10%+ infill Arachne is helpful, but not a must Thick bridges Ironing on top…
More magnets over at the Fridge Magnet Collection ! Hardware needed : 20x2mm round magnet Visit www.finecoar.coffee :) Print settings : 0,2 / 0,16 mm layer height 10%+ infill Arachne is helpful, but not a must Thick bridges Ironing on top…
These are all currently available results.
![[finecoar] Grind Setting Dial V2.1 for Eureka Mignon](https://media.printables.com/media/prints/777304/images/6039888_4ce2cf05-2e19-4e57-b1fe-74c1b6c4f185_63bb1ffc-94d1-4e5a-895f-4ec86adb5f53/right_round.jpg)
![[finecoar] La Marzocco Fridge Magnet, Trinket, Badge](https://media.printables.com/media/prints/766202/images/5982859_b75ce2b1-9c05-4248-aea9-dadf4f05b914_4b3ff1a7-3289-4fac-925d-2861b75a2782/p1040377.jpg)
![[finecoar] Eureka Fridge Magnet, Trinket, Badge](https://media.printables.com/media/prints/766190/images/5982916_b0532470-8655-451d-a24d-04739851fae7_985bb9d2-171e-4901-879a-d2faf5336491/p1040381.jpg)
![[finecoar] Mazzer Fridge Magnet, Trinket, Badge](https://media.printables.com/media/prints/767835/images/5982823_24528a9a-a448-4334-bfb7-402c6bf1a946_bc863d61-c505-4593-8870-b9b0c2f83db2/p1040382.jpg)
![[finecoar] Gaggia Fridge Magnet, Trinket, Badge](https://media.printables.com/media/prints/766199/images/5982885_67165184-6c37-4c47-a3ed-25a0bef7cafa_286a82cc-2297-41d3-a4f1-24690671bc70/p1040378.jpg)
![[finecoar] Rocket Fridge Magnet, Trinket, Badge](https://media.printables.com/media/prints/767839/images/5982804_0ad3b702-608d-4185-84e4-8ff7c7198fb2_bfb134b0-37e2-409c-bf98-80505ed5c3c2/p1040383.jpg)
![[finecoar] Lelit Fridge Magnet, Trinket, Badge](https://media.printables.com/media/prints/767819/images/5982847_06342cb6-5163-44a8-b849-1e627a4129b4_20bb7583-155e-4354-be57-0393f5515ec0/p1040379.jpg)
![[finecoar] Niche Fridge Magnet, Trinket, Badge](https://media.printables.com/media/prints/767833/images/5982839_66078e0d-d1ec-449e-b799-612c0265e676_249f24a6-1ec6-49f0-bf4c-6ab61fe3f502/p1040380.jpg)
![[finecoar] ECM Fridge Magnet, Trinket, Badge](https://media.printables.com/media/prints/766061/images/5982864_9c70ff66-6d52-4e13-b1bf-5b9580317063_780aa5e2-6121-47c9-9bbd-193a05cf52dd/p1040372.jpg)
![[finecoar] Rancilio Fridge Magnet, Trinket, Badge](https://media.printables.com/media/prints/767829/images/5982933_71bae0ea-5b30-47ce-aed0-57b191b38ae2_c223f6c2-b183-43d3-b8c2-f40828d4d3b7/p1040376.jpg)
![[finecoar] Sage Fridge Magnet, Trinket, Badge](https://media.printables.com/media/prints/767841/images/5982701_cd00f2b6-9bc5-40e0-8124-1c830cae8046_9bf4baf9-8e13-42d8-8341-df71c1f8822c/p1040373.jpg)
![[finecoar] Flair Fridge Magnet, Trinket, Badge](https://media.printables.com/media/prints/766197/images/5982907_ba2180cb-75e7-4bd9-8d19-2db0cd219ba9_33f2dba7-df36-43e3-8bba-a3b9c6c620b6/p1040375.jpg)
![[finecoar] finecoar Fridge Magnet, Trinket, Badge](https://media.printables.com/media/prints/766193/images/5982872_cd8a9742-df18-4fdb-97cd-e5c3450b0cb7_7cf8e0b5-8662-41a0-8329-1b785f8cace4/p1040374.jpg)