Counting matching models…
This is a riser for the Creality K1, inspired by the speed and noise of the K1, I decided to call it Nu-K. The riser is printer upright and with tree support for the grids. The grids for the ventilation are with M3 screws and 12mm large.…
This mod allows you to use a side spool holder or print directly from a filament dryer, even from the back or side of the printer. There is no need to change the filament sensor cable or make any other mechanical changes. You will need…
This is the first one you need to print to use the riser mod. There are two different mods, one completely closed and the other with adjustable grids. To print it you can put all the corners together, no supports are needed. The…
Update 16.10.2023 a new version with the direct guide is included to make the job of change filament easy. Update- 05.12.2023, i just add a rotative tool for the PTFE guide and two exit for the filament one on the top and one on the side,…
print without supports and at least 25% infill :) to assemble you can reuse the two screws from the side and you will need one 5/8mm screw for the back. if you decided to print, upload your make to see what colours you choose :D
You can print it vertically/diagonally. I used PLA with 5% infill and 3 walls, but you are free to print however you like. The corners for the Riser you can find here: https://www.printables.com/es/model/514703-nu-k-and-d-riser-corners If…
Gcode ready to print, to test temperatur lvl of artillery. from 220 to 180 °C Print Settings Rafts: No Supports: No Resolution: 0.2 Infill: 10 Filament: everyone PLA, PLA+ Notes: just connect and print. Category: 3D Printing Tests
To print i used pla, you need to turn the stl face down to print it. 3 walls and 20% infill. use supports for between the spyglass
I did this mod to make the eddy slimmer to fit in my toolhead.
Tras adquirir una genius de 2 mano me di cuenta que el z mod de fábrica es absurdamente malo. El diseño esta pensado para usar el coupler de artillery pero si queréis montar las tuercas anti backslash tambien podeis ya que deje libremente…
A really atractive and easy design who brings the most perfect combination of style and storage. Print Settings Printer: Genius, X1 , ortur Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 Infill: 20 Filament: everyone - Notes: easy to…
spool holder for Artillery, just print and assemble it! i took out one roller of each side than i can reuse in another project. after taking out the roller just assemble the screw normally and put the spool holder. it gona make click when…
I I printed it with Pla+, but you can use another type. a support for the bed is necessary. i have used 100% infill ( only 8g filament). For the assembly you need: one M2x 6 or 8 and one M2 nut. two M3 x8 and two M3 t-nut 2020 I have not…
i just bought a genius and was with the hot bed cable broken... so i decide to change the position to optimize the space and the look of the printer. i was searching in Thingiverse couldn't find anything so i saw one in 3d cult and decide…
two different holders for the z sensor(endstop) artillery. easy to install and you can adapt the high of your nozzle- bed you just need: m3 nutt m3 x16 screw m3 washer Print Settings Printer: artillery Rafts: Doesn't Matter Supports: No…
feel free to modify and improve the design if needed ;) Just remmember to share and comment.
cable clip for ptfe tube and cable to toolhead. i use it with cable tie 9mm
These are all currently available results.
