P
PrintablesThomas Leftwite
Venus de Milo
Very good 3D data in STL format. My print condition: Layer height: 0.16mm Support: tree Print Speed: 80mm/s nozzle: 0.4mm material: PLA temp: 200degC/65degC infill: 20%
- Downloads
- 1,109
- Likes
- 294
- Rating
- 4.94
All models
Counting matching models…
P
PrintablesThomas Leftwite
Soldering Vise
Feature Jaw span 100 mm, width 50 mm, height 30mm - Enough size to hold small PCBs. Vise cap is changeable when it is damaged or worn out. Also you can choose the shape and material of the vise cap ex) flat-face, slots-face, PLA, TPU,…
- Downloads
- 448
- Likes
- 84
- Rating
- 5
P
PrintablesThomas Leftwite
Arduino UNO R3 Case
Arduino UNO R3 Case. Good for 0.96inch OLED and 4 6mm square push SWs. I/F cable space at the back. There is a slit for heat exhaust on the top.
- Downloads
- 243
- Likes
- 36
- Rating
- 0
P
PrintablesThomas Leftwite
Magnifying Glass Stand
Four M4-20~25mm screws are required. Grip adapter should be modified for your own magnifying glass. Still needs to improve the design: Screw tip should be larger to secure the base stable. Knobs should be larger for the easy operation.…
- Downloads
- 153
- Likes
- 25
- Rating
- 0
P
PrintablesThomas Leftwite
Cable Clamp
Simple Cable Clamp. Fits for 4 mm dia. cable.
- Downloads
- 131
- Likes
- 13
- Rating
- 0
P
PrintablesThomas Leftwite
Lithophane Stand
There are some good sites to make lithophane from your own image: Its Litho Lithophane Maker Image to Lithophane This stand is for the Flat Lithophane 100mm width and 4mm thickness. Its size is 120mm x 30mm x 9mm. The sloped slot provides…
- Downloads
- 118
- Likes
- 14
- Rating
- 0
P
PrintablesThomas Leftwite
Ender3 S1 Pen Plot - Pen Holder
The Pen Holder consists of three models - Base Bracket, Slide Holder, and Stopper. You can 3D print Slide Holder and Stopper in place - refer to the photo attached. Merit of this pen holder: Easy to make - the Pen Holder doesn't need any…
- Downloads
- 116
- Likes
- 9
- Rating
- 0
P
PrintablesThomas Leftwite
Ender3 S1 Inner Tray
Yet another inner tray. I designed the best layout for me.
- Downloads
- 114
- Likes
- 18
- Rating
- 0
P
PrintablesThomas Leftwite
Tissue Paper Box Holder
You can hold tissue paper in the paper box or kitchen paper in the plastic bag with this holder. I can print this model without supports, but there's a LONG BRIDGE so that you may print it with supports if you worry about it. You can…
- Downloads
- 101
- Likes
- 11
- Rating
- 5
P
PrintablesThomas Leftwite
SD Card Holder, Micro SD Card Holder, and Card Holder Case
3 SD Cards Holder and 12 Micro SD Cards Holder. You can stick the tape and leave notes on it. The case can keep 12 SD Cards and 12 Micro SD Cards. The card holder is the same size as a credit card. So you can use the other credit card…
- Downloads
- 83
- Likes
- 13
- Rating
- 5
P
PrintablesThomas Leftwite
Cardboard Trashbox Clip
Simple and easy to print. Infill 20%, no support. You need to print four parts. Very easy to make: Raise the top of the cardboard box Cover with a garbage bag Attach the clips It has holes that can be pinned if desired.
- Downloads
- 73
- Likes
- 33
- Rating
- 5
P
PrintablesThomas Leftwite
Ender3 S1 Caliper Holder for Bed leveling
You can use the digital caliper with zero reset function for the bed leveling. You can finish the gap adjustment perfectly just once.
- Downloads
- 57
- Likes
- 12
- Rating
- 0
P
PrintablesThomas Leftwite
Kaen Doki - Flame Rimmed Pottery
Related wiki page <https://en.wikipedia.org/wiki/File:Kaen_doki.stl> The bottom of the pottery isn't flat so that I recommend lowering the model a bit before slicing. Print condition (reference): layer height: 0.2mm nozzle: 0.4mm support:…
- Downloads
- 38
- Likes
- 5
- Rating
- 0
P
PrintablesThomas Leftwite
ASUS Zenfone 5 Cover
My first print of TPU, results better than I expected. Nozzle 210 deg ( bit higher was better), Bed 50 deg (heating may not be necessary), retract 3 mm, speed 50 mm/s, line width 0.44 mm, layer height 0.2 mm. No adhesion, Glue on build…
- Downloads
- 29
- Likes
- 1
- Rating
- 0
P
PrintablesThomas Leftwite
Case of weather logger
I made the weather logger with ESP32, and i made the case for it.
- Downloads
- 17
- Likes
- 1
- Rating
- 0
P
PrintablesThomas Leftwite
Trellis3DChallenge
This is an inspired work from the video of Youtube channel @TinkercadWorld-ho8ht, Tinkercad Challenge! Turning A 2D Image Into A 3D Model! Intricate Incense Burner! New! I tested TRELLIS3D > ASPOSE3D path to compete with his work. The…
- Downloads
- 5
- Likes
- 0
- Rating
- 0
These are all currently available results.