Counting matching models…
Plugs for original wall-attaching inserts can be rotated while pushed into the inserts. And I didn't like it at all :) So I designed a version that will always be in the correct position. Designed for ~4 mm diameter countersunk screw.…
I completely remade the holder but used the original as an inspiration. Watch out, dimensions are probably different and therefore not compatible with the original. The original design by @kitlaan had "lips" that interlocked together to…
HSW insert with M3 square nut and gluable plug for securing the nut permanently in place. Use DIN 562 M3 nuts. Dimensions should be around 5.5 mm (side to side) x 1.5 mm (height). Insert the nut into the base , apply superglue as far away…
Empty HSW insert with top groove removed provided as Fusion 360 and STEP files for easier remixing.
3D-printed screws and threads are not perfect and also not very sturdy, even when printed with more perimeters and increased fill. Therefore I've designed this bolt and nut where a real steel M5 nut and M5x20 hex-head screw are used.…
Recently I was in need to mark my WAGO terminal blocks, but I didn't want to buy WAGO's markers because it requires a special printer and can be bought only as a quite large coil. This is not the exact copy of WAGO's WMB marking as the…
This is just a simple press-fit HSW insert for a zip tie. Currently, there are two hole sizes, one 6 mm wide and the other 3 mm wide. Providing Fusion and STEP files for easy modification.
Double and triple Loxone Mounting Brackets (https://shop.loxone.com/enen/mounting-bracket-double-silver.html, https://shop.loxone.com/enen/triple-mounting-bracket-silver.html) have non-standard box spacing of 98 mm. Installing three…
There are two versions, one with holes for M4 bolt and one with holes for M5 bolt. I have included hammer nuts for both M4 and M5 bolts. Real steel nuts work better of course.
This is a simple Honeycomb Storage Wall mount for the Panasonic BQ-CC65 battery charger. To mount it, you'll need two M3 screws and either two original inserts with M3 nut or my variant of the inserts that use square nuts…
Inspired by the work of user @Stepa_176595 , I've created my own version of the ring, but admittedly, without his work's fantastic “surface print”/"vase mode" properties. Check out his model and the magic behind it:…
Designed for a maximum of 10 coasters with a diameter of 95 mm and a thickness of 3 mm. However, the maximum number of coasters can be adjusted by scaling the connector model directly in the slicer. The coasters for this holder can be…
Just a few simple geometric coasters. The diameter is 95 mm and the thickness is 3 mm. Print face down and let the printer make bridges. It looks great, and the top face stays nice and flat. The holder for the coasters can be downloaded…
Loxone sells its own 7" ceiling speaker ( link ) which you can and should install into the special back box ( link ). The problem is that if you plan to make only preparations for the speakers and not actually buy them, you end up with a…
This simple remix makes the Side LED Light Bar 5 centimeters longer. Because size matters!
These are all currently available results.
