Counting matching models…
Do you have the following printer errors when printing with the AMS? Failed to pull out the filament from the extruder Failed to feed the filament into the toolhead Well, give this little mod a try! In my case, I found the most common…
OrcaSlicer (Bambu Studio SoftFever) Profiles for X1 Carbon These are my tweaked/tuned profiles for the X1 Carbon. They are not designed for Bambu P1P printer but may work on it as well, use at own risk. UPDATE LOG CAN BE FOUND ON THE…
Bambu X1C Exhaust Muffler / Fan Silencer Work in process. Updates will be posted below. Features: Make the printer quieter by muffling the noise from the extremely loud rear exhaust fan. Using air baffle design, minimize noise while…
This is an old design and has now been replaced by The SENATE Check out the new design here: https://www.printables.com/model/513350-the-senate-ams-feeder-button-and-protector-for-bam This is a remix of Bambu AMS Feeder PFTE Adapter by…
Updates: 2/23/2021 - NEW v2 MODEL! Increases overhang length, makes the cones more pointy, adds support to the microcylinder on the left so it does not wobble and cause false testing, and also adding some other new windows and holes. Also…
The SENATE - amS feedEr buttoN And proTEctor for Bambu AMS System Look at me mom, I used another stupid acronym. I was not happy with all the AMS Feeder Protector Button things out there, they all had flaws and strengths, including my own…
NOTE: This design has been superseded by my latest remix: https://www.printables.com/model/338073-bambu-x1-ptfe-extruder-bracket-ams-error-fix I believe the one above to work better! But if the one above doesn't work for YOU, it may be…
I call this the "Instant" version of a Y-Splitter, because it requires no separate purchase of Bowden connectors, just print all necessary parts! Basic Features: No extra parts needed, click and print. PTFE tubes held in place securely by…
I remixed xander1's remixed design of the beefier Y-Motor Mount to make a few changes: (all credit goes to xander1 and teookie for their original sturdier design that incorporates the end-stop) Increased width of the motor mount by 1.6mm…
Wood grain stamp. For paint, putty, playdough, whatever. _________________________________________________________________________________ I like to modify my printer parts, trying to make them better. Take a look at some of my other…
The higher you print it, the heavier it gets! Test your bed adhesion with this. Play with your fan speeds, your heat settings... see what works! The higher it prints, the more it pulls on the bed. Measuring gauge on side in 25mm steps.…
My take on a magnetic purge / poop bucket for the Bambu Lab X1C. This may also work on the non-carbon version (X1) however I do not know if the back of that is also metal or just plastic. I have designed this to accept magnets, so the…
Sometimes simple is better. This is my attempt to make better Z-Axis Tops for the MK3/MK3S(+) printers on the stock frame. This is remixed/based off of Prusa's own latest R2 design of the Z-Axis Tops. Here's what's different: Fully opened…
This is feet (legs) for the Insta360 invisible selfie sticks, remixed from Mini Tripod 150mm by DiAleksi. With this, you can give your invisible selfie stick (monopod) feet so that it can stand the Insta360 camera upright. I use this for…
Battery terminal covers for LiFePO4 batteries that typically use an M8 bolt on the battery terminals. I recently built a battery bank for my RV consisting of (3) 100ah LiFePO4 batteries I purchased on Amazon. They are great batteries,…
Give a gift card to someone, with it in jail! A great prank to make it harder for your friend (victim) to open their gift card. When it's printing, drop the gift card in before the extruder gets to the top bridging layers.…
This allows you to put the ASUS ZenWiFi Pro ET12 on the wall. It is designed for the ET12 to drop into the wall mount and the ET12 will not move around. There is enough space in the back for cables. Print Instructions: Print strong in…
A mini baseball bat, with 2 pieces that can be printed separately and screwed together with a built-in thread. Once screwed together it is 12.5 inches (317mm) long. Designed this as a mini-baseball bat for toddler photo session prop. If…
So you want to know what fan speed is best? You can test optimal print fan speed with this tower. You MUST use newest PrusaSlicer and use the fan speed settings in the photo, slice at 0.2mm layer height. I recommend using a large brim…
Why spend $6 on Amazon when you can print your own for $0.15? lol.
D.R.O.P.P.E.R. Durable Rapid Object for Painless P.I.N.D.A. Easy Re-Positioning Simply drop your P.I.N.D.A. down onto this tool for the perfect (?) P.I.N.D.A. position. To be honest I don't know if it's the perfect P.I.N.D.A. position,…
Print extension sticks for your DJI Smart Controller! Extra length = better accuracy when controlling drone or gimbal movements. These fit directly on top of your existing sticks, with a snug fit. Can be removed and put back on later for…
This is a design to make a nozzle change tool for the E3D v6 nozzles. It will let you easily remove and add the nozzles better than the manual spanner and much quicker to use. This STL is just for the handle, you will still need some…
A short, stubby 810 drip tip. Comes in two variants, a regular one and one with a "mesh screen" in the bottom to filter out ejuice “spit”. Fits well on my Geek Vape Z tank. You may have to scale it up or down 1% to get a perfect fit. I…
Allows to turn the spool winder with a power drill / driver. Print strong! Minimum of 5 walls, 30% infill. I recommend PC or PA material, PLA will tend to break in the drill. PETG may work.
Bambu Hex Key / Allen Wrench Handles Handles for the two most critical hex keys (wrenches) the Bambu printers use for maintenance: 1.5mm and 2.0mm. I found that just using the included hex keys was kind of annoying and could use a nice…
These are two quilling tools for rolling paper. There are two sizes. One is for standard paper, the other one is for thick cardstock paper up to 0.50mm thick. Print with 0.40mm nozzle, 0.20mm layer height, and add a small brim if you are…
P.E.R.C.E.I.V.E. - Pinewood dERby Car mEasurIng deVicE This is a simple yet accurate tool for your boy or girl scout to measure their pinewood derby cars. It is sized for U.S. Pinewood Derby regulation. This has slots that require 1/16"…
With this design you can use a 3.5" Raspberry Pi touch screen to install something such as OctoDash on your Pi and control your prints from that. Remixed from 3.5" Touch Screen Mod for Prusa Mk2/2s/3/3s by darksid3r…
This is a printable nozzle holder case that can hold up to 20 nozzles, for the man or woman that has lots of nozzles. This is inspired off of the E3D Nozzle Holder by 3D previews . FEATURES: Holds up to 20 nozzles. Indented separator…
The Bondtech MK3S Mosquito Extruder requires a 4mm outer diameter 19.7mm long PTFE tube if you are using the new Mosquito v2 hot end that has the wider and shorter heat break (dark colored heat break). Bondtech includes a 19.7mm PTFE tube…
Bambu Lab Belt Tensioner Retainer Clip for X1, X1C, P1P Some people are accidentally losing these little metal clips on the belt tensioners on the back of the printer, and Bambu Lab does not sell or send spares. So, I designed this which…
I liked all the other filament cutters out there, but they were all designed for the larger snap-off blades and not the mini 5mm ones. The advantages of using the smaller blades is cost - you can usually find the smaller utility knives at…
I made this to mount a 5.5mm endoscope on to my extruder and make a nozzle cam controlled by Raspberry Pi and Octoprint. This rear mounted design is the easiest to install and has the best cable management. Basically it just adds another…
You have MMU2s, but want an easy way to do single color prints without worry about the buffer, filament winders, table-top spool holders, etc. Now, you can re-use stock Prusa MK3s spool holder with your MMU2s for single color prints. To…
My beautiful wife who is also a maker, created and sold Christmas ornaments that had ribbons. She made thousands of them. Guess whose job it was to cut ribbons for them, all at the same length? Me. 😲 Fortunately, I have a 3D printer and…
Decorative Pond for model train sets or other. Simple design but ok for a kid's train set! Surprised I couldn't find anything else like this online.
Cute and stylish mini microphone cover for cheap lav / lapel mics designed for that specific one, may work with others of similar size Prints in 3 pieces Handle snaps together over the mic Handle screws into the printed windscreen…
Show your humanitarian support for the innocent civilians caught up in the current 2023 Middle East conflict, no matter where they call home, with these LED Lightbox flags. Includes: United Nations Flag Israel Flag Palestine Flag…
This tool will allow you to trace baseball lines onto a ball or ball-shaped object. This is made to fit an 80mm diameter ball. Scale up or down in your slicing program depending on the size of your ball.…
This is designed to be printed on the MK3(s+) as two pieces (two prints). You can also fit it onto the Prusa Mini print bed if you scale it down in Slic3r but rendering of the text may not be as good. You must print with 0.40mm nozzle or…
Filament Swatch - Negative Space A filament swatch design that uses negative space for the swatch names, instead of a secondary color, which takes longer to print and is more wasteful. This design also includes a hole in the corner for a…
It's a leg bracket for the PUKAMI Armless Office Desk Chair (Amazon.com office chair). This may work on other office chairs as well, I don't know, lol.
These are all currently available results.
