11 models
Seems like you want to build a Hexapod. Don't know why but since you're here, might as well tell you about the most important features about my design: Cheap: 120 € (see Parts (toBuy) file) RGB: 271 individual RGB LEDs Cable management:…
I made this cyclone separator. It consists of five parts, four of which were 3D printed. The last, the top piece, was made out of acrylic on my CNC router so I could see inside but it can also be 3d printed. In my test it worked…
This machine was designed with the goal of being fully 3d printed. The price for this machine (Excluding control electronics) is about 600$. The frame is made up of 2020 and 2080 extrusions. The motion is handled by MGN15H linear rails,…
Securing material to your cnc can be hard but it doesnt have to be. As long as you have a way to secure this clamp to your cnc (using M6 hardware) securing material becomes easy. You will need a M5 10mm screw to attach the two sections…
Not much to say. It's a simple clamp set to attach things like wood to your machine. You will need M5 hardware. Print settings: Layer height: 0,2mm Outer walls/perimeters: 5 Bottom layers: 4 Top layers: 4 Infill: 20% No supports
Do you have a problem with lose wire? I have the solution for you! This simple cable spool is easy to print and doesn't need any tools. A number of holes makes it easy to fix the cable in place. It has a diameter of 120mm, a width of 30mm…
Get ready to take your DIY CNC router to the next level with these custom aluminum parts! Designed and machined by myself, these components were specifically created to upgrade my 3D printed CNC router (…
This dust shoe is designed to fit a 500w spindle and collect the dust while your CNC is cutting. Thanks to the four 5mmx10mm Magnet removing the lower part becomes very easy. I had to design two versions. V1 is quick to print but it…
Remix of the Lidfinity 33% Less Plastic model that works with x2 wide bins. If you have problems with tolerances, take a look at the fusion file and perhaps change it yourself. I use it to sort all my different screws. However, with the…
Welcome to my first try at a DIY Macropad. While it's far from perfect, it's a start. Building your own is possible, though I wouldn't wholeheartedly recommend it unless you're are willing to make some sacrifices. Hardware My version is…
This is a simple cable manager. You can screw it into a 2040 profile with an M4 screw and a T-nut and thus manage your cables. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Doesn't Matter Resolution: 0.2mm…
These are all currently available results.
