Counting matching models…
Inspired by jurriaanpruis' design , this is modeled to use either screws or large 3M command strips to mount your Unifi Dream Machine to the wall. It has proper ventilation on the bottom to allow your Dream Machine to breath. Includes a…
B&B TECH's original design had an extension that would get in the way when mounting to a RPi3. My remix removes that extension making it compatible with both the RPi 3 & 4. I have also added an access slot for the camera connection. This…
Designed for my Voron v0.1, I wanted to ensure the carbon filter fans where serviceable without having to open the electronics compartment. This snap-in mount holds a 2-pin JST-HX "socket" with a rear channel that allows the wires to…
This is a remix of russross' remix. I found that in the 2 rod 1U design the side structures offered very little extra rigidity and increased print time and support material. After removing those and increasing the 45 degree slope of the…
This is my first 3D model so please be gentle. :) This cup insert replaces the mesh filter sock in a Red Sea aquarium sump. I designed it to be shallow enough to use a coiled strip or wad filter floss that is replaceable without needed to…
This mod allows you to mount your Zerofilter to the inner sides of the Voron v0.1. It was partially remixed to use the great mounting design from the awesome Side Swipe project allowing it to be installed without needing to disassemble…
These are legs/standoffs used to elevate the 3D printed eggcrate I found on Thingiverse . They can be used for frag racks or in my use case, to lift bio filter media off of my sump floor for increased flow. They are designed to be a…
These extended endstop switch mounts replace the stock ones included in V1 Engineering's awesome LowRider v3 CNC . They enable and additional 6mm of vertical adjustment for microswitches with differing lever types.
Extension feet for the Bubble Magus Curve Skimmer. 3 sizes depending on your need. Uses original rubber feet.
When you want to use the very cool Ikea Skadis pegboard on the unfortunately tapered Anfallare bamboo tabletop a shim/adapter is needed to fill the gap. Since this part will be load baring, print it with at least 40% infill and 4 shells…
After buying my Trident I wanted a way to mount it in my very space limited Red Sea E-170 cabinet. This is what I came up with. The wedges are for 8mm glass. If you need a different size, please feel free to remix it as needed.…
NOTE: This is a work in progress and may change over time. Remix Changes: De-themed, removed all easter "badging" (nothing against easter) Passive cooling, removed fan mount and replaced with large vents Expanded stepper motor cable…
Remixed for my Tevo Tarantula Pro. It uses the stock IEC plug and switch assembly. Screws Used: 8-10 x M4 Screws (4 for the PSU mount, 2-4 for the base to frame, 2 for the top mount to frame) 4-6 x M4 T-Nuts (for the frame mounts) 2 x M3…
Mount your Neptune Systems Auto Feeder (AFS) to the Ecotech RMS RX30.
I modeled this because I'm thinking of adding a float switch to my skimmer and didn't want to drill the original. I thought it might be useful to others that have either lost or broke theirs, so here it is. Note: The pictures are of my…
This is a simple quick printing caddy to hold up to 6 Hanna Checker Cuvettes. I store my cuvettes filled with RO/DI water. This keeps them upright and separated in my drawer to avoid scratches that could effect test results.
Modeled this to hold a 9.5 x 9.5-in glass plate to my Tevo Tarantula Pro's heated bed. Slides in between the aluminum plate and the foil insulation and is held in place by the leveling spring tension. Print with PETG or ABS for heat…
The CoralVue Klir Di-4 roller filter will not fit in the Red Sea sump out of the box. This adapter will allow the Klir to slide right in place of the stock filter sock and create a dam that will allow the water level in the drainage…
A while ago, a friend had gifted me his old Drop ALT mechanical keyboard in the form of the PCB and aluminum enclosure parts. He had kept the original diffuser plate for his newly rebuilt ALT. Unfortunately, Drop no longer sells just the…
This is a simple quick printing caddy to hold up to 6 Red Sea water test Cuvettes. I store my cuvettes filled with RO/DI water. This keeps them upright and separated in my drawer.
I'm a big fan of 3M Command Strips. The let me mount light weight things, like Apex modules, to surfaces without having to drill into the mounting surface. With this design, I've been able to mount and then reposition my modules as needed…
After printing the original base for maxstier's Resin Vat Drip Stack , I found that the assembly was a little too wobbly for my 5/16 threaded rod. This remix adds an extension to the back to add stability and counter sunk holes to add…
The Two Little Fishies fluidized media reactor is a cost effective way to implement filtration media like carbon or GFO in your aquarium. However, there are times that you do not need to completely fill the reactor to the top. In this…
Most Hanna Checkers that I have used require a "shake for 2 minutes" step. The Taylor SpeedStir can be used with the correct size stir bar, but if the cuvette is not perfectly centered, the stir bar will just get stuck on one side and not…
These models enable you to mount the RJ45 stepper adapter PCBs from AB2Tech to either your MPCNC Primo trucks or directly to the stepper body with zip ties. These awesome little PCBs let you use 24AWG ethernet cables to attach your…
This is just a simple remix of gdramos' design . I removed the 2 unneeded screw holes to make it a little more aesthetically pleasing. Tested both on my Tevo Tornado and Tevo Tarantula Pro.
This is a remix of my Hanna Checker cuvette adapter for use with Red Sea water testing cuvettes. I found this very useful for titration type tests where you have to add a drop of reagent once a second waiting for a color change. Like my…
This is a remix of mikey5959 filament sensor support for use with the BTT Smart Filament Sensor. Once printed, remove the bottom cover plate from the sensor and screw the mount in from the bottom. I used 5 M3x12 screws, but I think as…
This is a remix of the Raspberry Pi + LM2596 mount from achmed20 . I've made it a little thinner for faster printing. Since it's not a structural part of the printer this should have no effect. I also added a notch near the SD card slot…
These are all currently available results.
