Counting matching models…
21-JUL-2025 UPDATE: Version 2, all models updated. I redesigned the case to use M3 x 5 mm screws to hold the face plates to the PCB. (instead of the previous friction fit) This version is also safe for the micro components that are close…
Bought a Raspberry Pi 5 along with the "active cooler" from Chicago Electronics Distributors and a "GeeekPi N04 M.2 NVMe to PCIe Adapter for Raspberry Pi 5, Support M.2 NVMe SSD 2230 2242 2260 2280" from Amazon. Needed a case, so voilà.…
UPDATE: V2 Case Top has an extra 1mm clearance for the back side of the USB ports. This Raspberry Pi case is for the brand new model 4B. This case is low profile and also features multiple sets of holes on the bottom surface to allow Zip…
A sturdy Croc rivet held together with a DIY paper clip "Cotter" pin. A bit of a pain to assemble but it will hold and last. I had one last for about 8 months, but then I sheared the head of on something in the garage. Probably shouldn't…
I had already printed several Prusa Face Shields and could not source any of the elastic strap material. I had some 3/4 Inch (19mm) Lightweight Polypropylene Webbing lying around so I designed these buckles to fit the RC3 Version of the…
Recently purchased an Orange Pi 5 Plus and needed a case for it. Here's my 1st crack at it. 28-JUL-2024 UPDATE: I modified the front and back panels so that they will no longer come in contact with some surface mount components that are…
I needed a coat hook for my office cubicle and decided I wanted a magnetic one that I could stick to any metal cabinet. It's plenty strong enough for a light weight jacket, and will hold an adult leather jacket as long as you don't brush…
Planning to setup mirrored 2.5" SSD drives in a new media server and needed an adapter to mount them in one 3.5" HDD slot/bay. Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts: No Supports: No Resolution: .2mm Infill: 10%…
I created a custom mounting plate for use with 12 volt round automotive LED lit rocker switches. One of the models has a light bulb and a Fan symbol and the other model is blank. Additional parts & H/W needed : The “Custom light & fan…
I modified the original Raspberry Pi Snug Case by Esquilo to accommodate the new 4 pin power over Ethernet header, and added snap in pegs where the original mounting holes were so the Pi can just snap in, no need for screws anymore. Since…
I bought a "PATROHOO" replacement strap for my Suunto Core watch in 2017 and again in 2019. I wore the first strap completely out but on the second one just the loops or watch band keepers have worn out. So I used FreeCAD to design some…
I designed this case for an Orange Pi 5 Max, but it will probably fit the Orange Pi 5 Ultra as well. I call this a mobile case because it has a place to stow the Wi-Fi antenna when packing it up for a trip. Print Settings Printer Brand:…
Since I was too cheap to buy the optional HEPA filter & fan, lights, switch and external power supply with the Prusa Enclosure, I looked around and found the BentoBox v2.0 air purifier/scrubber system and decided to give it a try.…
Bought some Super Lube for my 3D printer and it was missing the little red bottle cap. So I designed and printed a replacement. Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts: No Supports: No Resolution: .15 mm Infill: 30%…
This Raspberry Pi case is for the brand new model 4B. This case is low profile and the top is designed for mounting a Noctua 40mm fan, it also features multiple sets of holes on the bottom surface to allow Zip ties to be threaded through…
This remixed part allows mounting my custom Light and Fan switch panel to the front of the enclosure at the same height and angle as the xLCD display. I use leftover M3x8 (6) screws and M3nS (2) nuts from my Prusa Enclosure kit. Link to…
1/4"-20 threaded mount for Sony Play Station (PS3) Eye Camera to fit into a camera clamp. See my other designs for a clamp that will work with it. Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts: No Supports: Yes Resolution:…
Wanted a snug case with VESA mounts, so I cobbled together the mounts from https://www.thingiverse.com/thing:922740 onto https://www.thingiverse.com/thing:1637227 . Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts: No Supports:…
Wire management clip for a standard U.S. Folding table with a 21/32" (16.67mm) tabletop. You could probably enlarge it or shrink it in your slicer to fit different size tabletops. I recommend you do the math to estimate the percentage you…
Have owned this Irwin Tap and Drill Set for years, and every time I used one of the drills and taps I would invariably bump the open package and knock all of the taps and drills out onto the floor. Hate is a strong word, but I really…
Since I was too cheap to buy the optional lights, switch and external power supply with the Prusa Enclosure, I looked around and found that I had a leftover strip of 12 volt LEDs that were about 400mm long and an old 12 VDC power supply.…
This Raspberry Pi case is for the new Pi 3 A+ which is Wi-Fi only and has just one USB port. This Pi is perfect for providing a remote web management interface to a 3D printer (I use Octoprint). This case is low profile and also features…
I designed these mounts to zip tie to a standard 1" diameter PVC pipe or wooden dowel (a piece of old rake handle in my case). This DIY DTV antenna works better than the store bought flat flexible square antenna I was using in my attic…
Needed a way to hang a fire blanket deployment bag in the kitchen on the back side of a cabinet door. So I designed a hook that fits the metal ring that comes installed on the bag. Print Settings Printer Brand: Prusa Printer: i3 MK2S…
This is a headphones hanger/stand I designed in FreeCAD that attaches to a standard American folding table top that is 16.7mm thick. It is designed with the Sony Studio Monitor MDR-7506 headphones in mind, but obviously any set of…
How I mounted a WeatherFlow Tempest weather station to my backyard fence gate post. Print Settings Printer Brand: Prusa Printer: i3 MK4 **Rafts:** No Supports: No **Resolution:** .2 mm Infill: 35% **Filament:** SUNLU PLA+…
Bought a Dasco Pro 6-Piece roll pin punch set that just comes loose. Designed a tool stand to hold them upright and on my workbench for easy access. Print Settings Printer Brand: Prusa Printer: i3 MK2S Rafts: No Supports: No Resolution:…
Sensor wire that runs a long the top of the garage door opener track was hanging down and there weren't enough plastic clips to hold it all in place. So I designed one in FreeCAD and printed several up. Print Settings Printer Brand: Prusa…
I made a small table out of scrap plywood and a set of 28 Inch Hairpin Table Legs, (3 Steel Rods 1/2 Inch Pipe Diameter). The provided floor protectors kept falling off the bottom of the legs, so I designed my own. I also wanted to…
Bought a new soldering station that uses Hakko T12 compatible soldering tips, the ones with the embedded temperature sensors. Then bought a set of 10 T12 tips to go with it. This is a stand to hold the tips and a cleaning sponge. I used a…
My Bostitch impact wrench quit working or rather wouldn't stop working. Whenever I attached the air hose it would immediately start spinning and wouldn't stop. I disassembled the air valve mechanism and discovered that the valve seal…
I designed this IoT USB powered motion sensor so it could be powered by any old USB phone charger laying around the house. It requires soldering and It uses the following components: Electronics perf board 22Ga. wire 2.54mm female pin…
UPDATE: Added version 2 stl file. The 1st version failed South Carolina's May heat. The metal ball popped out when I pulled on the base. Version 2 has a much firmer fit. I already had a ProClip Angled Dash Mount installed in my car from a…
These are all currently available results.
