Counting matching models…
This is a slip-on spacer for use with full size 16 round magazines in a TX22 Compact. Nothing holds it in place other than friction, easy to remove if you're sharing mags between different TX22's. The photo of three mags shows (L-> R) the…
This is made to assist in loading 9mm ammo into Glock style magazines. I bought a PCC, it was set up for Glock mags. I bought the mags and realized I didn't have a loader. I printed another design, but didn't like it, so I copied the…
These are simple plates to block off the area where the mirrors were if you remove them for track days or bar end mirrors. The countersunk version is meant to be used with 6mm countersunk fasteners. The buttonhead version is meant to be…
These are spacers for Ducati Multistrada windscreen that hold the screen about 23 mm above the stock mounting surface. They are intended to reduce helmet buffeting and should also fit 1200 and 950 V2 models. How well these work varies…
If you remove your passenger pegs you can bolt this in place to cover the holes. Needs 8mm socket head bolt to hold in place, the stock passenger peg bolts are too long and won't work. I suggest printing this upside down with supports,…
This is a 50 round ammo tray for the Smith & Wesson 617 10 shot revolver. I know that it works with SpeedyBeez speed loader and would assume it will work with others. 50 rounds to work with Steel Challenge stages 100 rounds because more…
I bought some Rossignol Tactic Ski Poles and wanted larger baskets for them. This is a quick design, nothing fancy, print it upside down and there is no need for supports. The pictures show an earlier version, the current version (v8) has…
This is a block off plate for the front turn signals on a USA-spec Aprilia RS457. If you remove the front signals you can bolt this plate in place of the missing stalk using a 6mm nut. These do not have to be very tight, just enough to…
This is a RAM mount that attaches to the steering stem nut. It uses an 8mm RAM ball that is sold/intended to be used with the handlebar clamp. An STL for the RAM ball and shaft are not included, I used one I had sitting around, but may…
These were used on the bodywork of various '90s era Ducatis. I know the 907 and Super Sport used them, probably other models too. Last I checked they were still available from Ducati but I needed a few for a trackbike and didn't care if…
I got tired of looking for a black loader in a black range bag so I copied the stock part and printed it in yellow. Nothing fancy here, print with supports.
This is a simple template for drawing a bullseye on a target. My local range provides targets with a lot of open space on them, so I draw some extra bullseyes on them with a Sharpie. This is not set up to any specific standard, it's just…
This is a battery box for use on the carb'd, belt drive Super Sports when you delete the stock airbox and use pod filters. It uses the pad from the stock battery box will only fit if you cut the tabs off the bottom of it. Assuming you…
This will cover the hole left in the fender when you remove the reflector. Attach with a 6mm nylock nut over a washer. Be careful not to over tighten, it only needs to be tight enough that it doesn't spin. Blank version has nothing on the…
This is a battery box for a 1991 - 1998 Ducati 900ss that is running pod filters instead of an airbox. It holds an EarthX ETX18B battery, starter solenoid mount, coils, and ignitor boxes. Interior dimensions of the box are 134mm x 66mm. A…
This is a RAM ball that the Insta360 "GPS Preview Remote" rubber mount can be put on if you don't have room on your bars. v2 is a plain design with no embossement on the end. v4 is 1mm larger in diameter than v2 so the remote mount fits a…
The main sections bolt on where the passenger pegs are supposed to go. The rear brace needs a small hole drilled in the tail section for the bolt that holds it on. I printed this with a carbon fiber infused nylon filament. I printed this…
This is a magazine block for a 9mm Ruger PC Carbine. The rifle can not fire with this installed but it does not satisfy the requirements for some competition shooting orgs because it does not fill the chamber. I may or may not add that…
There's not much useable space on the front of a Multistrada once you get a tank bag mounted, so I made up a ball mount to go on the mirror stalk. I intend to use it as a camera mount but I suppose if you don't mind killing bugs with your…
Ok let's be honest, when it comes to fastening bodywork and other bits, Aprilia makes some pretty dumb choices. For example - if you try to remove the mirrors for a trackday or whatever, you will discover that the nuts drop down behind…
This is an insert of CCI 100 round boxes that stores 40 rounds in a way that works with speed loaders. There is no space in the box for the actual loader, this holds ammo only. I print them upside down but it shouldn't really matter, no…
This is a loader intended to help when loading magazines for double stack 1911 or 2011 style pistols. Push the loader down onto the mag, push the round down and back against the tab on the loader, then slide the loader back up while…
Print this with the base flat on the build plate. No supports needed. The body of the mag block will print at an angle which is not a problem. Use whatever material you think will stand up to the temperatures your PCC will see in use. The…
License plate mount for 1991 - 1998 Ducati Supersport. Uses 6mm fasteners. Sized for a Michigan USA plate with 146mm x 70mm bolt pattern. License plate hides entire front of mount. Category: Automotive
This is to mount a Bryton bike computer to an MTB stem. The mounts included with my Rider 450 were worthless for my YT Jeffsy, so I made this up to hold it on the stem. Once it's printed you can attach the stock Bryton 1/4 turn mount…
This is a remix of Drazen's bash guard with the outer edge moved out roughly 3mm to fit a 32t chain ring. Forgive the screw driver fasteners, they're all I had sitting around at the moment. Choose your own print settings. I used 0.6mm…
This is a camera mount that is intended to go over the mirror for a front mounted camera. I printed it a year ago and still haven't mounted it because it takes very long fasteners to reach through the mount and the mirror. Because I…
This is a hanger to hold a range bag in place on the side of a shelving unit or a wall. The bag took up way too much space on the shelf so I put this together. The bag in question was a Savior brand rifle bag but anything with a handle at…
This is a points cover for a narrowcase Ducati. It has the O-ring seal built in so should be printed with TPU. Forgive the red color, that part was to test the geometry and settings were used to speed the print, not to get the best…
Battery mount so stock battery straps can be used when putting an EarthX lithium battery in a 1991 - 1998 Ducati Super Sport Category: Automotive
New handle for Sterilite bin 1896N3 Print with TPU so it's flexible, it will not work with rigid filaments. (It prints out flat). I suggest printing it face down, not on it's edge as shown. You must use supports for the ends but can…
S3 Range carts. For the most part they are very nice, I like mine a lot. However... the clamp set up they have to hold a rifle scabbard on the cart is absolute trash. This is a bushing I threw together as a quick fix before a match. It's…
Evotech makes a nice tail tidy, but it's not set up for the size plate we use in the USA. This one is set up specifically for Michigan plates. Bolt pattern for pate is 146mm x 70mm Use 6mm hardware to attach this to the tail tidy and the…
These are all currently available results.
